Printable Version of Topic
6G Celicas Forums _ General Discussion _ The Official Junkyard thread.
Posted by: SeverX13 Jan 25, 2011 - 2:07 AM
Who needs what from the junkyard? post up what you need or any interesting finds you may have found for the 6gc.
Posted by: njccmd2002 Jan 25, 2011 - 2:31 AM
yes, a front right fender from a 76 77 celica...
Posted by: JuMPiiN Jan 25, 2011 - 2:46 AM
SOHC MAF please sir with pigtail.
Posted by: SupraKid Jan 25, 2011 - 3:21 AM
Brent, please ship them via USPS, as when they are shipped UPS they always come out wrinkled and cracked in half o_0
Posted by: azian_advanced Jan 25, 2011 - 9:55 AM
i need a front RH abs speed sensor. if you can get one, let me know.
Posted by: jordisonjr Jan 25, 2011 - 1:30 PM
QUOTE (azian_advanced @ Jan 25, 2011 - 9:55 AM)
i need a front RH abs speed sensor. if you can get one, let me know.
I think 808celica may be selling what you need here:
http://www.6gc.net/forums/index.php?showtopic=76479&hl=
Posted by: eboz74 Jan 25, 2011 - 10:39 PM
a st204 gt gauge cluster for my vert
Posted by: njccmd2002 Jan 25, 2011 - 11:33 PM
QUOTE (eboz74 @ Jan 25, 2011 - 9:39 PM)
a st204 gt gauge cluster for my vert
what do you need? i have gas and tach
Posted by: azian_advanced Jan 26, 2011 - 2:41 AM
QUOTE (PhoenixTech @ Jan 25, 2011 - 9:55 AM)
QUOTE (mkernz22 @ Jan 25, 2011 - 10:01 AM)
^The used ones usually snap when you take them out... happened to my passenger side so I'm converting to non-abs now haha
Thumbs up! ABS is for those who don't know how to handle their car anyway!
if you lived up here, you'd wish you did.
QUOTE (jordisonjr @ Jan 25, 2011 - 12:30 PM)
QUOTE (azian_advanced @ Jan 25, 2011 - 9:55 AM)
i need a front RH abs speed sensor. if you can get one, let me know.
I think 808celica may be selling what you need here:
http://www.6gc.net/forums/index.php?showtopic=76479&hl=
shipping would kill though..
anyway i just bought a sensor so i don't need one anymore. thanks anyway OP
Posted by: 808celica Jan 26, 2011 - 3:17 AM
QUOTE (azian_advanced @ Jan 25, 2011 - 9:41 PM)
QUOTE (PhoenixTech @ Jan 25, 2011 - 9:55 AM)
QUOTE (mkernz22 @ Jan 25, 2011 - 10:01 AM)
^The used ones usually snap when you take them out... happened to my passenger side so I'm converting to non-abs now haha
Thumbs up! ABS is for those who don't know how to handle their car anyway!
if you lived up here, you'd wish you did.
QUOTE (jordisonjr @ Jan 25, 2011 - 12:30 PM)
QUOTE (azian_advanced @ Jan 25, 2011 - 9:55 AM)
i need a front RH abs speed sensor. if you can get one, let me know.
I think 808celica may be selling what you need here:
http://www.6gc.net/forums/index.php?showtopic=76479&hl=
shipping would kill though..
anyway i just bought a sensor so i don't need one anymore. thanks anyway OP
gimme your zip and we'll find out. Hubs i bought from Hurley were ABS and my car is non-abs. its sitting pretty in a box in the shed LMK
Posted by: eboz74 Jan 28, 2011 - 7:23 AM
QUOTE (njccmd2002 @ Jan 26, 2011 - 12:33 AM)
QUOTE (eboz74 @ Jan 25, 2011 - 9:39 PM)
a st204 gt gauge cluster for my vert
what do you need? i have gas and tach
the circuit board but preferably a new cluster mine has a few scratches
Posted by: Rusty Jan 31, 2011 - 12:05 AM
***Thread Clean as OP request*** /title also changed
All memebers please remember the forum rules. (keep on topic, no bashing etc)
Posted by: SeverX13 Jan 31, 2011 - 1:00 AM
QUOTE (Rusty @ Jan 31, 2011 - 1:05 AM)
***Thread Clean as OP request*** /title also changed
All memebers please remember the forum rules. (keep on topic, no bashing etc)
Thanks Homie!
