5sgte rwd conversion |
5sgte rwd conversion |
Apr 16, 2014 - 6:34 PM |
|
Enthusiast Joined Nov 15, '10 From ABERDEEN WA Currently Offline Reputation: 3 (100%) |
well i've started what most people dont have time for. I'm in the middle of building my 5sgte and Rwd conversion,
I have a couple pictures to start with. If you have any question, just ask. I'm using a 88 toyota truck rear end 2wd. This rear end is harder to find, because it uses the 8 inch center section. And that comes with 30 spline axles. I'm not using the third member. I went with a toyota v-6 4x4 3rd member, that will allow you to buy a supra lsd that will bolt into the v-6 housing. I'm going to be using the stock v-6 gears that comes with 4.10 gears, It may be a little high, but i'll run those for a little bit. Also when i have the lsd out, i'm install a WEIR MAXGRIP LSD Kits It increases the locking force of the clutches. So i'll be posting pictures as i go. This post has been edited by toy8490: Apr 16, 2014 - 6:43 PM |
Apr 20, 2014 - 10:09 AM |
|
Enthusiast Joined Jan 13, '12 From Georgia Currently Offline Reputation: 3 (100%) |
I have to say I'm very intrigued by what you are doing here. I always wondered what a R&D celica would be like . Just a few questions for you. How feasible would it be to do this with a 1or 3mz?, would it be the same principle as a V6 swap is now? And also if you are willing to help others with theirs how like ly is it that you would make a kit. Pretty cut subframes mount etc. So that all someone would have to do would be buy the parts and install.
This is probably one of the coolest thing I've seen go down on this site so far I wish you the best of luck with the rest of the build and hope it works out well for you I can't wait to see the final product. This post has been edited by toyota123: Apr 20, 2014 - 11:47 AM -------------------- 97 Celica GT liftback DD/ project
96 corolla back up DD |
Lo-Fi Version | Time is now: March 28th, 2024 - 7:54 AM |