Printable Version of Topic

Posted by: jaxx6GC Jan 7, 2019 - 10:12 PM

I figured I'd make a thread on how my 6GCs coming along. I have a 1997 Celica GT that started out as a rental car in Michigan. The original owner purchased it with around 30,000 Miles and brought it down to Louisiana. He put about 140k miles on it and blew up the engine. My buddy picked it up in 2013 and had a used 5S put it and also got it resprayed. Heres a picture right after he got it painted.

http://s1042.photobucket.com/user/Thatjankyst204/media/10288766_10203090461016151_47687543187463422_n_zpsvpkzgifp.jpg.html

Sadly the shop broke the badges it came with. If you've got a set of gold badges hit me up. After that, he drove it for another 60k miles. In mid 2016 he bought a miatia as a project car and got a fiesta ST. He didn't want to see it go to some random person and I needed a reliable daily so I picked it up. It was in pretty great condition. The only mods it had was a weapon R intake, tint and painted wheels. It also came with the original paperwork, manual, dealer brochures, business cards and window sticker. Here's the car the car right after I got it.

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-07_19-43-58_zpsyyrh081s.jpg.html

http://s1042.photobucket.com/user/Thatjankyst204/media/20161007_180350_zpsehzvjfh1.jpg.html


http://s1042.photobucket.com/user/Thatjankyst204/media/20161008_024400_zps9dz7zl89.jpg.html

The first thing I did was replace the stereo, oil pressure gauge and give it a deep cleaning. I also tossed a 7G short throw shifter in. I drove it for a couple of years and modded it as I went along. The car had some issues and sat for a couple of months but I worked everything out and got it back on the road in late 2017. In August of 2018 I got backed into by an old lady in an F-150. She broke both passenger side headlights, dented my hood and cracked my bumper. I used the settlement to pick up a 95' ST from a member. It came with a ton of goodies including a full SS-III interior, hypersport floormats, SS-III tail lights, GT4 rear brace, TRD front brace, HIC Visor and toyota sunroof Visor. I swapped over the interior along with the door pannels, some other interior bits, a fender and headlights. I also tossed an old school badge on it.

https://s1042.photobucket.com/user/Thatjankyst204/media/photo_2018-09-28_21-57-58_zpszqshyau7.jpg.html

I then got backed into again in October 2018. My hood was dented in more along with one of my highbeams and my bumper. I decided to sell the ST to a buddy who needed a reliable daily and used that money along with the second settlement to order some BC Racing coilovers and spacers.

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-07_20-39-43_zpscbqs5wvk.jpg.html

I replaced the steering wheel with a 3 post from a Rav 4 and here's how it sits today.

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-07_20-39-10_zpsbknxa5st.jpg.html

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2018-12-10_00-17-39_zpszhhvbidn.jpg.html

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-07_18-50-09_zps2xphxtdz.jpg.html

It's come a long way since I picked it up. I've put 50k miles on it and enjoyed every single one! I didn't expect to ever do anything to my Celica but I kinda fell in love with it. I picked up some 5Zigen Pro Racer GN+ for a couple hundred dollars since. I'll update the thread once I get them on.

Posted by: SwissFerdi Jan 8, 2019 - 11:26 AM

Cool beans, love the tiger seats.

Posted by: TimeslideZ Jan 8, 2019 - 8:25 PM

Nice bro!!! Now you gotta get some wheels. Got any specifics on your mind?

Posted by: jaxx6GC Jan 9, 2019 - 1:09 AM

I've got a set of bronze 5zigen Pro Racer GN+ that're 17x8.5 +48. I'm gonna get them on in a couple of days after I clean them up. I'm hoping they'll sit right with my 20mm spacers.

Posted by: cheela Jan 9, 2019 - 9:59 AM

glad to see you made it on here.
Celi looks great!

you might have to roll your fenders with the wheel setup you're going with. I have 7th gen wheels with 20mm spacers and they sit just about flush without having to roll my fenders.

