Well Im not on here much but i decided to start a thread on this long over due project.
PLEASE NO POST'S OR PM'S ASKING HOW TO TITLE..NEED TO GET CAR HERE FIRST.
Bought in 2003 and picked up in 2004
Towed from Calgary to very rural Iowa
where it sat for last 8 years at friends shop .
Repairs started in Aug 10'
MODS (SO FAR)
98 JDM CELICA Steering wheel
98 Shift knob
98 SILVER interior trim
98 projectors set
98 SS-III F/R splitters (real) and sideskirts
98 tail lights
98 jdm door sills
98 Full Toyota "confetti" Recaro interior F/R (Toyota recaro rails too!)
new jdm rear visor
new jdm side visors
2 sets brand new hyper sports 5 peice mat set
1 set of "shag-o-lious" jdm blue stripped mats
Modded TRD strut bar
Legalis R exhaust (Nice tone and quiet with 4" tip)
Wolife lights front and 3rd brake light
Oem clear side lights
Real TRD rear spoiler
TRD short shifter
Seat Heater switches for Toasty Recaros
English and Japanese Owners manuals
JDM oem Keyless entry
2 speaker door panels
Converted mph gauge cluster
WRC rear spoiler (real)
gunmetal celica emblems
cusco lower brace
MORE TO COME
I've always wanted to drive over and check this car out. I may still have to.
the epic... is strong with this thread
Old pic from 08 when spoiler came in from Australia (paid $100 for spoiler, though cost $140 to ship)
DAMN!
how did you .....LOL
nice car, how confortable are those recaro seats? I think i saw them once on ebay, but i refused to pay a lot of money
I love that steering wheel lol if you EVER change it I call dibs on it!!!! I had one like that in my 2009 Cobalt SS Turbo and loved it to death. My Celica has the nice 3spoke steering wheel but not that sexy leather, i needz to find me one lol.
Congrats, i just would like to know how the hell you got it past customs. let alone register it even though you said dont ask. you dont have to tell. Id pay you if you tell me. seriously. lol anyways nice car and project your one lucky american
Move to Canada.... live there for at least a year... wait a minimum of 4 months just to get the thing shipped over... then figure out a way to get it registered and get a title.... way easier said than done.
It was almost easier than buying a car in the states but this was done years ago and things have changed
since. One key point is car was brought in as parts car so i with paperwork pre done and taxes paid i was
only at border 15 mins to get inspected and had no issues.
ahh nice gt-four. i may just pick it up if you sell it
Car was buried in a 40 ft trailer and listed as 2 clips . Had a 96 mr2 hanging above it.
Had 0 issues getting to canada. This was years before rush of popular jdm cars and not
sure it would be as easy now.
My opinion on Canada is this , people are great , Govt is horrible, I can't stand big brother
type Govt. I live in midwest so no one here cares about RHD car or what is or
isnt DOT. Im 36 so i won't be hanging out much ,so no worries there. We have
0 inspections on anything so bye bye oem cat downpipe.
Going to frame shop soon..more pics to come
Please forgive me but all these past 6 years I thought that you had a running gt4 that you drove on the streets. I remember you popping up every once in a while to post pictures. What car were you taking pictures of?
South Carolina has no inspections, and what we call kit cars. Application process for the kit car is simple, and cheap. You do have to have a DMV agent check it out, but they are only looking for receipts to confirm nothing is stolen. RHD is also no problemo to drive here, seen atleast 3 within the last month.
Insurance can be acquired with no inspection of the vehicle in SC as well.
Guys drive around here with just frames of a vehicle, and big arse engines mounted on the back. Just have to have proper signaling equipment.
Now the border process I'm unaware of, and having it checked out by a Canadian friend. Hopefully I hit the lotto =P
--------
On topic - Lucky lucky you, nice GT4. I'm slightly confused on the span of time taken, but either way...its a GT4!
well isn't this interesting I was just about to start a thread about exactly what you guys are talking about here
Months later and progress is still SLOOOOOWWWWWWW! Sadly my body guy also have his own
stable of Toyota project cars 85 AE86 GTS Loaded,88 MK1 S/C,91 ALL-TRAC,93T MR2 W/14,000 MILES
and all red . The part i hate the most is he paid 2500 tops for all 4 cars.. none were wrecked just
weird issues that landed them in insurance auctions 10 years ago.
