Printable Version of Topic

Click here to view this topic in its original format

6G Celicas Forums _ My Project _ ST202+ Bakuu0

Posted by: Bakuu0 Jul 3, 2014 - 1:30 PM

ST202+

Engine: 3S-GE rev. 3 ,
TRD plug wires,
JDM ECU,
Oil Catch Tank D1
polyurethanes mounts
short intake with blitz filter, CAI
EGR out,
cooling plate

transmission:
E56 with exedy clutch

Suspension:
BC Racing coilovers,
polyurethanes,
many custom stuff,
custom front strut bar 3points,
17x8" Allutec, white,
17x7" DragWheels White,
16x7,5 oem st205 for track use,

Exhaust:
2,5", thermal insulation,
car catalyst out,

Other stuff:
JDM front projector headlights + 4300k, rear JDM lights
front ss3 and rear trd splitters,
Earl's brake lines,
underpanel aluminium,
fiberglass hood,
aerocatch

185hp/198nm

Some pictures:







More:
FB: https://www.facebook.com/pages/Life-on-track/536514216374269
YT: https://www.youtube.com/user/Bakuu0
B.

Posted by: Bakuu0 Jul 4, 2014 - 8:17 AM

In the near future we'll have the JapFest in Poland (meeting only for japanes car) and 1 week later our national celica meeting on track. Now I prepare my car for track use, clean and check everything.




B.

Posted by: jordisonjr Jul 4, 2014 - 12:06 PM

Damn nice looking car,
I didn't realize the 3sge made 185 hp!

Posted by: Bakuu0 Jul 4, 2014 - 12:19 PM

QUOTE (jordisonjr @ Jul 4, 2014 - 1:06 PM) *
Damn nice looking car,
I didn't realize the 3sge made 185 hp!

3sge rev.3 after lifting 96> was 170hp, but there I've JDM ECU with 100 octane petrol, stainless exhaust pipe 2,5" with two straight mufflers, EGR out, short intake with CAI. That's all.

Posted by: KAOS Jul 14, 2014 - 11:59 AM

QUOTE (jordisonjr @ Jul 4, 2014 - 11:06 AM) *
Damn nice looking car,
I didn't realize the 3sge made 185 hp!


That's why I swapped out the 5SFE for the 3SGE - tongue.gif



Posted by: BonzaiCelica Jul 14, 2014 - 10:20 PM

you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!

Posted by: Rusty Jul 15, 2014 - 4:17 AM

It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models

Posted by: Bakuu0 Jul 15, 2014 - 9:28 AM

QUOTE (BonzaiCelica @ Jul 14, 2014 - 11:20 PM) *
you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!

QUOTE (Rusty @ Jul 15, 2014 - 5:17 AM) *
It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models


I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.

Posted by: SwissFerdi Jul 15, 2014 - 10:47 AM

Excellent racecar build. Is that an Espace on track?

Posted by: Bakuu0 Jul 15, 2014 - 11:02 AM

QUOTE (SwissFerdi @ Jul 15, 2014 - 11:47 AM) *
Excellent racecar build.

It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

QUOTE (SwissFerdi @ Jul 15, 2014 - 11:47 AM) *
Is that an Espace on track?

I do not know what it means. sorry for my language smile.gif

Posted by: Mattattack Jul 15, 2014 - 11:42 AM

Paint and wheels are gorgeous, sheesh

Posted by: BonzaiCelica Jul 15, 2014 - 7:19 PM

ha hmm we learn something rusty.

Posted by: Rusty Jul 15, 2014 - 8:36 PM

QUOTE (Bakuu0 @ Jul 16, 2014 - 2:28 AM) *
I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.

thumbsup.gif

Posted by: Bakuu0 Jul 16, 2014 - 1:24 AM

thicker drive shafts from sss, cable assy transmission control (from sss or st205), stronger clutch (for e56 or for 3sgte) are necessary for use in mcpherson type.

Posted by: SwissFerdi Jul 16, 2014 - 6:56 AM

QUOTE (Bakuu0 @ Jul 15, 2014 - 12:02 PM) *
It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

I do not know what it means. sorry for my language smile.gif


A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting. smile.gif


Posted by: Bakuu0 Jul 16, 2014 - 7:37 AM

QUOTE (SwissFerdi @ Jul 16, 2014 - 6:56 AM) *
QUOTE (Bakuu0 @ Jul 15, 2014 - 12:02 PM) *
It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

I do not know what it means. sorry for my language smile.gif


A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting. smile.gif




Ok, now I get a point. It was reconnaissance ride one after another before timeattack. Renault was there for joke.




