Printable Version of Topic
Click here to view this topic in its original format
6G Celicas Forums _ My Project _ GT-Four Full Conversion
Posted by: jcagle Jun 2, 2016 - 6:11 PM
After 7 years as a 3S-GTE swap, the FWD transmission on my GT crapped out about a year ago. Having started the project late in college, and now being a more seasoned MechE the AWD conversion seemed a little less daunting that it was many years ago. Probably 2 months from being road worthy, but only a little bit of fabrication remains for sway bar brackets and an exhaust.
Saving the more interesting chassis photos for when the work is complete, but here are some scoping shots. The goal is to have a nearly stock looking car with a few subtle perks, including
- TRD full adjustable suspension
- C-One strut tower and anti-roll bars (front and rear)
- Hybrid (ball bearing) CT20B turbo by Fensport, uprated to 1.2 bar (~320 bhp)
- Hand painted brake calipers
- So many new screws, nuts, and hoses that I've completely lost count. Specialized fasteners were replaced with Toyota OEM, while generic fasteners were replaced with class 10.9 steel (McMaster)
Posted by: 4-eyed-freek Jun 2, 2016 - 7:03 PM
Oh my... its beautiful! Awesome work!!!
Posted by: Malek Jun 2, 2016 - 8:28 PM
Fellow Mech E!!
I'm looking forward to see how you did your mounts! Looks to be even more tucked up than mine..which is impressive 
Posted by: Zeros2 Jun 2, 2016 - 10:19 PM
Very nice car, I love the caliper!!
Posted by: Nial Jun 3, 2016 - 1:01 AM
Nice work.
You are missing the big washer that goes on the bolt that holds the sub frame to the chassis.
Posted by: a70boostfiend Aug 21, 2018 - 1:42 PM
Saving the more interesting chassis photos for when the work is complete, but here are some scoping shots. The goal is to have a nearly stock looking car with a few subtle perks, including
- TRD full adjustable suspension
- C-One strut tower and anti-roll bars (front and rear)
- Hybrid (ball bearing) CT20B turbo by Fensport, uprated to 1.2 bar (~320 bhp)
- Hand painted brake calipers
- So many new screws, nuts, and hoses that I've completely lost count. Specialized fasteners were replaced with Toyota OEM, while generic fasteners were replaced with class 10.9 steel (McMaster)
Any update on this? the images are broken unfortunately.
Posted by: BonzaiCelica Aug 24, 2018 - 11:50 AM
right you bumped a build over 2 years old...
Posted by: NgoFcukinWay Aug 24, 2018 - 2:17 PM
at least he used the search function.... or at least had a lot of time on his hands to dig this up...
Posted by: SleeperCelica3 Mar 21, 2019 - 10:03 PM
Hey could mabie give me some advice on what i need for my stock 5sfe transmission to work in my 3sgte swap?
Posted by: bloodMoney Mar 22, 2019 - 11:10 AM
It's been documented here... It might even be in the stickies....
You'll need a 3s flywheel and pressure plate, with a 5s clutch disk. IIRC, If you call southbend clutch, they know the combo and a bunch of users have had good experience with them.
Posted by: NgoFcukinWay Mar 27, 2019 - 9:13 AM
transmission bolts right up. PrimeDriven sells the Southbend Hybrid clutch kit you'll need.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)