6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> The OFFICIAL 6GC NA Dyno charts, Please post yours
post Jan 10, 2008 - 1:55 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




Ok Guys, here it is, the Official 6gc NA Dyno Thread.

THIS IS NOT A DISCCUSSION THREAD. DO NOT POST IF YOU DO NOT HAVE A DYNO SHEET TO POST. ALL OTHERS WILL BE DELETED

just to be clear, DO NOT post your "estimates" or guesses. this is for dynosheets, and runfiles if you have them.

The OFFICIAL 6GC Turbo Dyno registry is here.


Please list your:
Year:
Model:
Engine:
Significant mods:
Octane:
Dyno sheets/runfiles:
Your Celica’s stats (kW/HP etc @ engine/flywheel & Torque etc etc) and any other info like weather/ temperature which could have effected it.

THANKS

This post has been edited by presure2: Jan 10, 2008 - 6:05 AM


--------------------
post Jan 10, 2008 - 4:46 AM
+Quote Post
Slick



Enthusiast
***
Joined Jan 10, '06
From Mozambique, Africa
Currently Offline

Reputation: 8 (100%)




Year: 1994
Model: ST202 hatchback
Engine: 3SGE
Significant mods: Injen cone filter, free flow exhaust, and unichip
Octane: can't remember.
Dyno sheets/runfiles:
IPB Image
Can't remember the weather conditions.



--------------------
IPB Image

"Remember, amateurs built the ark and professionals built the Titanic. But revolutionaries built the Celica!"- Me
post Jan 11, 2008 - 3:29 PM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




1996
Toyota Celica SS-II (ST202)
3S-GE (3rd gen)
stock with HKS mushroom filter
91 octane



Power: 108kW @ wheels / 145HP
133kW @ flywheel = 178HP


--------------------
post Jan 11, 2008 - 11:55 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




IPB Image

1995 GT 158K miles
2.2l 5s-fe
hardwelded camshafts (grind 294)
header, cat back exhaust

123.59 hp @ 5811 rpm
126.84 tq @ 4179 rpm


--------------------
post Feb 29, 2008 - 1:31 AM
+Quote Post
94celicadude



Enthusiast
***
Joined Mar 28, '04
From St.Louis
Currently Offline

Reputation: 15 (100%)




IPB Image

IPB Image

Power Chart (Blue = Before Tune Red = After Tune)

Year: 1994

Model: ST204

Engine: 2.2L 5-SFE

Significant mods: Long Tube Headers, Full Custom CAI w/ K&N, Full 2.5" Exhaust, Timing Advanced as much as possible on distributor, cleaned injectors, AFC-Neo w/ Tune by professional shop

Octane: 93


--------------------

1994 GT Hatchback
1994 ST Coupe
1988 Corolla Wagon All-Trac
1999 Corvette
2008 Cobalt SS Turbo
post Sep 12, 2008 - 9:14 PM
+Quote Post
parriehunter



Enthusiast
***
Joined Jan 13, '08
From Christchurch New Zealand
Currently Offline

Reputation: 0 (0%)




Just Did a Dyno run today smile.gif

Year: 1994
Model: ST202
Engine: 3SGE
Significant mods: Pod Filter
Octane: 95
Dyno sheets/runfiles:


Stats
106kW / 6780rpm at the wheels (144 hp)
158 Nm / 4670 rpm at the wheels

Seems like the motor is still healthy considering new they reckon 130kW at the fly -20% for drive train. pretty good. Im rapt.

A GT-T Caldina only did 118kW a the wheels.

This post has been edited by parriehunter: Mar 2, 2009 - 11:33 PM


--------------------

1994年 トヨタ 神々しい My Facebook My Bebo

QUOTE (loll6g @ Nov 6, 2008 - 5:53 AM)
automatics are for lazy ass drivers who jst want there car so that they can look cool
post Dec 11, 2008 - 1:31 PM
+Quote Post
spookey

Enthusiast

Joined Dec 11, '08
From CZ
Currently Offline

Reputation: 0 (0%)




dyno test from 10th December 2008

Chart from static test (discrete measuring, only in 5 points)


Chart from dynamic test (continuous measuring)


Can anybody explain the power curve above 7000 rpm, where is power peak ? and what does it means those oscilating curve, is this error of measuring or what ? Man who made these measuring have not seen anything like that yet.

This post has been edited by spookey: Dec 11, 2008 - 1:33 PM
post Aug 13, 2009 - 12:14 PM
+Quote Post
Temporary-Failur...

Enthusiast
*
Joined May 27, '09
From Finland
Currently Offline

Reputation: 0 (0%)




Year: 1994
Model: ST202
Engine: 3SGE
Significant mods: none
Octane: 95
Dyno sheets/runfiles: HERE!!!
133kW / 221Nm.

There's some noise around 4000RPM which was caused by some kind of sensor failure of the dynamometer. So really torque is not quite 221Nm.

