6G Celicas Forums

Welcome Guest ( Log In | Register )

9 Pages V  « < 5 6 7 8 9 >  
Reply to this topicStart new topic
> 7A-FTE made in Germany
post Oct 17, 2013 - 2:47 AM
+Quote Post
malpaso



Enthusiast
*****
Joined Feb 3, '06
From Czech Republic (Europe)
Currently Offline

Reputation: 56 (100%)




QUOTE (enderswift @ Oct 17, 2013 - 4:15 AM) *
Best looking 7a I have ever seen

sad to say (I had one my self)... but agree smile.gif. GREAT job!


--------------------
No more replicas... This is evolution... This is SS-four :)

________[Featured Celica of 6gc.net @ 2010]_________
post Jan 13, 2014 - 5:52 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Small update... i bought a simple compression tester and this is the result: cylinder 1-4 : 190 | 188 | 187 | 186 psi ... I'm pretty happy with those numbers.

Then i build a scale to measure the corner weights of the car that is able to weigh up to 500kg (~1100lbs) since i wasn't able to find one thats affordable.
Surely not as precise as a professional corner weight scale but enough to get an idea of the cars weight distribution smile.gif









The only problem is that i only have one scale.... so i have to get all the other wheels on the same height and it takes some time to measure every corner... but im not doing this every month so it's ok wink.gif

Weights without driver and full tank of E85:

FL 745 lbs | FR 815 lbs / 63%

RL 485 lbs | RR 428 lbs / 37%

Total 2473 lbs

Weights with driver:

FL 813 lbs | FR 835 lbs

RL 555 lbs | RR 432 lbs

Total 2635 lbs
post Jan 15, 2014 - 2:05 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Just finished another little winter project wink.gif started out with a ST202 rev counter i installed that was a little inaccurate.. searched a way to calibrate it and found out that you can alter the movement of the needle quite a bit. Enough to let it travel twice as much with the same rpms, or the opposite way with the speed indicator.

Doesn't look perfect but it works.. smile.gif



And a short video where i was testing the modified hardware with the old dials.

http://www.youtube.com/watch?v=LIYlkdgLK0Q
post Jan 15, 2014 - 4:40 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




ha friggin awesome stuff didnt know you were on ethonal


--------------------
For Sale Items:
post Jan 21, 2014 - 3:30 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




E85 is awesome, i will try to get some E100 for this season... no more crappy fuel that contaminates the good alcohol wink.gif .... just a little difficult to get..
And since my 650cc SARD injectors are getting a little bit to small for this stuff i will replace them with some far more modern Bosch EV14 980cc injectors.
post Feb 10, 2014 - 5:03 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




New fuel rail and injectors are ready, i just need some fittings and stuff to build a new fuel line from the stock filter to the rail.





post Feb 16, 2014 - 2:56 PM
+Quote Post
Poonicus



Enthusiast
**
Joined Apr 24, '13
From Tomball, TX
Currently Offline

Reputation: 3 (100%)




Tut die 7afte haben die Zündspule im Verteiler wie der 5sfe?

Es tut uns leid mein Deutsch ist einen kleinen rostig haha, mag meinen auto. XD


--------------------
"As a professor of science, I assure you we did, in fact, evolve from filthy monkey-men." -Prof. Farnsworth
post Feb 16, 2014 - 5:19 PM
+Quote Post
enderswift



Enthusiast
*****
Joined Jul 12, '08
Currently Offline

Reputation: 5 (100%)




that is the sexiest 7a manifold I have ever seen O.O


--------------------
post Feb 17, 2014 - 2:55 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




Great looking manifold, and I don't know how I missed it (and nobody else commented), but a center-mounted tacho! (!!!!!) That's fantastic! I love that look. Why the optimistic redline though?

This post has been edited by SwissFerdi: Feb 17, 2014 - 2:57 PM


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Feb 17, 2014 - 4:49 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




QUOTE (Poonicus @ Feb 16, 2014 - 8:56 PM) *
Tut die 7afte haben die Zündspule im Verteiler wie der 5sfe?

