Printable Version of Topic
6G Celicas Forums _ My Project _ ST202+ Bakuu0
Posted by: Bakuu0 Jul 3, 2014 - 1:30 PM
ST202+
Engine: 3S-GE rev. 3 ,
TRD plug wires,
JDM ECU,
Oil Catch Tank D1
polyurethanes mounts
short intake with blitz filter, CAI
EGR out,
cooling plate
transmission:
E56 with exedy clutch
Suspension:
BC Racing coilovers,
polyurethanes,
many custom stuff,
custom front strut bar 3points,
17x8" Allutec, white,
17x7" DragWheels White,
16x7,5 oem st205 for track use,
Exhaust:
2,5", thermal insulation,
car catalyst out,
Other stuff:
JDM front projector headlights + 4300k, rear JDM lights
front ss3 and rear trd splitters,
Earl's brake lines,
underpanel aluminium,
fiberglass hood,
aerocatch
185hp/198nm
Some pictures:
More:
FB: https://www.facebook.com/pages/Life-on-track/536514216374269
YT: https://www.youtube.com/user/Bakuu0
B.
Posted by: jordisonjr Jul 4, 2014 - 12:06 PM
Damn nice looking car,
I didn't realize the 3sge made 185 hp!
Posted by: Bakuu0 Jul 4, 2014 - 12:19 PM
QUOTE (jordisonjr @ Jul 4, 2014 - 1:06 PM)
Damn nice looking car,
I didn't realize the 3sge made 185 hp!
3sge rev.3 after lifting 96> was 170hp, but there I've JDM ECU with 100 octane petrol, stainless exhaust pipe 2,5" with two straight mufflers, EGR out, short intake with CAI. That's all.
Posted by: KAOS Jul 14, 2014 - 11:59 AM
QUOTE (jordisonjr @ Jul 4, 2014 - 11:06 AM)
Damn nice looking car,
I didn't realize the 3sge made 185 hp!
That's why I swapped out the 5SFE for the 3SGE -
Posted by: BonzaiCelica Jul 14, 2014 - 10:20 PM
you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!
Posted by: Rusty Jul 15, 2014 - 4:17 AM
It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models
Posted by: Bakuu0 Jul 15, 2014 - 9:28 AM
QUOTE (BonzaiCelica @ Jul 14, 2014 - 11:20 PM)
you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!
QUOTE (Rusty @ Jul 15, 2014 - 5:17 AM)
It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models
I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.
Posted by: SwissFerdi Jul 15, 2014 - 10:47 AM
Excellent racecar build. Is that an Espace on track?
Posted by: Bakuu0 Jul 15, 2014 - 11:02 AM
QUOTE (SwissFerdi @ Jul 15, 2014 - 11:47 AM)
Excellent racecar build.
It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.
QUOTE (SwissFerdi @ Jul 15, 2014 - 11:47 AM)
Is that an Espace on track?
I do not know what it means. sorry for my language
Posted by: Mattattack Jul 15, 2014 - 11:42 AM
Paint and wheels are gorgeous, sheesh
Posted by: BonzaiCelica Jul 15, 2014 - 7:19 PM
ha hmm we learn something rusty.
Posted by: Rusty Jul 15, 2014 - 8:36 PM
QUOTE (Bakuu0 @ Jul 16, 2014 - 2:28 AM)
I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.
Posted by: Bakuu0 Jul 16, 2014 - 1:24 AM
thicker drive shafts from sss, cable assy transmission control (from sss or st205), stronger clutch (for e56 or for 3sgte) are necessary for use in mcpherson type.
Posted by: SwissFerdi Jul 16, 2014 - 6:56 AM
QUOTE (Bakuu0 @ Jul 15, 2014 - 12:02 PM)
It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.
I do not know what it means. sorry for my language
A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting.
Posted by: Bakuu0 Jul 16, 2014 - 7:37 AM
QUOTE (SwissFerdi @ Jul 16, 2014 - 6:56 AM)
QUOTE (Bakuu0 @ Jul 15, 2014 - 12:02 PM)
It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.
I do not know what it means. sorry for my language
A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting.
Ok, now I get a point. It was reconnaissance ride one after another before timeattack. Renault was there for joke.