Posted by: injection Feb 21, 2011 - 3:14 PM
QUOTE (SeverX13 @ Jan 25, 2011 - 3:07 AM)
Who needs what from the junkyard? post up what you need or any interesting finds you may have found for the 6gc.
Would there happen 2 be a Map Sensor for an ST205...If there is.... I will buy it!
Posted by: mkernz22 Feb 21, 2011 - 3:17 PM
QUOTE (injection @ Feb 21, 2011 - 3:14 PM)
QUOTE (SeverX13 @ Jan 25, 2011 - 3:07 AM)
Who needs what from the junkyard? post up what you need or any interesting finds you may have found for the 6gc.
Would there happen 2 be a Map Sensor for an ST205...If there is.... I will buy it!
you're not going to find one of those in a US junkyard
Posted by: blackthunder Mar 7, 2011 - 10:02 AM
so we can post cool finds here right? if so i think this is my best find so far for only 2,000yen (or around 26us)
Posted by: Lil-Joe101 Mar 7, 2011 - 11:37 AM
I know u did not buy that Beams for Y2000, lol
Posted by: HectortheRican Mar 7, 2011 - 11:39 AM
QUOTE (Lil-Joe101 @ Mar 7, 2011 - 9:37 AM)
I know u did not buy that Beams for Y2000, lol
On a sidenote, if it WAS the beams for 2,000 yen, I'm flying to Japan tomorrow.
Posted by: Lil-Joe101 Mar 7, 2011 - 12:47 PM
QUOTE (HectortheRican @ Mar 7, 2011 - 10:39 AM)
QUOTE (Lil-Joe101 @ Mar 7, 2011 - 9:37 AM)
I know u did not buy that Beams for Y2000, lol
On a sidenote, if it WAS the beams for 2,000 yen, I'm flying to Japan tomorrow.
Granted you can get parts for pretty cheap in Okinawa but not that cheap no way if so, then man I should just stayed there.
Posted by: SwissFerdi Mar 7, 2011 - 12:51 PM
TRD strut bar for $26, nice.
Posted by: Lil-Joe101 Mar 7, 2011 - 12:58 PM
QUOTE (SwissFerdi @ Mar 7, 2011 - 11:51 AM)
TRD strut bar for $26, nice.
Oh ok that's wut it wus
Posted by: SupraKid Mar 7, 2011 - 5:30 PM
Gt front and rear brakes,gt strut bar,black carpet,Full vert top,full rear quarter panel(jam to bumper),stock tweeters and covers,black rear view mirror,vert led brake light..$90
Posted by: blackthunder Mar 8, 2011 - 6:09 AM
lol if BEAMS were only 2,000 yen i'd buy a whole lot more than just one!
Posted by: 808celica Mar 9, 2011 - 10:35 PM
if anyone finds GT shifter cables LMK I need 2 sets
Posted by: b22ri22an Mar 11, 2011 - 4:25 PM
i need rear interior quarterpanels from a vert both left and right
Posted by: Timmyface Sep 6, 2011 - 6:53 AM
Bump. If anyone has a Temperature Gauge needle. i could sure use one
Posted by: BonzaiCelica Apr 25, 2014 - 2:37 PM
Muhaha sticky bump.
In need of. Driver side, left hand drive celica, seatbelt. I need a 96-99 Celica GT or ST driver seatbelt thanks
Posted by: BonzaiCelica Apr 28, 2014 - 5:23 PM
bump! again!
Posted by: 1994Celica Apr 28, 2014 - 5:42 PM
If anyone could find some clutch hard lines for a GT , that would be great.
Posted by: BonzaiCelica Jun 10, 2014 - 1:51 PM
Hey guy above me do you still need those hardline.
Btw I need 98-99 cruise control switch and 97-99 Celica GT seatbelt for driver side
Posted by: 1994Celica Jun 12, 2014 - 9:45 AM
QUOTE (BonzaiCelica @ Jun 10, 2014 - 1:51 PM)
Hey guy above me do you still need those hardline.
