Rebuild SSS (Super Strut Suspension), SSS |
Rebuild SSS (Super Strut Suspension), SSS |
Jan 10, 2017 - 10:42 AM |
|
Enthusiast Joined Jan 10, '17 From Russia, Izhevsk Currently Offline Reputation: 0 (0%) |
I brought to you how I solved the problem with a thud on the suspension arms SSS.
I really like to use it SSS suspension arms, because I had the opportunity to compare with McPherson suspension, because like last machine was ST-202. But after the purchase, I discovered a terrible knock on all the front suspension, which has been difficult to locate. I started to deal with this problem. This post has been edited by Wild202: Apr 13, 2018 - 3:20 AM -------------------- Email - vad07@inbox.ru
|
Jan 15, 2017 - 9:56 PM |
|
Enthusiast Joined May 2, '15 From NY Currently Offline Reputation: 3 (100%) |
That is a lot of work. Looks like you had to break the joints apart, and then machine your own parts to put them back together?
How are the rebuilt parts holding up long term? |
Jan 16, 2017 - 2:44 AM |
|
Enthusiast Joined Jan 10, '17 From Russia, Izhevsk Currently Offline Reputation: 0 (0%) |
That is a lot of work. Looks like you had to break the joints apart, and then machine your own parts to put them back together? How are the rebuilt parts holding up long term? Yes, of course I make out, I have made a new sleeve for ball joints. Then all I gathered back. The work there is really a lot. Even more accurate measurements and tolerances. As I said earlier, I made my suspension arms 3 years ago, since that time I have and go. The machine is used every day in summer and winter. -------------------- Email - vad07@inbox.ru
|
Lo-Fi Version | Time is now: March 29th, 2024 - 3:06 AM |