Some interior pics:
https://flic.kr/p/fWvbjg
https://flic.kr/p/fWuVfm

Posted by: Bakuu0 Jul 23, 2014 - 7:04 AM




Posted by: sandusky1977 Jul 23, 2014 - 8:52 AM

I want the Celica Club Mats, and Plate Surrounds

Posted by: Bakuu0 Jul 27, 2014 - 4:35 PM




and timeattack: https://www.youtube.com/watch?v=h56lYkmGX4k&list=UUHq8cTeTU1OQXFbYMXmSP-g

more soon

Posted by: Bakuu0 Jul 28, 2014 - 7:36 AM





Posted by: jordisonjr Jul 28, 2014 - 8:10 AM

So Clean! I like the Drag wheels much better however

Posted by: Bakuu0 Aug 3, 2014 - 11:31 AM

https://www.youtube.com/watch?v=QIbukdh__DE&feature=youtu.be

Posted by: coutogt4 Aug 3, 2014 - 12:38 PM

Very nice looking car.

Posted by: Bakuu0 Aug 4, 2014 - 2:35 AM

QUOTE (coutogt4 @ Aug 3, 2014 - 12:38 PM) *
Very nice looking car.

thanks,


some pics:




Posted by: Bakuu0 Aug 4, 2014 - 1:41 PM




Posted by: Bakuu0 Aug 5, 2014 - 2:07 AM

https://www.youtube.com/watch?v=a1-yLzjDRxk&feature=youtu.be

Posted by: SwissFerdi Aug 5, 2014 - 8:17 AM

To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.

Posted by: Bakuu0 Aug 5, 2014 - 4:41 PM

QUOTE (SwissFerdi @ Aug 5, 2014 - 9:17 AM) *
To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.

it always looks slower on film wink.gif

Viev from the wheel https://www.youtube.com/watch?v=UuI-fi_c1YY

Posted by: Bakuu0 Aug 17, 2014 - 3:30 AM

New video:
https://www.youtube.com/watch?v=x3jND7zSLQQ&feature=youtu.be

Posted by: Bakuu0 Nov 1, 2014 - 9:19 AM

work on conservation


Next week track day.

Posted by: Bakuu0 Nov 12, 2014 - 2:34 PM

Wet trackday, some pics:





Posted by: Bakuu0 Jan 10, 2015 - 4:59 PM

Winter time, working time.
-fiberglass hood, weight 6kg, fit perfect
-color, aerocatch in progress
-oem hood's lock out

Posted by: BonzaiCelica Jan 10, 2015 - 6:50 PM

How much is weight is the hood saving you?

Posted by: Bakuu0 Jan 11, 2015 - 2:42 AM

QUOTE (BonzaiCelica @ Jan 10, 2015 - 7:50 PM) *
How much is weight is the hood saving you?

About 15kg. It's a lot at the front. Next step is to move the battery to the rear.

Posted by: Bakuu0 Jan 11, 2015 - 12:12 PM

Tank mounting changed.
Before:

Now:

B.

Posted by: Bakuu0 Jan 16, 2015 - 12:59 PM

Slowly forward:
-drilled holes for sprinklers and for hood's spoiler
-drilled holes for pins
-made pads for aerocatch

To do:
-aerocatch holes
-sprinklers hoses
-painting or tiling



Posted by: Rusty Jan 16, 2015 - 4:28 PM

Clean mods & great track photos thumbsup.gif

Anything in the catch can?

Posted by: Bakuu0 Jan 16, 2015 - 4:56 PM

QUOTE (Rusty @ Jan 16, 2015 - 5:28 PM) *
Clean mods & great track photos thumbsup.gif

thanks

QUOTE (Rusty @ Jan 16, 2015 - 5:28 PM) *
Anything in the catch can?

Aerocatch mounting is not too complicated. MicroGrinder, drill, tape and no rush.

Posted by: igpx12 Jan 18, 2015 - 9:56 AM

Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

Posted by: Bakuu0 Jan 18, 2015 - 2:55 PM

QUOTE (igpx12 @ Jan 18, 2015 - 10:56 AM) *
Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

thanks, but I did it myself biggrin.gif






B.

