Hey guys/gals,
My 97 GT is in my brothers repair shop and we hit a wall. So it's in his shop for valve cover gasket, oil change, and new fuel tank/pump/filter install. We did the valve cover and oil change, but during the fuel tank repair we noticed the old fuel tank bracket and lines are badly rusted and leaking, so we need part # 77203-20190 for the new tank, but that part # is discontinued and I've searched all over the net for aftermarket and can't find anything.
I did find some fuel pump brackets of the 90's Camry and they look identical, but not sure it they would work. Are their any other options? Does anyone on here have any extra's laying around?
Thx.
https://www.amayama.com/en/part/toyota/7720320190
you're welcome. I've ordered from them before and it took about 2 weeks for the part to come in.
You can also check out this site too, like Amayama.com except state side. Also noteable that this is for Stateside vehicle applications too, meaning unlike Amayama it will not give you the Corina, Curren or Corona Models, just what was importable to the states.
https://parts.lakelandtoyota.com/p/TOYOTA_1998_CELICA-LIFTBACK--GT-2200CC-16-VALVE-DOHC-EFI--AUTOMATIC--4-SPEED/BRACKET--FUEL-PUMP-CALIFORNIA-SPEC/4042370/7720320220.html
Cool, thanks guys!
Gas tank is done! New bracket and all new pipes installed.
Next question, what catback exhaust options do I have? My stock catback was a casualty doing the fuel tank install and now I have a reason to upgrade my exhaust. Please let me know.
Del
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)