Btw I need 98-99 cruise control switch and 97-99 Celica GT seatbelt for driver side
Yes I still need the clutch hardlines
Posted by: sandusky1977 Jun 12, 2014 - 11:00 AM
I want a 3 post 99 Steering wheel with airbag,. if anyone comes across one.
Posted by: BonzaiCelica Jun 13, 2014 - 6:14 PM
QUOTE (1994Celica @ Jun 12, 2014 - 9:45 AM)
QUOTE (BonzaiCelica @ Jun 10, 2014 - 1:51 PM)
Hey guy above me do you still need those hardline.
Btw I need 98-99 cruise control switch and 97-99 Celica GT seatbelt for driver side
Yes I still need the clutch hardlines
yo dude i sent you a private message. you best reply by today or early tomorrow i'm going to the yard on sunday.
QUOTE (sandusky1977 @ Jun 12, 2014 - 11:00 AM)
I want a 3 post 99 Steering wheel with airbag,. if anyone comes across one.
good luck. although if someone does message you make sure not to forget me as im looking for the 98-99 cruise control switch on steering wheel
Posted by: Cabilo Jun 22, 2014 - 9:09 PM
I don't know if anyone can help me out here but I need a 3rd gen 3SGE ECU for auto tranny (89661-2D500). Can't find one anywhere.
What would be the best ECU I could go with in the meantime (performance/wiring compatibility)?
Posted by: BonzaiCelica Sep 8, 2014 - 8:30 PM
Bump. Looking for a silver not dented 96-99 Celica front bumper along with the fogs. Local pick up only and this weekend pick your part junkyard is having 50% off all so cal locations
Posted by: Warapparel Sep 27, 2014 - 7:03 PM
I finally got a hatch cover for the rear! Only 30 bucks! Found a good condition pass. Side door panel and a padded armrest .
Posted by: Warapparel Oct 4, 2014 - 2:57 PM
Oing to the junkyards today to get a new wheel hub. Any requests?
Posted by: Syaoran Oct 4, 2014 - 4:36 PM
QUOTE (Warapparel @ Oct 4, 2014 - 3:57 PM)
Oing to the junkyards today to get a new wheel hub. Any requests?
I need a pair of rad supports
Posted by: 1994Celica Oct 4, 2014 - 5:53 PM
QUOTE (Syaoran @ Oct 4, 2014 - 4:36 PM)
QUOTE (Warapparel @ Oct 4, 2014 - 3:57 PM)
Oing to the junkyards today to get a new wheel hub. Any requests?
I need a pair of rad supports
I might have some off my old gt4 clip. I'll check tomorrow.
Posted by: Warapparel Oct 6, 2014 - 2:26 PM
None of the yards had a drivers side seatbelt sorry bonzai. One of the yards has a 95 convertible, a 95 black hatch that I picked my parts from. The floor mats are in great shape minus the drivers side. It has the rear seats and plastics still. Doors are in tact but no panels. There is also a 99 convertible at another yard but the drivers side was cut out. Interior is shot. I pulled the pass door panel from them a few weeks ago. There's also a few 7th gens in stock. A set of 6th gen gt wheels with nearly new tires on them. About 80% tread left. I'll be going back next month to get more parts
Posted by: BonzaiCelica Oct 6, 2014 - 3:25 PM
It's fine we swapped the retracting mechanism from 96 seatbelt to 99 and everything works fine
Posted by: benzo Oct 7, 2014 - 9:39 PM
Yo. Im looking for fog light brackets.. anyone got em for sale?
ship or pick up to 93722 ca
benzo559@gmail.com. thanks
Posted by: Syaoran Oct 8, 2014 - 2:08 AM
QUOTE (1994Celica @ Oct 4, 2014 - 6:53 PM)
QUOTE (Syaoran @ Oct 4, 2014 - 4:36 PM)
QUOTE (Warapparel @ Oct 4, 2014 - 3:57 PM)
Oing to the junkyards today to get a new wheel hub. Any requests?
I need a pair of rad supports
I might have some off my old gt4 clip. I'll check tomorrow.
LMK
Posted by: walvoords Oct 17, 2014 - 1:14 PM
I may need MAP sensors.
I may be dense, because I've spent 2 hours on the web looking for 1999 Celica Mass Airflow Sensors.