Posted by: igpx12 Jan 19, 2015 - 8:28 AM

QUOTE (Bakuu0 @ Jan 18, 2015 - 3:55 PM) *
QUOTE (igpx12 @ Jan 18, 2015 - 10:56 AM) *
Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

thanks, but I did it myself biggrin.gif






B.


I was wondering what this style release would look like on our cars, Gotta say that I like it and might just have to get a set.

Posted by: Bakuu0 Jan 23, 2015 - 6:49 AM

a few steps forward

Underside painted:


Cooling plate converted for pins:


Now just taping the top of hood and mount.


Posted by: enderswift Jan 23, 2015 - 9:47 AM

Great car

Posted by: SwissFerdi Jan 23, 2015 - 10:57 AM

Engine looks like business, suspension even better. I love it.

Posted by: Bakuu0 Jan 26, 2015 - 6:26 AM




and a lot of this


Posted by: Bakuu0 Jan 27, 2015 - 6:02 AM




pins with custom coolingplate

Posted by: Bakuu0 Feb 23, 2015 - 7:45 AM

Hood's fitment corrected:


Posted by: Bakuu0 Mar 15, 2015 - 9:10 AM

Cooling plate taped.

B.

Posted by: Bakuu0 Mar 15, 2015 - 10:31 AM


Posted by: mi645 Mar 16, 2015 - 12:07 AM

a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?

also do u have a picture of ur cv axles? id like to see what kind u r using.

Posted by: Bakuu0 Mar 16, 2015 - 7:24 AM

QUOTE (mi645 @ Mar 16, 2015 - 1:07 AM) *
a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?

also do u have a picture of ur cv axles? id like to see what kind u r using.


1st, I live in Poland (Europe), so LHD.
2nd, I've e56 transmission from sss wisco lsd, but suspension is McPherson type. Trans axle from sss. It's not a secret. P&P
3nd, e56 tranny is a little shorter than s54, I've no idea what rpm at 70mph, something around ~3100rpm.

Posted by: Bakuu0 Mar 16, 2015 - 7:42 AM

QUOTE (mi645 @ Mar 16, 2015 - 1:07 AM) *
also do u have a picture of ur cv axles? id like to see what kind u r using.


I'll try to explain with my poor english smile.gif.

Transaxles from sss are a litlle thicker (wider) in the entrance of e56, but on the outer side are the same (same width).
McPhersone - outside ----o----- entry
sss - outside ----o==== entry

btw. fusion can be also done

EDIT:
pic:
http://s1271.photobucket.com/user/cpietran2/media/IMAG0290.jpg.html

Posted by: Bakuu0 Apr 14, 2015 - 6:52 AM


new color for track wheels:

and tiries:

Posted by: cheela Apr 14, 2015 - 9:27 AM

clean install on everything. looks great. and you track your car too. even better. smile.gif

Posted by: BonzaiCelica Apr 15, 2015 - 11:21 AM

whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?

Posted by: Bakuu0 Apr 16, 2015 - 1:22 PM

QUOTE (BonzaiCelica @ Apr 15, 2015 - 11:21 AM) *
whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?


I've no idea. I don't know how much they weigh.


Posted by: TARManiAC Apr 18, 2015 - 4:39 AM

What´s the name of those tires?

Posted by: Bakuu0 Apr 18, 2015 - 7:39 AM

QUOTE (TARManiAC @ Apr 18, 2015 - 5:39 AM) *
What´s the name of those tires?


Profil XR01, soft.
Made in Poland.

Posted by: Bakuu0 Apr 23, 2015 - 12:27 PM


Posted by: TARManiAC Apr 27, 2015 - 5:20 PM

Looks good. Are the tires street legal? link to www?

Posted by: TRDweaponX Apr 28, 2015 - 10:27 AM

Nice build.

Posted by: Bakuu0 Jun 29, 2015 - 2:20 PM

something happens:

weight 1180kg


Posted by: Bakuu0 Jul 5, 2015 - 1:07 PM





Posted by: HectortheRican Jul 6, 2015 - 2:47 PM

I'm in love with this build. Excellent work! Maybe one day I'll have enough money for street tires and track tires!
I can't wait to read more of your progress!

