6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> May have found a solution, Throttle body and intake manifold 99 5sfe Federal emissions
post Mar 16, 2018 - 1:03 AM
+Quote Post
ST204GT83

Enthusiast
*
Joined Mar 6, '17
From Sacramento
Currently Offline

Reputation: 0 (0%)




Took my car to a shop for this EGR cel, they did all their tests and checked things out, no luck, can't figure it out, so they took my car to another shop, the tech has been working on cars for forty years and is familiar with toyotas. He thinks at one time, the throttle body and intake manifold were replaced because the plumbing for the vacuum lines isn't right or something like that, I'll have to talk to him again when I get my car. He drilled a hole in the throttle body, in one of the ports, which got the modulator to work, but there's a timing issue for the vacuum/egr, so it still throws the code at certain rpms. So, my request, if you have a Federal emissions 99 GT, can you post some photos of your engine, throttle body(attached and detached) intake manifold, vacuum lines, so I can see what it looks like. I tried Google, but it doesn't have much to offer.
post Mar 19, 2018 - 10:32 PM
+Quote Post
GripNSipp

Enthusiast

Joined Oct 30, '16
From SoCal
Currently Offline

Reputation: 1 (100%)




Do you have the factory service manual. There is all kinds of diagrams with notes on the differences. I could take some pictures of them for you if that might help
post Mar 20, 2018 - 7:49 PM
+Quote Post
ST204GT83

Enthusiast
*
Joined Mar 6, '17
From Sacramento
Currently Offline

Reputation: 0 (0%)




QUOTE (GripNSipp @ Mar 19, 2018 - 11:32 PM) *
Do you have the factory service manual. There is all kinds of diagrams with notes on the differences. I could take some pictures of them for you if that might help


There's nothing in the factory manual, at least the one I got.
post Mar 24, 2018 - 9:40 PM
+Quote Post
GripNSipp

Enthusiast

Joined Oct 30, '16
From SoCal
Currently Offline

Reputation: 1 (100%)






Sorry I'm not much help mine is cal-spec too I did hear about a guy who put a federal IAC valve on a Cal-spec throttle body who had some problems

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 6:08 PM