Some interior pics:
https://flic.kr/p/fWvbjg
https://flic.kr/p/fWuVfm
Posted by: sandusky1977 Jul 23, 2014 - 8:52 AM
I want the Celica Club Mats, and Plate Surrounds
Posted by: Bakuu0 Jul 27, 2014 - 4:35 PM
and timeattack: https://www.youtube.com/watch?v=h56lYkmGX4k&list=UUHq8cTeTU1OQXFbYMXmSP-g
more soon
Posted by: jordisonjr Jul 28, 2014 - 8:10 AM
So Clean! I like the Drag wheels much better however
Posted by: Bakuu0 Aug 3, 2014 - 11:31 AM
https://www.youtube.com/watch?v=QIbukdh__DE&feature=youtu.be
Posted by: coutogt4 Aug 3, 2014 - 12:38 PM
Very nice looking car.
Posted by: Bakuu0 Aug 4, 2014 - 2:35 AM
QUOTE (coutogt4 @ Aug 3, 2014 - 12:38 PM)
Very nice looking car.
thanks,
some pics:
Posted by: Bakuu0 Aug 5, 2014 - 2:07 AM
https://www.youtube.com/watch?v=a1-yLzjDRxk&feature=youtu.be
Posted by: SwissFerdi Aug 5, 2014 - 8:17 AM
To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.
Posted by: Bakuu0 Aug 5, 2014 - 4:41 PM
QUOTE (SwissFerdi @ Aug 5, 2014 - 9:17 AM)
To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.
it always looks slower on film
Viev from the wheel https://www.youtube.com/watch?v=UuI-fi_c1YY
Posted by: Bakuu0 Aug 17, 2014 - 3:30 AM
New video:
https://www.youtube.com/watch?v=x3jND7zSLQQ&feature=youtu.be
Posted by: Bakuu0 Nov 1, 2014 - 9:19 AM
work on conservation
Next week track day.
Posted by: Bakuu0 Jan 10, 2015 - 4:59 PM
Winter time, working time.
-fiberglass hood, weight 6kg, fit perfect
-color, aerocatch in progress
-oem hood's lock out
Posted by: BonzaiCelica Jan 10, 2015 - 6:50 PM
How much is weight is the hood saving you?
Posted by: Bakuu0 Jan 11, 2015 - 2:42 AM
QUOTE (BonzaiCelica @ Jan 10, 2015 - 7:50 PM)
How much is weight is the hood saving you?
About 15kg. It's a lot at the front. Next step is to move the battery to the rear.
Posted by: Bakuu0 Jan 11, 2015 - 12:12 PM
Tank mounting changed.
Before:
Now:
B.
Posted by: Bakuu0 Jan 16, 2015 - 12:59 PM
Slowly forward:
-drilled holes for sprinklers and for hood's spoiler
-drilled holes for pins
-made pads for aerocatch
To do:
-aerocatch holes
-sprinklers hoses
-painting or tiling
Posted by: Rusty Jan 16, 2015 - 4:28 PM
Clean mods & great track photos
Anything in the catch can?
Posted by: Bakuu0 Jan 16, 2015 - 4:56 PM
QUOTE (Rusty @ Jan 16, 2015 - 5:28 PM)
Clean mods & great track photos
thanks
QUOTE (Rusty @ Jan 16, 2015 - 5:28 PM)
Anything in the catch can?
Aerocatch mounting is not too complicated. MicroGrinder, drill, tape and no rush.
Posted by: igpx12 Jan 18, 2015 - 9:56 AM
Good install guide for those hood releases
http://youtu.be/rUt2bCxZidk
Posted by: igpx12 Jan 19, 2015 - 8:28 AM
QUOTE (Bakuu0 @ Jan 18, 2015 - 3:55 PM)
I was wondering what this style release would look like on our cars, Gotta say that I like it and might just have to get a set.
Posted by: enderswift Jan 23, 2015 - 9:47 AM
Great car
Posted by: SwissFerdi Jan 23, 2015 - 10:57 AM
Engine looks like business, suspension even better. I love it.
Posted by: Bakuu0 Feb 23, 2015 - 7:45 AM
Hood's fitment corrected:
Posted by: Bakuu0 Mar 15, 2015 - 9:10 AM
Cooling plate taped.
B.
Posted by: Bakuu0 Mar 15, 2015 - 10:31 AM
Posted by: mi645 Mar 16, 2015 - 12:07 AM
a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?
also do u have a picture of ur cv axles? id like to see what kind u r using.