Es tut uns leid mein Deutsch ist einen kleinen rostig haha, mag meinen auto. XD

Haha not bad smile.gif .. and yes the stock 7a got the coil in the distributor, but not my 7a wink.gif

@ SwissFerdi

And i thought i'm the only one who likes that idea wink.gif .. i plan to install 266°/256° cams (the only option i got in germany) in the future, therefore the high redline. With stock cams theres no reason to rev that high, thats right.
A video of the tacho with the new dials, it's a bit more laggy than the stock tach due to the stronger spring on the speedo needle, but nothing too bad: Youtube

The new manifold is on the engine, build a AN6 fuel line to the stock filter, no leaks this time... and the engine is running really well with the new injectors. They're pretty loud but thats no problem, idle is a bit smoother and the throttle response seems to be a bit better.

post Apr 15, 2014 - 2:05 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Back on the streets smile.gif ... 7A-FTE - Garrett T28 @ 1.1bar

Still have to do lots of tuning with the new injectors and my ST205 fuelpump seems to be maxed out... but i have a Aeromotive 340 ready to go in.
But for now i`m really happy how the engine performs.



post Apr 15, 2014 - 4:09 PM
+Quote Post
STlad

Enthusiast

Joined Oct 3, '07
From Ireland
Currently Offline

Reputation: 0 (0%)




Pulling very nice there wink.gif Lot of respect for this Celica with all the work you've done on it wink.gif
post Apr 15, 2014 - 8:00 PM
+Quote Post
kormysh8



Enthusiast
*
Joined Nov 14, '09
From Saskatoon
Currently Offline

Reputation: 0 (0%)




WOW. Good work! Love every bit of this ST! 7ATFE powa!! Ever thought about shaving down some of the fins inside of the intake mani?
post Apr 22, 2014 - 2:13 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Thanks for your comments smile.gif

@ kormysh8: not really, i don't think this would gain any power at all, the best solution would be a completely new intake manifold, but for now the stock on seems to be sufficient.

I finally went to the track yesterday, i was somewhat nervous and planned only to do some slow laps.... well... that was the plan ....

'94 Celica ST Turbo - Eurospeedway 21.04.14 .... starting behind the ST205 was a bad idea... i just had to go WOT...

The suspension seriously needs a new setup... the car corners like a rwd without the corner exit grip .... very loose rear end, but lots of fun wink.gif ..
But even with the crappy traction i managed a top speed of 132mph on this track, faster than i thought.
post Apr 30, 2014 - 2:48 PM
+Quote Post
Syaoran



Enthusiast
*****
Joined Jan 4, '12
From US
Currently Offline

Reputation: 6 (100%)




That was pretty good. A lot of tire squealing lol.

What's the Porsche brakes from?


--------------------
1993 Celica GT Coupe - sold
1994 Celica GT Liftback
post Apr 30, 2014 - 3:21 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




QUOTE (Syaoran @ Apr 30, 2014 - 9:48 PM) *
That was pretty good. A lot of tire squealing lol.

What's the Porsche brakes from?

Thanks! smile.gif ... i definitely need a LSD....
The calipers are from a preface 996 Turbo/GT3, the caliper brackets are custom made and the discs are stock ST205.
post May 1, 2014 - 7:45 AM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




QUOTE (Hafkai @ Apr 22, 2014 - 3:13 PM) *
The suspension seriously needs a new setup... the car corners like a rwd without the corner exit grip .... very loose rear end, but lots of fun wink.gif ..


Mine does the same, I don't think it's necessarily your suspension setup. When the rear of this car is stiffened it just likes to swing a bit, especially in a steady-state corner under trail-braking. I love it.

You were quick mate, very well done. Passed a lot of cars that technically should have been passing you.

Edit - LOL @ at the E30 around 7:30, he was trying so hard!

This post has been edited by SwissFerdi: May 1, 2014 - 7:47 AM


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Jun 10, 2014 - 2:54 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Well...... crap .....



Always remember to use loctite on flywheel bolts.... btw.. does someone know if there are suitable ARP bolts for the 7A?

I'm not sure if they really got loose and the whole thing rattled itself to death or if the bolts simlpy failed.. but the marks from the bolt heads in the flywheel look like the thing was loose for some time...
post Jun 10, 2014 - 3:01 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




redface.gif

Scary! Any clutch damage?

This post has been edited by SwissFerdi: Jun 10, 2014 - 3:02 PM


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post Jun 10, 2014 - 3:37 PM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Nothing bad, just some scratches.



The worst part is the crankshaft....



I hope the mating surface can be fixed but it sucks to take half the engine apart.... it was running so good and everything was fine, goddamit mad.gif mad.gif

9 Pages V  « < 5 6 7 8 9 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 5:49 PM