The GT-Four Brake Upgrade, ST205 Brake Upgrade for 5x100 & 5x114 PCB |
The GT-Four Brake Upgrade, ST205 Brake Upgrade for 5x100 & 5x114 PCB |
Oct 3, 2015 - 5:22 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
not to thread jack, but im so happy someone else is running trd lug nuts!! Price is a bit shocking but the design is awesome! -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Oct 4, 2015 - 1:34 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
something no one has mentioned on this thread is the need for a proportioning valve. the gt4 rears DO lock up before the fronts without the weight of the rear differential.
-------------------- |
Oct 5, 2015 - 1:25 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
Are you referring to swapping it out with an adjustable valve or with the Stock GT4?
This recent article featuring Orido supra (Japanese race car driver who also appears on best motoring Read left paragraph. I guess these brakes were really awesome for their time. When Toyota made quality parts This post has been edited by BonzaiCelica: Oct 5, 2015 - 1:26 PM -------------------- For Sale Items:
|
Oct 5, 2015 - 2:20 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
an aftermarket adjustable proportioning valve would be a wise investment.
-------------------- |
Oct 5, 2015 - 3:40 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
Mr Celica if the month beams extraordinaire said those are real hard to find tune. Or wait never mind the member who had a red Celica with gtfour brakes and rear diffuser with a 3sgte swap.
-------------------- For Sale Items:
|
Oct 5, 2015 - 4:16 PM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
I haven't had my rears lock up before the fronts but it is just over the line where it could. My arrangement may be unique to that though.
If you want a more close to stock bias then yes, you will want a bias controller. But I believe the 300mm front and 315mm rears give a more even bias to the car. I guess you MADE the supra rotors fit berto! This post has been edited by Tigawoods: Oct 5, 2015 - 4:26 PM -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Oct 5, 2015 - 5:13 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
the rear end has kicked out on me on 3 separate occasions.
once during a panic stop because some jackass was doing 10 mph on the highway twice when I hit the brakes on a curved, downhill highway off ramp. In everyday driving its not an issue. But the above situations are not uncommon. They DO happen, and you don't want the rear end kicking out to make things worse. I'm running new Michelin Pilot sport tires, new rear struts, new rear top mounts, new poly bushings, new SS lines, new everything. Also my swaybar is at the softest setting. Therefore I don't think there is anything wrong with my setup. Proportioning valves are cheap, easy to install, and not that hard to setup. Just do a number of hard stops in a big parking lot or wherever until the rears stop locking up first. I'll be ordering mine soon and installing them over the winter. You guys can do what you want, just be careful and be prepared to countersteer -------------------- |
Oct 5, 2015 - 5:26 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
the rear end has kicked out on me on 3 separate occasions. once during a panic stop because some jackass was doing 10 mph on the highway twice when I hit the brakes on a curved, downhill highway off ramp. In everyday driving its not an issue. But the above situations are not uncommon. They DO happen, and you don't want the rear end kicking out to make things worse. I'm running new Michelin Pilot sport tires, new rear struts, new rear top mounts, new poly bushings, new SS lines, new everything. Also my swaybar is at the softest setting. Therefore I don't think there is anything wrong with my setup. Proportioning valves are cheap, easy to install, and not that hard to setup. Just do a number of hard stops in a big parking lot or wherever until the rears stop locking up first. I'll be ordering mine soon and installing them over the winter. You guys can do what you want, just be careful and be prepared to countersteer I think its just the driver... bahah never forget that moment! Or the look on her face! -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Oct 5, 2015 - 5:34 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
the rear end has kicked out on me on 3 separate occasions. once during a panic stop because some jackass was doing 10 mph on the highway twice when I hit the brakes on a curved, downhill highway off ramp. In everyday driving its not an issue. But the above situations are not uncommon. They DO happen, and you don't want the rear end kicking out to make things worse. I'm running new Michelin Pilot sport tires, new rear struts, new rear top mounts, new poly bushings, new SS lines, new everything. Also my swaybar is at the softest setting. Therefore I don't think there is anything wrong with my setup. Proportioning valves are cheap, easy to install, and not that hard to setup. Just do a number of hard stops in a big parking lot or wherever until the rears stop locking up first. I'll be ordering mine soon and installing them over the winter. You guys can do what you want, just be careful and be prepared to countersteer I think its just the driver... bahah never forget that moment! Or the look on her face! And the car was stock when that happened, now factor in a rear caliper that is oversized for the application -------------------- |
Oct 6, 2015 - 7:41 AM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