Posted by: Bakuu0 Mar 16, 2015 - 7:24 AM
QUOTE (mi645 @ Mar 16, 2015 - 1:07 AM)
a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?
also do u have a picture of ur cv axles? id like to see what kind u r using.
1st, I live in Poland (Europe), so LHD.
2nd, I've e56 transmission from sss wisco lsd, but suspension is McPherson type. Trans axle from sss. It's not a secret. P&P
3nd, e56 tranny is a little shorter than s54, I've no idea what rpm at 70mph, something around ~3100rpm.
Posted by: Bakuu0 Mar 16, 2015 - 7:42 AM
QUOTE (mi645 @ Mar 16, 2015 - 1:07 AM)
also do u have a picture of ur cv axles? id like to see what kind u r using.
I'll try to explain with my poor english
.
Transaxles from sss are a litlle thicker (wider) in the entrance of e56, but on the outer side are the same (same width).
McPhersone - outside ----o----- entry
sss - outside ----o==== entry
btw. fusion can be also done
EDIT:
pic:
http://s1271.photobucket.com/user/cpietran2/media/IMAG0290.jpg.html
Posted by: cheela Apr 14, 2015 - 9:27 AM
clean install on everything. looks great. and you track your car too. even better.
Posted by: BonzaiCelica Apr 15, 2015 - 11:21 AM
whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?
Posted by: Bakuu0 Apr 16, 2015 - 1:22 PM
QUOTE (BonzaiCelica @ Apr 15, 2015 - 11:21 AM)
whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?
I've no idea. I don't know how much they weigh.
Posted by: TARManiAC Apr 18, 2015 - 4:39 AM
What´s the name of those tires?
Posted by: Bakuu0 Apr 18, 2015 - 7:39 AM
QUOTE (TARManiAC @ Apr 18, 2015 - 5:39 AM)
What´s the name of those tires?
Profil XR01, soft.
Made in Poland.
Posted by: Bakuu0 Apr 23, 2015 - 12:27 PM
Posted by: TARManiAC Apr 27, 2015 - 5:20 PM
Looks good. Are the tires street legal? link to www?
Posted by: TRDweaponX Apr 28, 2015 - 10:27 AM
Nice build.
Posted by: Bakuu0 Jun 29, 2015 - 2:20 PM
something happens:
weight 1180kg
Posted by: HectortheRican Jul 6, 2015 - 2:47 PM
I'm in love with this build. Excellent work! Maybe one day I'll have enough money for street tires and track tires!
I can't wait to read more of your progress!
Posted by: Bakuu0 Jul 7, 2015 - 8:12 AM
https://www.youtube.com/watch?v=M-hcYtAupv4&ab_channel=Bakuu0
Posted by: Bakuu0 Jul 28, 2015 - 1:37 AM
one of fev:
Posted by: Box Jul 28, 2015 - 4:00 PM
You hood is sprinkled with powdered sugar?
Posted by: Bakuu0 Jul 29, 2015 - 7:23 AM
QUOTE (Box @ Jul 28, 2015 - 5:00 PM)
You hood is sprinkled with powdered sugar?
swarovski crystals
Posted by: Box Jul 29, 2015 - 7:27 AM
Alright there Liberachi.
Posted by: Bakuu0 Nov 15, 2015 - 11:48 AM
https://www.youtube.com/watch?v=yRGMYp_-TOo&feature=youtu.be
Posted by: Bakuu0 Nov 17, 2015 - 4:29 PM
Posted by: BonzaiCelica Feb 5, 2016 - 10:34 PM
Nice! Upgrade to twin piston already
Posted by: Bakuu0 Feb 6, 2016 - 3:35 PM
QUOTE (BonzaiCelica @ Feb 5, 2016 - 11:34 PM)
Nice! Upgrade to twin piston already
it's t25 avensis brake and 295mm disk
Posted by: BonzaiCelica Feb 6, 2016 - 3:39 PM
Yea saw that upgrade on newcelica
Posted by: Bakuu0 May 30, 2016 - 7:34 AM
http://www.youtube.com/watch?v=-4JfCOK3J_c
Posted by: BonzaiCelica Mar 15, 2017 - 12:00 AM
??? what did you do?
does that celica with beams go around the track with you???
