6G Celicas Forums

Welcome Guest ( Log In | Register )

> "TRDGT4", Dyno results are in!!!!
post May 4, 2008 - 1:05 AM
+Quote Post
TRDGT4



Enthusiast
**
Joined Mar 3, '08
From New Zealand
Currently Offline

Reputation: 1 (100%)




well here's a bit of history of my Celica Gt4 "TRDGT4"
Bought the completely standard about four years ago after a few mods it look like this

And then by the end of 2007 it look like this

but then i had problems BIG problems

The Thurst washers in the engine came out causing major engine damage luckly the pistons and rods were unharmed and would live another day so that brings us into the rebuild:

engine out it was then a case of stripping everything out of the engine bay for a complete respary in classic 040 Toyota white

While the car was getting its new coat of paint I source another block and began the rebiuld I also managed to get a complete engine from a GTT Caldina for which I used the Head and Intake including injectors, I then set about match porting the head and having a custom set of cams ground which included facing the Valves and having all the seats recut with a custom three angle profile and have all the tappets set with custom shims, I also added some HKS adjustable cam gears and had the intake manifold ceramic coated. The block got rebored out .5mm and the bottom end was balanced and block decked
New Engine

new engine being fitted

So now with the engine back in the hole the custom wiring job started and after 20 hours (that's just on the wiring) it runs
but not fully completed and ready for road yet (hanging out to drive her again though)
below are a few pics of the work that has gone in






I'll keep adding pics as i get closer to driving her enjoy

This post has been edited by TRDGT4: Nov 3, 2015 - 2:53 PM


--------------------

_______________May COTM 2011_______________
 
Start new topic
Replies
post May 29, 2008 - 8:23 PM
+Quote Post
Celica_Kid95st



Enthusiast
***
Joined Feb 24, '05
From Pittsburgh, PA
Currently Offline

Reputation: 0 (0%)




Videos! Videos! I want to hear this beast. Great work man. I love every square inch of it biggrin.gif

