Never ending EGR problem/New code, crankshaft sensor |
Never ending EGR problem/New code, crankshaft sensor |
Jan 17, 2018 - 4:36 PM |
|
Enthusiast Joined Mar 6, '17 From Sacramento Currently Offline Reputation: 0 (0%) |
Hello everybody, hope all is well, and everyone's 6G are running strong. Awhile back, I got a check engine light, EGR, so I replaced the VSV, then replaced the modulator, and finally the EGR, drove it for quite awhile excited the light would go off....but it wasnt, had to get my car smogged, so I disconnected the battery for 2 hours and went to get it smogged, I passed the 25mph but failed the 15mph, "probably injectors" I was told, I had already been suspecting the injectors, but was having a hard time getting the right ones since my car is Fed/Canada, and not California. A few days later, check engine light came back on, with egr, I now have a crank shaft sensor code, from the research my friend and I have done it could many different things causing it. Put new injectors in last night, fuel filter and spark plugs, gonna smog it again today. If you guys have any advice to cure this egr problem, I would really appreciate it. The research I've done isn't giving any clear answers. Btw, my friend rebuilt my whole engine, cleaned everything, new gaskets/seals, flywheel, clutch, release bearing, rod bearings, etc...
|
Jan 22, 2018 - 11:30 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
are all the vacuum lines in the correct places? that will cause a problem. what EGR code are you getting?
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Jan 23, 2018 - 8:46 AM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
What are the exact codes and what were the actual passing and failing test results?
-------------------- |
Jan 23, 2018 - 7:24 PM |
|
Enthusiast Joined Mar 6, '17 From Sacramento Currently Offline Reputation: 0 (0%) |
My codes are p0401 p0402 I now have insufficient and excessive gas flow at the same time...
Crankshaft sensor code is now gone. |
Jan 23, 2018 - 10:47 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I meant what were the passing 25mph test results and the failing 15mph test results.
-------------------- |
Jan 25, 2018 - 9:32 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
My codes are p0401 p0402 I now have insufficient and excessive gas flow at the same time... Crankshaft sensor code is now gone. thats what i was getting on mine, I replaced the VSV under the intake manifold. that fixed it -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Jan 26, 2018 - 9:23 PM |
|
Enthusiast Joined Mar 6, '17 From Sacramento Currently Offline Reputation: 0 (0%) |
That was the first part I replaced, a long with the modulator and the egr itself. I tried to have it smogged again, and I was "borderline passing"...but I had disconnected the battery, gas I didn't let it run long enough before going to smog.
My codes are p0401 p0402 I now have insufficient and excessive gas flow at the same time... Crankshaft sensor code is now gone. thats what i was getting on mine, I replaced the VSV under the intake manifold. that fixed it |
Lo-Fi Version | Time is now: March 29th, 2024 - 6:29 AM |