Does the 99 not have one?
Does the MAP control some of the air/fuel mixture?
I'm getting the P0171 code for "fuel trim is too lean"
I replaced the fuel filter and it stopped pinging, so it runs great.
Any advice welcome, hate to spend $500 to have it diagnosed.
Posted by: mengman Nov 18, 2014 - 3:51 PM
Im loking for a 3S-GE (III) that you can take some of the harness for the conector for the coolent sensor and a bit cable (so i got something to solder on), this is the one wire sensor that feeds the instument panel.
Another part you just cant ebay
Posted by: BonzaiCelica Nov 25, 2014 - 5:18 PM
50% off this week from the 27th-30th @ pickyour part in So CALifornia
Posted by: sandusky1977 Dec 2, 2014 - 11:04 AM
Wondering if anyone has a 97-01 Camry V6 or 99-01 Solara V6 near them at a pick and pull?
I'm looking for an engine harness for a swap, and the one I have is the older style, and has several broken sensors plugs and the general well being is pretty bad.
Can Paypal price + shipping if someone has the time, I've got the cash.
Posted by: njccmd2002 Dec 2, 2014 - 11:54 AM
what broken plugs you have. you can get them new i have the books for toyota part numbers.. and plus also have a few plugs laying around..
Posted by: joaquin Dec 2, 2014 - 12:25 PM
Looking for a 5sfe engine harness. It's a 94 celica g.t with california emissions if you see one let me know
Posted by: njccmd2002 Dec 2, 2014 - 1:36 PM
QUOTE (joaquin @ Dec 2, 2014 - 11:25 AM)
Looking for a 5sfe engine harness. It's a 94 celica g.t with california emissions if you see one let me know
82121-2H730 thats what you need, CAlif spec. very rare, only made for 2 years and only sold in Kalifornistan. Why not just use a regular and and the missing pins...
Posted by: joaquin Dec 2, 2014 - 10:20 PM
The harness I have is 82121-2h740-j can't find it
Someone around here is selling one that's is 82111-2h104
http://www.toyotapartszone.com/Page_Product/NarrowDownPart.aspx?partNumber=82111-2H140&VIN=JT2ST07N9R0007925&destination=USA&conditions=(0=ST204L-BLPGKA;1=5SFE;3=LB;4=GT;5=ATM;7=USA) This place says it fits
What would you guys say ? Need an answer lol
Also did an auto to manual swap and kept the auto harness so my part number is to an automatic and the new harness they are selling is from a 5 speed ?? Help if any one can thanks
Posted by: sandusky1977 Dec 3, 2014 - 11:43 AM
QUOTE (njccmd2002 @ Dec 2, 2014 - 11:54 AM)
what broken plugs you have. you can get them new i have the books for toyota part numbers.. and plus also have a few plugs laying around..
Yes but it's a non vvti harness, and I am thinking I want the VVTI so all I'm doing is extending it, rather than swapping it over to the newer style.
Posted by: njccmd2002 Dec 3, 2014 - 11:46 AM
82111-2H140 you have a typo...
this harness pulls up for a 7AFE MTM per toyo DIY...
http://www.toyodiy.com/parts/p_U_199309_TOYOTA_CELICA_AT200L-BCMSKA_8202.html?hl=82111
why do you need the harness, you can just clean up your own harness by removing plugs you dont need... its easier....
nevermind it also pulls for a 5sfe, and that cant be possible. lol..
http://www.toyodiy.com/parts/p_U_199401_TOYOTA_CELICA_ST204L-BLPGKA_8202.html
QUOTE (sandusky1977 @ Dec 3, 2014 - 10:43 AM)
QUOTE (njccmd2002 @ Dec 2, 2014 - 11:54 AM)
what broken plugs you have. you can get them new i have the books for toyota part numbers.. and plus also have a few plugs laying around..
Yes but it's a non vvti harness, and I am thinking I want the VVTI so all I'm doing is extending it, rather than swapping it over to the newer style.
then just get the vvti plugs.. if that is what u need.. lol.
Posted by: joaquin Dec 3, 2014 - 3:05 PM
Yeah that's why I was asking cause it says it will work but I'm not sure
Plus the number I wrote is right I got it from the tag on the harness.