Posts in this topic
- TRDGT4   "TRDGT4"   May 4, 2008 - 1:05 AM
- - Valo666   holy crap....that is one sexy lookin motor...very ...   May 4, 2008 - 1:14 AM
|- - TRDGT4   QUOTE(Valo666 @ May 4, 2008 - 1:14 A...   May 4, 2008 - 1:18 AM
- - lagos   WOW thats an incredible car you have there! I...   May 4, 2008 - 1:25 AM
- - Rusty   QUOTEa GTT Caldina for which I used the Head and I...   May 4, 2008 - 2:19 AM
- - Insanity-74   Very Impressive   May 4, 2008 - 2:49 AM
- - _mikeE   WOW   May 4, 2008 - 2:57 AM
|- - stevest202   dedication at its highest respect to you   May 4, 2008 - 3:13 AM
- - x_itchy_b_x   awesome build man. thats s clean bay!   May 4, 2008 - 12:01 PM
- - zero07   I have much engine envy.   May 4, 2008 - 12:09 PM
- - snapshotgt   Nicely done.   May 4, 2008 - 12:32 PM
- - TRDGT4   cheers guys I have just ordered a brand new set o...   May 4, 2008 - 3:47 PM
- - supershannon77   Thats awesome work..i bet ur itching to drive it.   May 4, 2008 - 6:07 PM
- - TRDGT4   oh hell yeah even more so once it's run in and...   May 4, 2008 - 6:32 PM
- - Celicav   That is going to be one heck of a beast! PLEA...   May 4, 2008 - 10:28 PM
- - Defgeph   Beautiful.   May 4, 2008 - 11:16 PM
- - trdproven   that looks wicked.   May 5, 2008 - 12:20 AM
- - Rusty   QUOTEthe car going into the Performance Car Mag I...   May 5, 2008 - 1:10 AM
|- - TRDGT4   QUOTE(Rusty @ May 5, 2008 - 1:10 AM)...   May 5, 2008 - 3:29 AM
- - cjh4l22   WOW simply put, WOW   May 6, 2008 - 10:19 AM
- - Rusty   oh sweet not long then   May 7, 2008 - 1:24 AM
- - malpaso   looks amazing...   May 7, 2008 - 8:04 AM
- - fran   WOW! really good job dude! i like a looooo...   May 7, 2008 - 12:52 PM
- - dtlwrc   WOW!!! Great project and great car...   May 7, 2008 - 5:03 PM
- - 99GT   Will the 4th gen intake manifold bolt up on a 3rd ...   May 7, 2008 - 6:22 PM
|- - TRDGT4   QUOTE(99GT @ May 7, 2008 - 6:22 PM) ...   May 7, 2008 - 6:54 PM
- - TRDGT4   Pluming up the oil cooler In the process of mak...   May 7, 2008 - 7:00 PM
- - 99GT   You got some DEEP pockets.   May 7, 2008 - 7:59 PM
- - TRDGT4   nah i just spend it before the misses nah i got...   May 7, 2008 - 8:01 PM
- - 99GT   Is it true that the COP is same as 2000+ celica?   May 7, 2008 - 8:32 PM
- - TRDGT4   sorry what is COP? i'm having a blonde moment ...   May 7, 2008 - 9:26 PM
- - addictions   o my god...... that is the best (one of the best) ...   May 8, 2008 - 8:50 PM
- - Rusty   Wow whats this going to be used for?   May 8, 2008 - 8:51 PM
- - 99GT   Coil on plugs...   May 8, 2008 - 8:52 PM
|- - TRDGT4   QUOTE (99GT @ May 8, 2008 - 9:52 PM)...   May 9, 2008 - 12:15 AM
- - Rusty   got another update?   May 12, 2008 - 1:54 AM
|- - TRDGT4   QUOTE (Rusty @ May 12, 2008 - 2:54 A...   May 12, 2008 - 3:01 AM
- - Rusty   QUOTE Hopefully the coils will be here this weeken...   May 13, 2008 - 2:10 AM
- - TRDGT4   IT'S ALIVE!!!!!!! ...   May 18, 2008 - 12:08 AM
- - Rusty   big congrates mate well done   May 18, 2008 - 1:34 AM
- - 99GT   PICS   May 19, 2008 - 9:18 PM
- - TRDGT4   here are a few pictures of her just after her firs...   May 27, 2008 - 11:04 PM
- - Rusty   loving it, those new lights look flash, how much f...   May 28, 2008 - 1:05 AM
|- - TRDGT4   QUOTE (Rusty @ May 28, 2008 - 2:05 A...   May 28, 2008 - 3:04 PM
- - parriehunter   Looking nice. Wish I could afford a GT4...we can ...   May 28, 2008 - 3:38 AM
- - 808celica   can i steal your car???? lolz sick just purely sic...   May 28, 2008 - 3:47 AM
- - Celica_Kid95st   Videos! Videos! I want to hear this beast....   May 29, 2008 - 8:23 PM
- - TRDGT4   thanks for that as for Videos i'll wait untill...   May 29, 2008 - 9:40 PM
- - Rusty   plus you want to let her run in for a bit   May 30, 2008 - 12:35 AM
|- - stevest202   hi there wot a fantastic project it looks absolute...   May 30, 2008 - 5:08 AM
- - PHLCELICA   That's some sick work!! E-Mail me if y...   Jun 1, 2008 - 12:27 AM
- - ice23q   I like the engine bay ALOT. do you have any pics o...   Jun 5, 2008 - 4:52 AM