Posted by: Yupe7 Jan 9, 2019 - 3:48 PM

Nice i love the seats are they the same side as the older one you had are they bigger

Posted by: jaxx6GC Jan 9, 2019 - 6:01 PM

I actually followed your setup when I got my spacers. I figure I'll have to roll them but hopefully they'll fit until I can rent a roller. I'm gonna lift the car a couple of inches.

Posted by: jaxx6GC Jan 9, 2019 - 6:28 PM

I picked up a set of 5zigen Pro Racer GN+ wheels for a pretty good deal. One of them has a mild bend in the lip but they held air just fine so I'm not terribly worried. I polished up the lips, tossed in some new valve stems and now I've just got to get them mounted up. Here's some before and after shots.

https://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-09_16-55-58_zps0m4xocfl.jpg.html

Before:
https://s1042.photobucket.com/user/Thatjankyst204/media/Before_zpsmr1dh5oi.jpg.html

After:
http://s1042.photobucket.com/user/Thatjankyst204/media/After_zpsxocwxh6g.jpg.html

I'm pretty pumped to ditch the stock wheels. Now I just gotta wait. lol

Posted by: TimeslideZ Jan 10, 2019 - 11:10 PM

Nice man, I ran the 5zigen FN01RC (17x8 +35mm) w/ 20 mm in the back and it sat pretty flush (w/ 235 tires though).
Given that yours is 8.5 though it might poke out a bit?

Posted by: cheela Jan 11, 2019 - 10:08 AM

haha glad I could help then. but regardless they look good from the pics you posted on fb.

Posted by: jaxx6GC Jan 22, 2019 - 12:01 AM

So I got my wheels on a couple of weeks ago. Everything fit better than expected but I ended up having to roll the rear because of a slight rub during spirited driving. I've finally got everything sitting right. Here's some glamor shots from cars and coffee last weekend.

https://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-21_22-33-50_zps8th6bgwf.jpg.html

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-21_22-34-15_zpseg8lx7wb.jpg.html

http://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-01-21_22-34-19_zpsyudrplxi.jpg.html

I'd still like to get a 5mm spacer for the rear to bring it out just a hair more. My wheel specs are 17x8.5 +48 with 225/45/17s and 20mm spacers for those wondering. Ignore the paint, I'm in desperate need of a respray. lol

Posted by: cheela Jan 22, 2019 - 11:11 AM

nice!!! that's basically how mine sits except they're 16s and I don't have to roll fenders because of that. it looks awesome!! what's next? paint job? or engine swap? lol

Posted by: jaxx6GC Jan 22, 2019 - 8:41 PM

I'm probably going to get a new bumper, carbon fibre hood, 2 post spoiler with blocks and then get some fresh paint. I'm planning a 3rd gen 3SGTE swap for next summer. I'm currently rebuilding my S13 so once it's daily-able I'll get to work on swapping Sasha.

Posted by: cheela Jan 23, 2019 - 10:38 AM

hmm... sounds like if you just order a gt-four front clip, you'll be all set. You'll get your 3s swap, a new hood and bumper and headlights. lol

Posted by: jaxx6GC Feb 14, 2019 - 7:23 PM

So I've done a few small things since My last post. I finally replaced the bad sender to my oil gauge and repainted my battery hold down. I also scored a Griproyal Grain and a NRG quick release for my other project from a buddy. Since that things still a couple of months from running I decided to toss it in the celica. Looks pretty dope IMO.

https://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-02-14_18-05-32_zpslhemr246.jpg.html

Next I'm off to find a 2-post spoiler and some riser blocks.

Posted by: jaxx6GC Mar 1, 2019 - 1:01 AM

I Finally got my exhaust redone earlier this month. I went with a 4-inch exit cannon and had my factory resonator and secondary cat deleted. I also replaced everything from the header back with 2.25. I was able to track down a 2 post spoiler too! Now I've just got to wait for my Euro blocks to come in and repaint everything.

https://s1042.photobucket.com/user/Thatjankyst204/media/photo_2019-02-28_17-30-52_zps7vlcgkmr.jpg.html

https://www.youtube.com/watch?v=We4auZDBedQ