6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte 4th gen swap, Hello I am trying to swap my Toyota Celica 97 gt to a 3sgte 4th gen
post Sep 21, 2017 - 12:53 PM
+Quote Post
Tmiller

Enthusiast

Joined Sep 21, '17
From Miller42!
Currently Offline

Reputation: 0 (0%)




I have the 3sgte 4th gen engine on the way and getting things ready to go! Looking for help and ways to get it going ! Right now I have done alot of research and talked to tons of people. I was wondering if I could get some help with my project . Right now I'm planning on running the engine stock I made sure it came with the 3sgte hanress and ecu and im getting a flywheel and clutch kit . Iv been looking around and doing research and I might attempt my wiring harness myself I have two harnesses and I might just try it . But I also need help from people that have experience with the swap and the 6gen community. Helping me find parts, and help me get it on the road with a wonder build ! I hope this goes well , would appreciate all the help I can get !

Posts in this topic
- Tmiller   3sgte 4th gen swap   Sep 21, 2017 - 12:53 PM
- - richee3   The harness will not be a small task. I personally...   Sep 21, 2017 - 3:42 PM
|- - Tmiller   I am using the stock 5sfe tranny for my car and I ...   Sep 21, 2017 - 4:28 PM
- - njccmd2002   harness altough is very difficult, its the most im...   Sep 21, 2017 - 5:40 PM
|- - Tmiller   QUOTE (njccmd2002 @ Sep 21, 2017 - 6...   Sep 21, 2017 - 6:07 PM
- - njccmd2002   ok the basic approach to wire a swap that i took i...   Sep 21, 2017 - 8:09 PM
- - njccmd2002   http://www.6gc.net/forums/index.php?showtopic=7378...   Sep 21, 2017 - 9:52 PM
- - richee3   Addressing the clutch, the S54 Transmission (what ...   Sep 21, 2017 - 10:07 PM
- - Tmiller   I am going to be using my 5sfe tranny but I realiz...   Sep 22, 2017 - 12:00 AM
- - HardHead93   I did a 4th gen 3sgte last winter and it is awesom...   Sep 22, 2017 - 12:38 AM
- - njccmd2002   see opinions vary. I could have sent it to the ...   Sep 22, 2017 - 1:19 AM
- - Tmiller   So thats all I need to keep it stock for right now...   Sep 22, 2017 - 3:03 AM
- - richee3   The clutch setup can be confusing, so Iíll try to ...   Sep 22, 2017 - 9:28 AM
- - njccmd2002   does anyone have the wiring documentation for the ...   Sep 22, 2017 - 11:27 AM
- - HardHead93   As far as gauges, I would recommend oil pressure, ...   Sep 22, 2017 - 11:55 AM
- - njccmd2002   all this good info needs to be summarized...   Sep 22, 2017 - 1:15 PM
|- - HardHead93   QUOTE (njccmd2002 @ Sep 22, 2017 - 2...   Sep 22, 2017 - 9:10 PM
- - Tmiller   So in other words I need a 3sgte flywheel with bol...   Sep 22, 2017 - 3:54 PM
- - Tmiller   So what I need to do is get a 3sgte flywheel and u...   Sep 22, 2017 - 7:26 PM
- - richee3   QUOTE (Tmiller @ Sep 22, 2017 - 2:54...   Sep 23, 2017 - 12:08 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 17th, 2018 - 1:24 PM