And my harness went to **** lol the conneter to the distributor broke off and I've tried to rewire it and it isn't turning on
Plus I'm not getting spark.
Posted by: njccmd2002 Dec 3, 2014 - 4:05 PM
i have several plugs. do you have a pic?
Posted by: bboytech Dec 23, 2014 - 11:28 PM
Greetings. I need an AC-idle up valve with both vacuum hoses.Thanks a mil! (1994 Celica GT)
Posted by: bluebeast1562 Jan 7, 2015 - 8:41 AM
Looking for stock headlight assemblies for a 95. High and low times 2 each?
Thanks
Posted by: The Jan 12, 2015 - 4:12 AM
QUOTE (SeverX13 @ Jan 25, 2011 - 2:07 AM)
Who needs what from the junkyard? post up what you need or any interesting finds you may have found for the 6gc.
If anyone knows/has any st165's or equivalent speedo drive gears that will work let me know!
Posted by: HaysoosKreesto Jan 24, 2015 - 4:46 PM
Bought the plastic liner for the wheel hub
Posted by: sircalebwhite Jan 27, 2015 - 9:54 AM
Looking for a facelift front bumper cover for my 6gc along with the hatch wiper motor and a 5sp trans. Sucks to find stuff for 6gc's in mn because they are all rotted out or smashed to crap. or if anyone knows of any salvage yards with 6gc's around the metro or preferably north of the metro that would be great!
Posted by: BonzaiCelica Feb 12, 2015 - 2:03 PM
found a 97 red convertible 5sfe in Anaheim, CA junkyard....
Posted by: BonzaiCelica Apr 8, 2015 - 6:56 PM
Hi looking for OEM negative battery terminal post along with the cable that grounds/attaches to the radiator support and top of transmission
Posted by: The_Chazzman Apr 17, 2015 - 5:58 PM
Need to find an OEM front bumper and some headlights. Can't seem to find them anywhere without actually buying another car...
Posted by: TRDMR2MK2 Apr 26, 2015 - 2:05 AM
Just picked up 98 foglights, bumper and side skirts at a local pick a part. Sad to say I think the car belonged to a member who was recently rear-ended out here in so-cal.
Posted by: BonzaiCelica Apr 26, 2015 - 2:52 AM
QUOTE (TRDMR2MK2 @ Apr 26, 2015 - 2:05 AM)
Just picked up 98 foglights, bumper and side skirts at a local pick a part. Sad to say I think the car belonged to a member who was recently rear-ended out here in so-cal.
The color?
Posted by: TRDMR2MK2 Apr 26, 2015 - 4:56 AM
Red its at the Riverside pick a part on pyrite.
Posted by: celicaracer8o5 Apr 26, 2015 - 12:35 PM
looking for fenders and a front bumper. my fenders are damaged beyond repair.
Posted by: TRDMR2MK2 Apr 26, 2015 - 2:52 PM
There's the 98 in riverside driver fender was in good shape just needs paint
Posted by: HectortheRican May 6, 2015 - 9:29 AM
If anyone finds a set of rear brake dust shields from a GT, please drop me a PM! I'll make you an offer.
Posted by: Keiri May 6, 2015 - 10:29 AM
QUOTE (HectortheRican @ May 6, 2015 - 10:29 AM)
If anyone finds a set of rear brake dust shields from a GT, please drop me a PM! I'll make you an offer.
I'll keep an eye out Hector.
Posted by: BonzaiCelica May 6, 2015 - 2:41 PM
QUOTE (HectortheRican @ May 6, 2015 - 10:29 AM)
If anyone finds a set of rear brake dust shields from a GT, please drop me a PM! I'll make you an offer.
It's not hard to remove?
Posted by: HectortheRican May 7, 2015 - 8:29 AM
QUOTE (Keiri @ May 6, 2015 - 9:29 AM)
I'll keep an eye out Hector.
Thanks man! I appreciate it.
QUOTE (BonzaiCelica @ May 6, 2015 - 1:41 PM)
It's not hard to remove?
I know, there just aren't any GTs in my area, unfortunately. Every yard around me has at least one 6gc but they're all STs, wouldn't ya know haha
I got my GT brake conversion hardware from a guy but he packed it like ass and one of the shields just snapped in half...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)