|
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
|
Distributor questionHello I just purchased a 3sgte distributor & wires and its has the 5mm clip setup. Is there anyway I can get this to work on my Gen 2 JDM 7mm setup? What do I need to make it work or should I just...
|
3
|
onlyfreddie |
1,158 |
May 13th, 2014 - 1:25 PM Last post by: Smaay |
|
Turbo header manifold for a 7AFEI can't seem to find a manifold that will work, does anyone have any knowledge on this? im building my own. All the kits dont come with a manifold.
|
1
|
Rooster92 |
1,260 |
May 12th, 2014 - 8:49 AM Last post by: Smaay |
|
charge coolerhi does anyone know how much coolant a 1995 celica gt4 wrc charge cooler holds from empty please
how much coolant from empty
|
7
|
barmyhawkins |
1,302 |
May 11th, 2014 - 11:21 AM Last post by: richee3 |
|
charge cooler to turbodoes anyone know what size the pipe is from the turbo to charge cooler on a 1995 toyota celica gt4 wrc please
|
2
|
barmyhawkins |
1,323 |
May 10th, 2014 - 3:29 PM Last post by: barmyhawkins |
|
charge cooler hosesi have brought silicone hoses for my charge cooler there is 5 but i can only be sure where one goes. can anyone post any pictures or please describe to me where the other 4 go. please many thanks
silicone change over.
|
3
|
barmyhawkins |
1,572 |
May 8th, 2014 - 12:21 PM Last post by: barmyhawkins |
|
resonater boxhi all have fitted a blitz sus air filter on my celica gt4 wrc version. the cold air feed is coming from the original place what used to feed standard air box. i just read an article on here from a ve...
removal
|
0
|
barmyhawkins |
1,321 |
May 7th, 2014 - 2:54 PM Last post by: barmyhawkins |
|
Ok Now Im getting UpsetOk guys need some help with the dreaded code 54 maybe if thats whats causing the issue. I know my IC water pump is the cause being its not the factory pump and wired directly to the acc. More importan...
Really looking for help here guys, please.
|
4
|
Lil-Joe101 |
2,622 |
May 6th, 2014 - 3:24 AM Last post by: yellowchinaman |
|
3SGTE swap - fuel pump relay/resistorI kinda have used the search, but was after an answer for an idot if anyone can help.....3SFTE is out (after blowing cylinder 3.....) and 3sgte rev 3 going in! A mechanic, not my self, is doing t...
|
5
|
digs |
2,360 |
May 1st, 2014 - 4:14 PM Last post by: digs |
|
Name this exhaust ->I needed a full exhaust for my swap, I saw this for a good price and bought it. I am not sure who makes it, anyone guess? I have seen HKS and Apexi units that look similar in the tip and muffler des...
|
9
|
mr2driver |
2,346 |
April 29th, 2014 - 6:57 PM Last post by: JoshuaM |
|
gen 3 3sgte tuning options??Hey guys been searching a while an running my 3rd gen 3s on stock ecu an map for 3 years on 17lbs. Love the swap an the car.. but i have been reading about the greddy emanage an hearing nothing but ba...
which do u prefer?
|
10
|
celiracer |
6,692 |
April 27th, 2014 - 7:20 PM Last post by: paul52 |
|
|
3
|
onlyfreddie |
3,094 |
April 24th, 2014 - 9:08 PM Last post by: lagos |
|
air to fuel ratioMy GT4 with a jap-spec 3sgte and euro ecu is showing typically 14-15 on my air/fuel gauge. Is this too lean? My mechanic said that i shouldnt use the jap-ecu on 95 octane... Im running 15 psi turbo pr...
is 14-15 too lean?
|
9
|
skogs |
2,651 |
April 24th, 2014 - 2:34 PM Last post by: mgnt232 |
|
3sgte No Boost & hesitation2nd gen 3sgte swap is hesitating and won't boost. Got 3 codes - 35, 43 & 71. MAP sensor, Starter sensor & EGR valve. Retried removing MAP, no change.Replace MAP sensor, no change. No EGR s...
