6G Celicas Forums

Welcome Guest ( Log In | Register )

5 Pages V  « < 3 4 5  
Reply to this topicStart new topic
> JasonTX
post Aug 13, 2014 - 3:31 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Everything on the new motor looks great! Excellent progress.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Aug 16, 2014 - 9:32 AM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




thanks bud, looking forward to getting it back on the road


--------------------
JN 3:16
--------------------------------------
post Aug 18, 2014 - 5:57 PM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




No chance to get down to houston today but i did get an hour to work on some of the parts i got from bsamps4 a few months back. Gonna use the relays and box from the IC pump to run the pump, water injection, and the foglights. I have plenty of left over relays and wire from other toyota harnesses so it should look like a factory solution.

I got a bench supply on the pump but without a diagram of the factory subharness i cant seem to figure out why toyota used a 5 pin connector. prolly powering other devices that come on with the pump. if anyone knows or has the diagram let me know




--------------------
JN 3:16
--------------------------------------
post Aug 18, 2014 - 6:23 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)








If you have questions, post em up.


--------------------
post Aug 18, 2014 - 7:23 PM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




wow thanks bud. that's just what i needed, that'll make the rest a snap.

btw is this saved somewhere in the stickies in a little higher res?

This post has been edited by JasonTX: Aug 18, 2014 - 7:28 PM


--------------------
JN 3:16
--------------------------------------
post Aug 18, 2014 - 8:47 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




PM me your email address, I'll send you the EDW.


--------------------
post Aug 19, 2014 - 2:21 AM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




quick question.

anyone have the size on the belts for the 3rd gen 3sgte or do the accessory belts from the 5s or 2nd gen 3sgte run the same size as the 3rd gen? I'm about 10 miles from the auto parts place and dont wanna make multiple trips to get the size right.


--------------------
JN 3:16
--------------------------------------
post Aug 20, 2014 - 2:11 AM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




couple of additional pics. not new stuff but finally close enough to pull em out of boxes and get em ready to take down to the hanger for install.





--------------------
JN 3:16
--------------------------------------
post Aug 20, 2014 - 4:15 PM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




making a bracket to hold the water injection distribution block. i measured it up and tacked a few pieces together that were laying around the hangar.




and brought it out this afternoon and got it all welded up, holes drilled and threw some paint on it.



This post has been edited by JasonTX: Aug 20, 2014 - 4:47 PM


--------------------
JN 3:16
--------------------------------------
post Aug 20, 2014 - 4:43 PM
+Quote Post
enderswift



Enthusiast
*****
Joined Jul 12, '08
Currently Offline

Reputation: 5 (100%)




You will enjoy this. Make sure you ground it at the chassis under the car


--------------------
post Aug 20, 2014 - 4:51 PM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




QUOTE (enderswift @ Aug 20, 2014 - 4:43 PM) *
You will enjoy this. Make sure you ground it at the chassis under the car


ground the cutout to the chassis or are you talking about water injection?


--------------------
JN 3:16
--------------------------------------
post Aug 20, 2014 - 10:18 PM
+Quote Post
enderswift



Enthusiast
*****
Joined Jul 12, '08
Currently Offline

Reputation: 5 (100%)




Ground the cutout at the chassis. Otherwise it uses the exhaust as a path to the engine ground wires, turning any aluminum on the way into white powder. In my case the aluminum exhaust gaskets I bought were slowly disintegrating.

And the meth injection looks good. I wasn't knocking your design, just curious because I wondered about even distribution to each cyl too. It's just a trade off between equal delivery and heat absorption, really no one ideal setup.

Looking forward to more updates!


--------------------
post Aug 21, 2014 - 12:47 AM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




QUOTE (enderswift @ Aug 20, 2014 - 10:18 PM) *
Ground the cutout at the chassis. Otherwise it uses the exhaust as a path to the engine ground wires, turning any aluminum on the way into white powder. In my case the aluminum exhaust gaskets I bought were slowly disintegrating.

And the meth injection looks good. I wasn't knocking your design, just curious because I wondered about even distribution to each cyl too. It's just a trade off between equal delivery and heat absorption, really no one ideal setup.

Looking forward to more updates!


intresting i would never have thought to check that before. thanks for the heads up.


--------------------
JN 3:16
--------------------------------------
post Aug 23, 2014 - 1:36 AM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




Thanks again to dustin, used the files you sent me to get the wiring sorted. I had just enough spare toyota relays and pins to make up this relay box.

I used the fuses for the systems that the relay box holds

I am using a spdt relays to run my meth injection and spraybar

the first spst relay to run the IC pump continously and the second will be used for the Fogs

and they are the same relays from main fuse box so if one goes out on the road i can quickly swap one from one of these non critical systems to get me home





--------------------
JN 3:16
--------------------------------------

5 Pages V  « < 3 4 5
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 3:48 AM