Posted by: Bakuu0 Mar 16, 2017 - 1:57 PM
QUOTE (BonzaiCelica @ Mar 15, 2017 - 1:00 AM)
??? what did you do?
It's just a rust protection. In Poland we've difficult weather condition for cars (salt in winter, wet condition etc.)
I protected edges with anticorrosive paint.
QUOTE (BonzaiCelica @ Mar 15, 2017 - 1:00 AM)
does that celica with beams go around the track with you???
It's 3sge rev.3, not a beams VVTI.
Posted by: BonzaiCelica Mar 17, 2017 - 1:59 PM
No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....
Posted by: Bakuu0 Mar 18, 2017 - 9:34 AM
QUOTE (BonzaiCelica @ Mar 17, 2017 - 2:59 PM)
No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....
ok, now I understand
Yes, it's ss3.
I don't know what was happening with this car. The car has changed owner.
Posted by: BonzaiCelica Apr 10, 2017 - 12:14 PM
does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.
Posted by: Bakuu0 Apr 10, 2017 - 3:26 PM
QUOTE (BonzaiCelica @ Apr 10, 2017 - 12:14 PM)
does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.
Yes, we cannot passing on turns, only on straight.
Posted by: jordisonjr May 8, 2017 - 8:33 AM
Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.
Posted by: Bakuu0 May 8, 2017 - 2:09 PM
QUOTE (jordisonjr @ May 8, 2017 - 8:33 AM)
Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.
Thanks,
https://www.flickr.com/photos/95634022@N06/albums/72157680836489452
BQ.
Posted by: BonzaiCelica May 9, 2017 - 1:38 AM
for future reference....
http://www.6gc.net/forums/index.php?showtopic=97575
Posted by: Rusty May 27, 2017 - 9:22 PM
Interesting gearbox build, are you still using the E56's viscous LSD?
Posted by: Bakuu0 May 28, 2017 - 2:00 PM
QUOTE (Rusty @ May 27, 2017 - 9:22 PM)
Interesting gearbox build, are you still using the E56's viscous LSD?
Thank.,
My e56 transmission has plate LSD (not a viscous)
Posted by: BonzaiCelica May 28, 2017 - 4:04 PM
so you have a 4.9 final gear ratio now?? cause i know someone who's doing the same thing to his build
Posted by: Rusty May 28, 2017 - 6:58 PM
QUOTE (Bakuu0 @ May 29, 2017 - 7:00 AM)
Thank.,
My e56 transmission has plate LSD (not a viscous)
Ahh so same as my TRD mechanical clutch plate LSD
Posted by: Bakuu0 May 30, 2017 - 7:45 AM
[/url]
Weight reduction bro.
Posted by: Bakuu0 Jun 9, 2017 - 4:51 PM
tag tyres
Posted by: Bakuu0 Jul 5, 2017 - 4:46 PM
yt link:
https://www.youtube.com/watch?v=7l-z-b7WCtQ
BQ,
Posted by: Bakuu0 Oct 27, 2017 - 4:20 PM
https://www.youtube.com/watch?v=R0L4GWPwDTU
BQ.
Posted by: mi645 Nov 20, 2017 - 1:43 PM
What’s ur gear ratios 1-5 and final drive.
I’m
1st 3.838
2nd 1.913
3D 1.333
4th 1.028
5th 0.820
Fd:4.933
Tires 235/40/r17=24.4
Posted by: SwissFerdi Feb 9, 2018 - 10:16 AM
Looks great. I can see how the downforce would be direct given the drivetrain, but are the canards noticeably functional given the rather low bhp?
Posted by: Bakuu0 Feb 15, 2018 - 5:02 PM
new steering wheel:
Posted by: JDUB Feb 19, 2018 - 12:15 PM
inspirational! dont stop !
Posted by: Bakuu0 Feb 28, 2018 - 11:30 AM
Posted by: BonzaiCelica Apr 10, 2018 - 5:11 PM
Wow great. What are your gear ratios?
Posted by: SwissFerdi Apr 12, 2018 - 1:16 PM
What did you do to drop a whole second on the last lap? Well done.
Posted by: Bakuu0 Apr 12, 2018 - 2:13 PM
QUOTE (SwissFerdi @ Apr 12, 2018 - 1:16 PM)
What did you do to drop a whole second on the last lap? Well done.
https://www.youtube.com/watch?v=fxOnShaRd1Y
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)