35 & 43 CEL's
|
3
|
cjh4l22 |
1,973 |
April 23rd, 2014 - 6:21 AM Last post by: Smaay |
|
2nd gen 3sgte in a 6gc?I have the chance to m jump on a rebuildable 2nd gen 3sgte super cheap. Its going to need a piston at the least. But my question, is it a practical project to take on? Will it swap in with a custom ha...
|
5
|
slo_celly |
1,314 |
April 18th, 2014 - 4:39 PM Last post by: Box |
|
|
26
|
lagos |
18,702 |
April 15th, 2014 - 7:52 AM Last post by: slo_celly |
|
Performance problem on this setupHello guys.here is my setup:Custom Manifold with 46cm runners and 38mm inside diameter pipes garret T04E turbo exhaust side 0.69Custom downpipeApexi PFC Tuned to local tunerFMICgtr bovstraight intake...
|
2
|
superhardware |
1,807 |
April 15th, 2014 - 4:15 AM Last post by: superhardware |
|
3rd gen 3sgte speed limiter?well tonite on the freeway on the way home i got the car up to around 120 and then it kinda shut down as if there were a speed limiter on it? it felt exactly like what happend when i hit 118 in my 01...
does it have one?
|
9
|
urbandork |
6,005 |
April 13th, 2014 - 6:28 PM Last post by: Batman722 |
|
NEED HELP AGAINWhere is the MAF sensor on the 3rd gen 3sgte and anyone help me here. Pics would be greatly appreciated.
3rd gen MAF
|
3
|
Lil-Joe101 |
1,524 |
April 11th, 2014 - 3:52 AM Last post by: Box |
|
|
47
|
Smaay |
21,238 |
April 10th, 2014 - 12:19 PM Last post by: ILoveMySilly97 |
|
I need options and wtb a 7afe or 4afe turbo manifoldI have been looking and looking and it looks like i have only three options,'1. Buy a 80 dollar 7afe flange and a b series turbo manifold and pay to have the flange cut off and rewelded ~ $25...
WHAT OPTIONS ARE THERE
|
2
|
hdnseek |
2,337 |
April 8th, 2014 - 11:16 AM Last post by: Syaoran |
|
Intercooler water PumpDoes anyone know the size of the intercooler water pump? Outlet/Inlet size, power output, pump speed, and overall diameter? Im looking in to getting a newer, lighter, and efficient water pump.Unless t...
Need Some Info Please Guys
|
5
|
Lil-Joe101 |
2,432 |
April 7th, 2014 - 9:26 AM Last post by: Sunny |
|
wastegateHihas anyone done a how to guide on how to install a external wastegate on the 3sgte?as im looking at fitting one.thanks
any how to guides?
|
6
|
dark_knight |
2,552 |
April 5th, 2014 - 3:15 PM Last post by: dark_knight |
|
3SGTEI did a little work trying to figure out how to properly delete the A/C compressor.This is the old set up I had.Clearly not the right way. After looking at a EPC and going to Toyota we have found this... 12
No A/C No Problem
|
36
|
Defgeph |
173,976 |
April 5th, 2014 - 10:22 AM Last post by: mkernz22 |
|
Fuel problemSo ive had my swap completed for quite some time and its always ran overly rich. A little background, Its a 94 with an ST-185 3SGTE swap, stock boost, and 3inch exhaust all the way back. Its getting a...
