So toyota no longer makes the crank case hose that goes from block to cylinder head of the 3sge beams redtop motor.
Inner diameter is 7/8" and 6 " long. I was told the pvc valve hose or the one that recirculates unburnt gases from exhaust camshafts is same material as that. I cant seem to find a solution.
for those wondering, here is what you can purchase
the heat sleeve which is the 1.25" ID https://www.paragonperformance.com/Automotive?p=Fire-Sleeve
or use this heat resistant tape
https://shop.advanceautoparts.com/p/design-engineering-cool-tape-1-1-2-x-15-010408/16120023-P?navigationPath=L1*14932%7CL2*14983%7CL3*15320%7CL4*-49996484
blah blah
meh update
bumpity roo
dammit the 1" inner diameter hose is too big. i think the 3/4" is what you need???
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)