the rear end has kicked out on me on 3 separate occasions. once during a panic stop because some jackass was doing 10 mph on the highway twice when I hit the brakes on a curved, downhill highway off ramp. In everyday driving its not an issue. But the above situations are not uncommon. They DO happen, and you don't want the rear end kicking out to make things worse. I'm running new Michelin Pilot sport tires, new rear struts, new rear top mounts, new poly bushings, new SS lines, new everything. Also my swaybar is at the softest setting. Therefore I don't think there is anything wrong with my setup. Proportioning valves are cheap, easy to install, and not that hard to setup. Just do a number of hard stops in a big parking lot or wherever until the rears stop locking up first. I'll be ordering mine soon and installing them over the winter. You guys can do what you want, just be careful and be prepared to countersteer Ill throw a section about it in the OP. I can understand that not every setup is the same and just because mine doesn't do it, doesn't mean that everyone else's performs alike. I figure if you are willing to go through the effort of doing this swap, it shouldnt be that much more difficult to plumb in a Bias Controller. -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Oct 11, 2015 - 6:40 AM |
|
Enthusiast Joined Apr 18, '10 From Collado Villalba, Spain Currently Offline Reputation: 0 (0%) |
Hello guys,
Has anyone tried the Toyota Avensis T25 disks for this upgrade? Part numbers: TOYOTA : 4351205050 - 43512-05050 - 4351205070 - 43512-05070 - 4351205110 AP : 24972 ATE : 24012601411 BOSCH: 0204173009 - 0986479423 Brake ENGINEERING: DI956341 BRECO : BS 8591 - BS8591 BREMBO : 09.9817.10 - 09.9817.11 FERODO : DDF1315 METELLI : 230854 sbs : 17510 - 1815204590 - 1815204595 TEXTAR : 92135600 TRW : DF4445S ZIMMERMANN : 590258400 Thank You This post has been edited by cheigs: Oct 11, 2015 - 4:32 PM |
Oct 12, 2015 - 7:16 PM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
^^^ avensis not released in the united states.
so they will be difficult to obtain in the US -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Oct 13, 2015 - 4:45 AM |
|
Enthusiast Joined Apr 18, '10 From Collado Villalba, Spain Currently Offline Reputation: 0 (0%) |
Here, in Spain, is posible to order parts from Toyota cars not released in Europe only with the part number.
In any case, you can obtain by eBay. http://www.ebay.com/itm/360666097518?_trks...K%3AMEBIDX%3AIT http://www.ebay.com/itm/170711453064?_trks...K%3AMEBIDX%3AIT Best regards This post has been edited by cheigs: Oct 13, 2015 - 1:29 PM |
Oct 13, 2015 - 4:10 PM |
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
Here, in Spain, is posible to order parts from Toyota cars not released in Europe only with the part number. In any case, you can obtain by eBay. http://www.ebay.com/itm/360666097518?_trks...K%3AMEBIDX%3AIT http://www.ebay.com/itm/170711453064?_trks...K%3AMEBIDX%3AIT Best regards Yeah, but I don't think anyone in the USA is going to pay $340usd (shipping included) just for basic front rotors off of ebay... |
Oct 14, 2015 - 2:39 AM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
very expensive, but glad you found a similar rotor.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Oct 14, 2015 - 2:07 PM |
|
Enthusiast Joined Jan 2, '15 From Philippines Currently Offline Reputation: 0 (0%) |
Can anyone provide the exact measurements of the "bolt-on" rotor that we should use? I think I may have found a local shop who is associated with distributing Brembo rotors and the rotors are made here in our country. Wondering whether they could create a one off for us.
|
Oct 14, 2015 - 2:16 PM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
Can anyone provide the exact measurements of the "bolt-on" rotor that we should use? I think I may have found a local shop who is associated with distributing Brembo rotors and the rotors are made here in our country. Wondering whether they could create a one off for us. its on the OP but here. like this, but 5x100 if only they could provide a 2-peice -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Oct 28, 2015 - 6:42 PM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Unless my knuckles are fro st. The supra rotors did not fit mine even after grinding 7 mm. Either my knuckles are different of have been modified
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Oct 28, 2015 - 8:44 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
A local member mentioned something to me about supra rotors no working. Just can remember exactly words. Said he's converting to 5x114
This post has been edited by BonzaiCelica: Oct 28, 2015 - 8:52 PM -------------------- For Sale Items:
|
Oct 28, 2015 - 8:53 PM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
Unless my knuckles are fro st. The supra rotors did not fit mine even after grinding 7 mm. Either my knuckles are different of have been modified Hopefully we can resolve this and get everything out on the table. Many measurements will be taken this winter when my car is back on the chopping block Masked man mentioned something to me about supra rotors no working. Just can remember exactly words. Said he's converting to 5x114 him and I were discussing this recently He is having trouble with the 5x114 conversion and this swap as is Fate. Fate should be getting back to trying to figure out a solution. He just got hitched so he is a bit preoccupied MaskedMan said hes working on it slowly. I need to check back with him. -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Lo-Fi Version | Time is now: March 28th, 2024 - 7:18 PM |