Posted by: Bakuu0 Jul 7, 2015 - 8:12 AM

https://www.youtube.com/watch?v=M-hcYtAupv4&ab_channel=Bakuu0

Posted by: Bakuu0 Jul 27, 2015 - 11:19 AM

Yokohama JAPFEST 2015
TimeAttack:



and:
https://www.youtube.com/watch?v=sv-Ch5bz1Qk&ab_channel=Bakuu0

Posted by: Bakuu0 Jul 28, 2015 - 1:37 AM

one of fev:

Posted by: Box Jul 28, 2015 - 4:00 PM

You hood is sprinkled with powdered sugar? tongue.gif

Posted by: Bakuu0 Jul 29, 2015 - 7:23 AM

QUOTE (Box @ Jul 28, 2015 - 5:00 PM) *
You hood is sprinkled with powdered sugar? tongue.gif

swarovski crystals laugh.gif

Posted by: Box Jul 29, 2015 - 7:27 AM

Alright there Liberachi. tongue.gif

Posted by: Bakuu0 Aug 21, 2015 - 1:25 PM

https://p0lish.wordpress.com/2015/08/19/dzap-fest-2015-tam-trzeba-bylo-byc/






Bq.

Posted by: Bakuu0 Nov 15, 2015 - 11:48 AM

https://www.youtube.com/watch?v=yRGMYp_-TOo&feature=youtu.be

Posted by: Bakuu0 Nov 17, 2015 - 4:29 PM




Posted by: Bakuu0 Feb 5, 2016 - 5:57 PM

upgrade:











Posted by: BonzaiCelica Feb 5, 2016 - 10:34 PM

Nice! Upgrade to twin piston already

Posted by: Bakuu0 Feb 6, 2016 - 3:35 PM

QUOTE (BonzaiCelica @ Feb 5, 2016 - 11:34 PM) *
Nice! Upgrade to twin piston already

it's t25 avensis brake and 295mm disk

Posted by: BonzaiCelica Feb 6, 2016 - 3:39 PM

Yea saw that upgrade on newcelica

Posted by: Bakuu0 May 30, 2016 - 7:34 AM




http://www.youtube.com/watch?v=-4JfCOK3J_c

Posted by: Bakuu0 Mar 9, 2017 - 1:32 PM

up:


oem ss3 mounted



rear wiper remowed for weight
BQ.

Posted by: Bakuu0 Mar 12, 2017 - 12:07 PM

Little protection:





BQ.

Posted by: BonzaiCelica Mar 15, 2017 - 12:00 AM

??? what did you do?

does that celica with beams go around the track with you???

Posted by: Bakuu0 Mar 16, 2017 - 1:57 PM

QUOTE (BonzaiCelica @ Mar 15, 2017 - 1:00 AM) *
??? what did you do?

It's just a rust protection. In Poland we've difficult weather condition for cars (salt in winter, wet condition etc.)
I protected edges with anticorrosive paint.


QUOTE (BonzaiCelica @ Mar 15, 2017 - 1:00 AM) *
does that celica with beams go around the track with you???

It's 3sge rev.3, not a beams VVTI.

Posted by: BonzaiCelica Mar 17, 2017 - 1:59 PM

No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....

Posted by: Bakuu0 Mar 18, 2017 - 9:34 AM

QUOTE (BonzaiCelica @ Mar 17, 2017 - 2:59 PM) *
No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....


ok, now I understand smile.gif
Yes, it's ss3.
I don't know what was happening with this car. The car has changed owner.

Posted by: Bakuu0 Apr 4, 2017 - 6:55 AM







http://www.youtube.com/watch?v=8nNVQGuXyDs







Next week first trackday in 2017.
BQ.

Posted by: Bakuu0 Apr 10, 2017 - 8:36 AM







Onboard:
https://www.youtube.com/watch?v=7U8L244Y3Us&feature=youtu.be

BQ

Posted by: BonzaiCelica Apr 10, 2017 - 12:14 PM

does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.

Posted by: Bakuu0 Apr 10, 2017 - 3:26 PM

QUOTE (BonzaiCelica @ Apr 10, 2017 - 12:14 PM) *
does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.

Yes, we cannot passing on turns, only on straight.



Posted by: Bakuu0 May 8, 2017 - 7:24 AM




First aeromod for track use.
BQ.

Posted by: jordisonjr May 8, 2017 - 8:33 AM

Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.

Posted by: Bakuu0 May 8, 2017 - 2:09 PM

QUOTE (jordisonjr @ May 8, 2017 - 8:33 AM) *
Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.

