6G Celicas Forums

Welcome Guest ( Log In | Register )

> The E56 Transmission thread, info & troubleshoot
post Jan 27, 2014 - 7:11 PM
+Quote Post

Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)

The E56 Transmission:

General info:

Type of Transaxle:E56-07C Manual
Notes: Viscous LSD (C )
Type of Engine: 3S-GE
Models: ST202, ST206, ST207 (Only SS-II 94-95 Superstrut, and some Superstrut model Currens)
A triple- cone type synchromesh mechanism is used in the 2nd gear and a double- cone type synchromesh mechanism is used in the 3rd gear to improve the shift feeling characteristics. This helps to reduce the shifting effort.
A reverse synchromesh mechanism is used to suppress gear engagement noise in reverse gear shifting.
External fin transmission oil cooler. Uses the same transmission front cover only (effectively the bell housing) as the E154F with a plate where the transfer case would connect.

Gear Ratio:

1st Gear: 3.538
2nd Gear: 2.045
3rd Gear: 1.333
4th Gear: 1.028
5th Gear: 0.820
Reverse Gear: -3.583
Differential Gear ratio: 3.944


Oil Capacity: 3.5L (3.7 US qts , 3.1 Imp. qts)
Oil Viscosity: SAE 75W - 90
Oil Grade: API GL-3, GL-4 or GL-5


Use the table below to help you find the cause of the problem. The numbers indicate the priority of the likely cause of problem. Check each part in order. If necessary, replace these parts.


The engagement of the transaxle gears.


Posts in this topic
- Rusty   The E56 Transmission thread   Jan 27, 2014 - 7:11 PM

Closed TopicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:


Lo-Fi Version Time is now: October 28th, 2020 - 12:17 PM