Way to rich
|
3
|
6G94celica |
2,782 |
April 1st, 2014 - 11:17 PM Last post by: 6G94celica |
|
st205 WAIC wiringHi,I'm currently working on a st205 engine into a st202 (celica GT, european spec) swap. I bought the car with the 3sgte engine already in, but not connected (unfinished project). It is a jdm (RHD...
|
5
|
SDTS |
3,233 |
March 24th, 2014 - 4:36 PM Last post by: Sunny |
|
Which 3sgte gen is best ?Sorry if this was discussed, if so can someone send me the link plz.I need to know which gen is best for our cars. What I mean by best is fitment. Thanks guys ! Is this an option ? http://www.jdme...
|
13
|
CrossCudi |
3,985 |
March 22nd, 2014 - 4:47 PM Last post by: enderswift |
|
Overboosting.Hi guys, Im having problems with boost as I have decided to get rid of that crappy Forge W/G I had and put the stock one back on. When It was working properly the forge seemed to be able to hold and...
Not sure what im overlooking?
|
2
|
easternpiro1 |
1,345 |
March 18th, 2014 - 7:09 PM Last post by: lagos |
|
5SGTE Looking to build it right the first timePosted up on mr2oc because I see a lot more people there pushing into the higher hp ranges im looking for. Looking to hit around 600-700whp dyno queeen (incase anyone is a member on both sites just lo...
Need info, planning
|
14
|
mgnt232 |
3,522 |
March 18th, 2014 - 1:00 PM Last post by: mikaelhoglund |
|
TMIC removalhi im just wondering how you remove the TMIC on a st205?. thanks
|
5
|
insanescotsman |
1,593 |
March 17th, 2014 - 4:14 PM Last post by: insanescotsman |
|
mishimoto fmicive read mixed reviews thus far on this brand and would like to hear your guys thoughts on them.im thinkng of getting their M line series universal front mount i figured i would ask before making the...
|
10
|
DaTerrorist |
2,992 |
March 14th, 2014 - 7:03 AM Last post by: match220 |
|
3sgte rear main sealI rebuilt my gen ii 3sgte over the fall. New Toyota oem gaskets, machine work, new turbo etc. assembled it with engine lube and ran Mobil conventional 10-30 for the first 1500 miles. I recently did a...
Leaking after first oil change
|
7
|
garin |
1,388 |
March 12th, 2014 - 2:26 PM Last post by: garin |
|
Apexi power fc difference st205?Hi teamBit of a question i am hoping someone knows the answer to!?Once upon a time i had a st205 power fc ap engineering version ecuIt worked very well. I understood an ap engineering version is m...
Powerfc
|
1
|
jbod |
2,888 |
March 12th, 2014 - 9:32 AM Last post by: 83841 |
|
intercooler installdoes anyone know where to find a decent how to on an FMIC install on a st205 with 3s-GTE?
|
7
|
insanescotsman |
2,297 |
March 11th, 2014 - 5:47 PM Last post by: match220 |
|
FMIC installHi guys, well its probably been covered 1000 times previously i tried to do search but couldnt find much probably didnt seach it properley. Anyway im looking to install a FMIC on my St205 , ive notice...
|
15
|
3sgte205 |
13,819 |
March 11th, 2014 - 11:49 AM Last post by: insanescotsman |
|
|
14
|
match220 |
3,694 |
March 10th, 2014 - 9:22 PM Last post by: match220 |
|
blow off valve.Hi just wondering how i change my blow off valve on my GT-4? anyone else done this?
|
2
|
insanescotsman |
1,486 |
March 7th, 2014 - 4:35 PM Last post by: insanescotsman |
|
My 7afe TURBO project[color="#FF0000"][/color]Hi Guys ..Iam new member in this forum and i benefited a lot after i read the topics..in this week i will start my project in my Corolla Engine 7A-FE .. I know alot...
|
17
|
RoadRunner |
4,446 |
March 3rd, 2014 - 8:40 AM Last post by: holdmywetnutz |
|
NOSdoes anyone run nos on a JDM spec 3S-GTE? was considering it but i dont want to damage the engine. does anyone think it could take like a 75HP shot?