This post has been edited by Temporary-Failure: Aug 13, 2009 - 2:59 PM
post Oct 19, 2009 - 2:57 AM
+Quote Post
HerosBlade



Enthusiast
*
Joined Mar 22, '09
From Oahu, Hawaii
Currently Offline

Reputation: 0 (0%)




808celica aka Jons dyno at Munkey Works Garage



Engine: 5sfe
Mods: Short Ram Intake, 2 1/4 axle back to 4 inch exhaust

Pushing 100.2 WHP 117.3 TRQ at 6182rpms


--------------------


The New Kid on the Block
post Oct 19, 2009 - 3:53 AM
+Quote Post
808celica



Enthusiast
*****
Joined Feb 24, '07
From Oahu, Hawaii
Currently Offline

Reputation: 23 (100%)




CAR SUCKS ASS!!!!!!!!!! wait till i post a pic of what happened after the dyno day. Very sad, very very sad...........


--------------------
I don't normally drive fast, but when I do its on a curvy section of this island
post Sep 16, 2010 - 5:44 AM
+Quote Post
fgvillegas

Enthusiast
*
Joined Mar 22, '10
From Philippines
Currently Offline

Reputation: 0 (0%)




Here's my share:



sorry for the small pic. photobucket automatically resize it.

Model: AE101
Year: 1996
Engine: 3rd Gen 3S-GE

Significant mods: cold-air intake, fabricated 2-3/8" exhaust pipe (crushed-bent, black iron), FGK headers, 5-Zigen muffler, lightened crank pulley, HKS camgears and 272 deg duration 9.3 lift Jun camshafts

Dyno sheets/runfiles:

160.11 whp @ 7,175 rpm
133.26 ft-lbs torque @ 4,800 rpm

Future plans:
- lightened flywheel
- mandrell bent exhaust pipes (2-3/8" stainless)
- standalone ECU
- reconnect my MSD ignition coil and amp

I hope to get not less the 10 additional whp and torque with my future plans.

post Jan 20, 2012 - 12:54 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




1996
Toyota Celica SS-II (ST202)
Gen 3 3S-GE
Cold airbox, HKS catback exhaust, trd leads
98 octane





Power: 116.7W @ wheels / 156.5HP
134kW @ flywheel = 178.9HP


--------------------
post Dec 5, 2012 - 4:42 AM
+Quote Post
miib14

Enthusiast

Joined Sep 23, '11
From UK
Currently Offline

Reputation: 0 (0%)




Model: AE101
Year: 1993
Engine: 3rd Gen 3S-GE Acis

Significant mods: Short ram intake, custom fabricated 2.5" exhaust pipe (mandrel-bent), oem 4-1 headers,



--------------------
★ 1993 Toyota Corolla Saloon ★

It's all about N/A Power ..... 184.1hp and 142lbft
post May 29, 2013 - 1:14 PM
+Quote Post
aspen

Enthusiast
**
Joined Nov 29, '07
From Colorado
Currently Offline

Reputation: 4 (100%)




5S-FE @ 5200 feet elevation.
Short ram intake.
91 Octane.


This post has been edited by aspen: May 29, 2013 - 1:16 PM


--------------------
2019 M2, 2005 S2000, 1997 4Runne
post Jun 4, 2013 - 2:34 AM
+Quote Post
wazzuu



Enthusiast

Joined Jan 14, '11
From Belgrade
Currently Offline

Reputation: 0 (0%)




Year: 1995
Model: ST202
Engine: 3SGE
Significant mods: CAI
Octane: 95
Dyno sheets/runfiles:



174,5 HP @ 7157 RPM, 184,1 Nm @ 5189 RPM
post Oct 18, 2013 - 4:52 AM
+Quote Post
onnaj

Enthusiast
**
Joined Sep 6, '12
From Holland
Currently Offline

Reputation: 1 (100%)




Year: 1998
Model: AT200
Engine: 4AGE 20V Blacktop
Significant mods: Open air intake
Octane: RON98
Comments: Dyno was taken only 2000 miles after rebuild with the stock (very restrictive) 7AFE exhaust and with the stock C52 gearbox with a Silvertop Flyhweel



--------------------
post Oct 30, 2013 - 10:06 PM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




Year: 1996
Model: ST202 SS-II
Engine: 3S-GE
Significant mods: Cold Airbox, TRD leads, HKS Catback Exhaust, Tom's TEC II ECU
Octane: BP 98




@ Wheels
123Kw = 165HP

@ Engine
141Kw= 189HP


--------------------
post Jun 28, 2015 - 2:28 PM
+Quote Post
doory100



Enthusiast
**
Joined Jun 21, '14
From Ottawa, Ontario, Canada
Currently Offline

Reputation: 0 (0%)




QUOTE (Batman722 @ Jan 11, 2008 - 11:55 PM) *


1995 GT 158K miles
2.2l 5s-fe
hardwelded camshafts (grind 294)
header, cat back exhaust

123.59 hp @ 5811 rpm
126.84 tq @ 4179 rpm

is that at the wheels?


--------------------
post Jun 28, 2015 - 9:45 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




yes.


--------------------
post Jun 29, 2015 - 9:58 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




Year: 1997
Model: GT
Engine: 3MZ-FE
Significant mods: 3MZ-FE swap, Injen CAI, E153 Trans,
Octane: 91 CA crap


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 3:47 AM