6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte cranks but will not start, Possible anti theft mode
post Sep 5, 2012 - 7:21 AM
+Quote Post
Joebo003

Enthusiast
*
Joined Aug 23, '12
From New jersey
Currently Offline

Reputation: 0 (0%)




I swapped in a 3sgte in a 94 celica gt all the wiring done correctly (i hope) and now it cranks but wont start i hae no spark and my injectors r not firing any help would greatly be appreciated ...all lights work on dash so i dont think its the ecu any help would reallly help thanks

Posts in this topic
- Joebo003   3sgte cranks but will not start   Sep 5, 2012 - 7:21 AM
- - PhoenixTech   Have you checked your main EFI fuse to make sure i...   Sep 5, 2012 - 10:10 AM
- - Joebo003   I replaced the efi fuse...... i cut a hole in the ...   Sep 5, 2012 - 8:46 PM
- - PhoenixTech   Have you checked to see if you're getting powe...   Sep 6, 2012 - 11:54 AM
- - Joebo003   No i havent done that yet ill try that and see wha...   Sep 6, 2012 - 6:18 PM
- - Joebo003   I got it started but it wont start with the 3sgte ...   Sep 12, 2012 - 6:46 AM
- - Smaay   its possible that you got a bad ECU, but im thinki...   Sep 12, 2012 - 8:57 AM
- - anonymous   It sounds like you may not be getting a cylinder p...   Sep 16, 2012 - 11:45 AM
- - Joebo003   Do u have the write up for the ecu wiring i have n...   Sep 17, 2012 - 7:56 PM
- - BuiltNotBought   Bump. Have same issue.   Sep 25, 2012 - 4:10 PM
- - bsamps4   Hopefully this topic will help you. http://www.6g...   Sep 26, 2012 - 7:43 AM
- - Neon90424   here you go sir   Sep 26, 2012 - 8:59 AM
- - Joebo003   I had a someone do my wiring and everything seems ...   Oct 2, 2012 - 9:17 PM
- - team_omega   What Gen 3sgte did you swap into your car?   Oct 20, 2012 - 4:34 PM
- - Soulend   are you sure your timing is correct? that'll s...   Oct 22, 2012 - 1:57 AM
|- - Joebo003   Sorry havent been on here much its a 3rd gen and t...   Oct 22, 2012 - 10:28 AM
- - Smaay   kick ass! i knew it was the ECU   Oct 23, 2012 - 8:46 AM
- - Joebo003   Car now runs and drives but its throwing a code 54...   Dec 4, 2012 - 9:53 AM
- - Neon90424   I thought you just had to bridge the conectors..   Jan 14, 2013 - 2:09 PM
- - Smaay   do this at the ECU connectors. This worked on my c...   Mar 11, 2016 - 12:24 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 6:25 PM