|
6
|
insanescotsman |
1,952 |
March 2nd, 2014 - 10:41 PM Last post by: Neon90424 |
|
7afe arp bolt replacement found!!!Renault/cleo 16v arp bolts work if yoy dont belive xheck out my 7Afe youtube video https://www.youtube.com/watch?v=rRScZHXAZOA...be_gdata_player
found arp bolts that fit stock afe/7age rods
|
11
|
holdmywetnutz |
2,982 |
March 1st, 2014 - 10:53 AM Last post by: holdmywetnutz |
|
Long term living room projectSince i have pretty much completed my gt four engine wise. machined and head kit also installed. I feel like building a 10k rpm engine with a 3sgte. I was looking at 3sgte's and I have decided to... 12
Looking to build a 10k rpm 3sgte
|
39
|
Neon90424 |
11,414 |
February 27th, 2014 - 1:35 AM Last post by: Neon90424 |
|
MBCjust curious if any one has done a homemade MBC like http://www.dsmtuners.com/forums/articles-t...ller-works.html
|
2
|
DaTerrorist |
1,498 |
February 25th, 2014 - 11:57 AM Last post by: DaTerrorist |
|
3SFTE projectHi guys, don't post on here really as post on a UK celica forum.... but thought I would share what I have done to my SSI.Following the various 5sfte posts and guidance, I have now turbo'd my 3... 12
|
38
|
digs |
12,251 |
February 21st, 2014 - 3:55 PM Last post by: digs |
|
7agte STOCK RODS 400HPPut stock 7afe rods with renault cleo arp bolts to the test on my gt35r 7agte 23psi 387whp and 447whp 30psi
arp renault cleo rod bolts on 7afe rod
|
6
|
holdmywetnutz |
1,710 |
February 19th, 2014 - 3:33 PM Last post by: holdmywetnutz |
|
5sfte vs 3sgteSo I've been thinking. I'm about to tear down my current 5s motor again. Up till now, I've just been planning on keeping the block and head the same... But I've been tempted to give in...
So I've been thinking...
|
6
|
yfn16 |
1,922 |
February 18th, 2014 - 2:13 PM Last post by: Smaay |
|
3rd gen 3S with Evo 8 turboI got a stock Evo 8 turbo after helping a friend upgrade his car to a bigger setup, and I really wanted to try it out on my Celica. I've run the TD05 turbos on the Celica and they've been fan...
why not
|
0
|
scothaniel |
1,689 |
February 9th, 2014 - 11:41 AM Last post by: scothaniel |
|
Forged st205 GT3082r on STOCK ecu possible???Hi All, Just wondered if Amy of you guys could please shed some light on my problem...I have a forged st205 and was running a hks f con v pro with sard 800s and a gt3082r turbo. My F con has died!...
Help!!!
|
6
|
Dudleydaftdog |
1,671 |
February 6th, 2014 - 11:14 AM Last post by: Dudleydaftdog |
|
|
9
|
match220 |
2,154 |
February 4th, 2014 - 4:26 PM Last post by: JasonTX |
|
ct26 ct20b steel braided oil line kitsthought i would try and catalog the info i posted in the other thread since a couple have asked and the 'kit' is currently not the simplest/cheapest way to do this.first off, i cant speak to t...
|
2
|
JasonTX |
4,452 |
February 2nd, 2014 - 9:39 PM Last post by: JasonTX |
|
My 3rd Gen 3SGTE Swap ThreadSo as most of ya know, i've had jenns 94 GT setup with a 5sfte for just about 5 years now, and its time to move on.after going thru all the options we decided on a 3rd gen 3sgte for all the obviou... 123» 15
It lives!!! Pg8
|
296
|
presure2 |
73,878 |
February 2nd, 2014 - 6:41 PM Last post by: SwissFerdi |
|
rev problemhi, Does any one know why my gen3 3sgte is revving until 5.8K-5.9K? I have changed the rotor cap, rotor, wires, spark plugs, checked vacuum, fuel pressure and every thing is normal. My ignition mods...
gen 3 3SGTE
|
4
|
ssj3timy |
2,427 |
January 29th, 2014 - 10:07 PM Last post by: ssj3timy |
|
|