- - TRDGT4   lets just say they are now hiding behind some stai...   Jun 5, 2008 - 5:15 AM
- - TRDGT4   here is a quick vid of a run today hasn't been...   Jun 8, 2008 - 12:21 AM
|- - DEATH   QUOTE (TRDGT4 @ Jun 8, 2008 - 1:21 A...   Jun 13, 2008 - 8:35 AM
|- - TRDGT4   QUOTE (DEATH @ Jun 13, 2008 - 8:35 A...   Jun 14, 2008 - 11:03 PM
- - Rusty   nice run, what revs were you taking it up to?   Jun 8, 2008 - 12:59 AM
- - TRDGT4   can't really tell at moment tacho not working ...   Jun 8, 2008 - 1:31 AM
- - zCelicaDude   hey... another nz'er with a lot of work done t...   Jun 11, 2008 - 4:00 PM
- - gt4uk   simply beautiful..u done the ST205 proud!   Jun 13, 2008 - 3:51 AM
- - Rusty   QUOTE Man I love your work - very beautiful job ma...   Jun 13, 2008 - 6:55 PM
- - stryue_19   hey how long did it take u to put everything on?   Jun 14, 2008 - 11:52 PM
|- - TRDGT4   QUOTE (stryue_19 @ Jun 14, 2008 - 11...   Jun 15, 2008 - 3:51 PM
- - TRDGT4   so a real quick update for you all the wiring is n...   Jun 27, 2008 - 11:41 PM
- - TRDGT4   Some More Pic's   Jul 7, 2008 - 5:01 PM
- - celicaGT96   omg i love ur car mann   Jul 7, 2008 - 10:25 PM
- - parriehunter   That looks awesome.   Jul 7, 2008 - 10:27 PM
- - Rusty   for run 1 is that on SH1 just outside woodvile? I...   Jul 8, 2008 - 2:17 AM
|- - TRDGT4   QUOTE (Rusty @ Jul 8, 2008 - 3:17 AM...   Jul 8, 2008 - 6:05 PM
- - GriffGirl   This should be 6gc's next Featured Ride IMO...   Jul 8, 2008 - 6:12 PM
|- - TRDGT4   QUOTE (GriffGirl @ Jul 8, 2008 - 6:1...   Jul 8, 2008 - 11:50 PM
- - parriehunter   Hey, Is there still talk about your car being in p...   Jul 8, 2008 - 8:23 PM
- - tomazws   Beautiful car! Thanks for all the amazing pict...   Jul 10, 2008 - 12:20 PM
|- - TRDGT4   QUOTE (tomazws @ Jul 10, 2008 - 12:2...   Jul 20, 2008 - 11:15 PM
- - Rusty   QUOTE for sure if you are in the area pop in and i...   Jul 21, 2008 - 1:22 AM
|- - TRDGT4   QUOTE (Rusty @ Jul 21, 2008 - 1:22 A...   Jul 21, 2008 - 1:57 AM
- - Rusty   thats ok i'm off to aussie for a bit, plus i g...   Jul 22, 2008 - 2:20 AM
- - TRDGT4   well i'm Famous well in New Zealand at least ...   Jul 22, 2008 - 6:08 PM
|- - parriehunter   QUOTE (TRDGT4 @ Jul 22, 2008 - 6:08 ...   Jul 22, 2008 - 8:46 PM
|- - TRDGT4   QUOTE (parriehunter @ Jul 22, 2008 - 9...   Jul 22, 2008 - 10:02 PM
- - parriehunter   Sweet.   Jul 22, 2008 - 10:07 PM
- - Rusty   I know you will, cant wait   Jul 23, 2008 - 1:27 AM
- - TRDGT4   Well got my set of custom floor mats back today so...   Jul 31, 2008 - 11:29 PM
- - Rusty   nice tidy clean + where did you get them? I'd...   Aug 1, 2008 - 12:03 AM
- - parriehunter   Those mats look sweet, how much were they?   Aug 3, 2008 - 12:12 AM
|- - TRDGT4   QUOTE (parriehunter @ Aug 3, 2008 - 1...   Aug 3, 2008 - 1:52 AM
- - parriehunter   Thats real cool. I'm Jealous. they fit real go...   Aug 3, 2008 - 2:10 AM
|- - TRDGT4   QUOTE (parriehunter @ Aug 3, 2008 - 2...   Aug 3, 2008 - 3:32 PM
|- - BloodyStupidDavey   QUOTE (TRDGT4 @ Aug 3, 2008 - 9:32 P...   Oct 23, 2008 - 2:23 AM
- - Rusty   they wouldn't have any spears ones round at yo...   Aug 4, 2008 - 1:26 AM
|- - parriehunter   QUOTE (Rusty @ Aug 4, 2008 - 1:26 AM...   Aug 4, 2008 - 6:41 AM
- - TRDGT4   sorry boys no spares. well not much happening at ...   Sep 4, 2008 - 11:50 PM
- - parriehunter   F**K YEA. Those rims will look magic.   Sep 7, 2008 - 3:37 AM
- - TRDGT4   weel just a quick update engine is run in and hav...   Oct 22, 2008 - 11:01 PM
- - whatthe   nice white 6 spoke rims man !!!, cant ...   Oct 23, 2008 - 2:39 AM
- - 99GT   Can you take like tons more pics of your engine ba...   Oct 23, 2008 - 9:50 AM
- - TRDGT4   and one of the White Rims   Oct 28, 2008 - 9:50 PM
|- - whatthe   QUOTE (TRDGT4 @ Oct 29, 2008 - 1:50 ...   Oct 28, 2008 - 10:50 PM
- - parriehunter   Man thats looking awesome. Thats rims look amazin...   Oct 28, 2008 - 10:06 PM
- - TRDGT4   yeah not long now will be good to finally see what...   Oct 28, 2008 - 10:45 PM
4 Pages V   1 2 3 > » 


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 7:21 AM