Thanks,
https://www.flickr.com/photos/95634022@N06/albums/72157680836489452
BQ.

Posted by: BonzaiCelica May 9, 2017 - 1:38 AM

for future reference....

http://www.6gc.net/forums/index.php?showtopic=97575

Posted by: Bakuu0 May 26, 2017 - 7:36 AM







Gearbox fusion: e56 (plates lsd) with FD and gears from rav4 (2008r). The gearbox is much shorter.

BQ.

Posted by: Rusty May 27, 2017 - 9:22 PM

Interesting gearbox build, are you still using the E56's viscous LSD?

Posted by: Bakuu0 May 28, 2017 - 2:00 PM

QUOTE (Rusty @ May 27, 2017 - 9:22 PM) *
Interesting gearbox build, are you still using the E56's viscous LSD?

Thank.,
My e56 transmission has plate LSD (not a viscous)

Posted by: BonzaiCelica May 28, 2017 - 4:04 PM

so you have a 4.9 final gear ratio now?? cause i know someone who's doing the same thing to his build

Posted by: Rusty May 28, 2017 - 6:58 PM

QUOTE (Bakuu0 @ May 29, 2017 - 7:00 AM) *
Thank.,
My e56 transmission has plate LSD (not a viscous)



Ahh so same as my TRD mechanical clutch plate LSD

Posted by: Bakuu0 May 30, 2017 - 7:45 AM


[/url]
Weight reduction bro.

Posted by: Bakuu0 Jun 9, 2017 - 4:51 PM


tag tyres

Posted by: Bakuu0 Jul 2, 2017 - 6:15 AM

DIY front splitter with addjustable angle:




https://flic.kr/s/aHsm3Jxyyn

BQ.

Posted by: Bakuu0 Jul 5, 2017 - 4:46 PM

yt link:
https://www.youtube.com/watch?v=7l-z-b7WCtQ


BQ,

Posted by: Bakuu0 Aug 5, 2017 - 5:43 AM

JAPFEST 2017 in Poland:





BQ.

Posted by: Bakuu0 Oct 27, 2017 - 4:20 PM



https://www.youtube.com/watch?v=R0L4GWPwDTU

BQ.

Posted by: mi645 Nov 20, 2017 - 1:43 PM

What’s ur gear ratios 1-5 and final drive.
I’m
1st 3.838
2nd 1.913
3D 1.333
4th 1.028
5th 0.820
Fd:4.933
Tires 235/40/r17=24.4

Posted by: Bakuu0 Feb 9, 2018 - 9:32 AM




Posted by: SwissFerdi Feb 9, 2018 - 10:16 AM

Looks great. I can see how the downforce would be direct given the drivetrain, but are the canards noticeably functional given the rather low bhp?

Posted by: Bakuu0 Feb 11, 2018 - 11:25 AM

QUOTE (SwissFerdi @ Feb 9, 2018 - 11:16 AM) *
Looks great. I can see how the downforce would be direct given the drivetrain, but are the canards noticeably functional given the rather low bhp?


Thanks. I've been driving celica with canards for over the year on many trackdays. Now the difference is that side aero panels.









Posted by: Bakuu0 Feb 15, 2018 - 5:02 PM

new steering wheel:

Posted by: JDUB Feb 19, 2018 - 12:15 PM

inspirational! dont stop !

Posted by: Bakuu0 Feb 28, 2018 - 11:30 AM


Posted by: Bakuu0 Apr 10, 2018 - 2:46 PM



OS1 2:02,8
OS2 2:05 FAIL ( http://www.youtube.com/watch?v=XBwlS_-Jx34 )
OS3 2:03,6
OS4 2:01,9
OS5 2:00,8
OS6 1:59,8 ( http://www.youtube.com/watch?v=5IW2C7cAXps )



6 place in class 2000 performance.
1 place in Toyota Cup.




Posted by: BonzaiCelica Apr 10, 2018 - 5:11 PM

Wow great. What are your gear ratios?

Posted by: SwissFerdi Apr 12, 2018 - 1:16 PM

What did you do to drop a whole second on the last lap? Well done.

Posted by: Bakuu0 Apr 12, 2018 - 2:13 PM

QUOTE (SwissFerdi @ Apr 12, 2018 - 1:16 PM) *
What did you do to drop a whole second on the last lap? Well done.



https://www.youtube.com/watch?v=fxOnShaRd1Y

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)