Just bought Black Beams clip from RPM GARAGE (yes i know) and got it for well under what he wanted for
it as i knew him when he lived in Chicago. Not a big fan of shipping from Hong Kong but i wanted a mint
clip and even with fees etc. still not much more than EBAY Beams motor. I ordered a lot of extra parts
as this is going to be full on authentic Beams st202 including RHD.I am using RHD parts to keep wiring and
etc oem as possible. Plus already owning a ST205 i know all the dumb little parts needed for swap and to
make authentic. Would have prefered to just buy a real st202 Beams but much easier to do it the hard way
if that makes sense.lol
This will be a ground up chassis build and body will be redone and painted and rust proofed again. All suspension
will be coated in POR15 as well as poly bushings and new bearings in hubs.
So far here is what already have for Beams
TRD superstrut coilovers
TRD strut brace
hypersports celica mats
TRD carbon radio trim (may install in st205 instead)
SS3 skirts (all 6) bought entire set for $38 in japan!!
Recaro confetti seats F/R and oem Toyota Recaro rails
TRD short shifter
Rear molded Celica cargo tray
rear strut brace with leather and strut covers
JDM tails
door sills and plates
More on the way when clip/container arrives !
So by end of summer hopefully have a 2 JDM white Celicas. st205 and st202. Now why i need 2 RHDs at my age is beyond me.
Guess after 20yrs of modding imports just want to finish with 2 unique cars.
http://www.youtube.com/watch?v=5Sz7mG4lhcU&feature=player_profilepage
NICE! Can't wait for the finished product!
your going to keep the superstrut suspension and transfer it over to the project car?? with used trd coilovers?? are you going to get the coilovers rebuilt???
LOL did you buy the rear recaro seats off RPM Garage? I put a bid in but I guess you bought it out!?
Nice builds man looking forward to the end results
Trd coilovers are easy to rebuild as basically
it is a kyb insert inside that is why chose over
Tein ,etc...
Yes i will be using superstrut and every other
bolt on clip.
No didnt offically buy backseat. He wont budge under
300 and paid way less for last one. He might of pulled
and put with my container
I was just looking into getting a GT4 from canada over here. I've found two that Ica nget a hold of, I jsut gotta check with local DMV to see what I can do about getting it titled and such.
Can't wait to see the beams swap.
man all this talk about importing and such yet sadly never any concrete info. I'm just chillin here in Japan with my BEAMS itching to go back to the states with no good leads on how to make it happen. I guess It is a little different bringing a running car back and not a clip or parts car >.<
I drive a JDM celica here in Texas, no issues. Insured, inspected, ready to rock.
Like i always say biggest issue is getting into country then many ways to title and register
Been importing parts for almost 20yrs so seen and heard all kinds of stories..
As far as KYB i am not hardcore about getting exact same insert and besides it will be
overpriced anyway. I will get around to looking into but priority is building car(s) first.
I am sure KYB japan has a similar part for cheaper than rebranded TRD stuff. I have
Superstrut,strut and mr2 TRD coilovers all in need of inserts so will need my attention
just not right now
I just sent my last mr2 parts car (#7) to scrap and now room for celica and will be
stripping down this week. Progress on one car at least..
ANY COMMENTS ON IMPORTING PLEASE FIND APPROPRIATE THREAD THRU SEARCH ..
I love the 2 RHD cars idea. I had 2 before it was nice to have them both. I know I'll prob get flamed but I've searched and searched, and I thought you couldn't tow a car across the US/CAN border without customs paperwork.
Ok time for the old man to update this thread.
Bought a GT from fellow member from VA
This car will become SS-3 project ..
Couldn't wait so added parts had sitting around.
Recaro SR3 confetti seats with Toyota Recaro rails for ST20#
Rear jdm cargo tray
jdm tails
rear strut brace
TRD front strut brace
special edition car mats
trd short shifter
SSIII red stitching wheel and shift knob
TRD coilovers
5zigen 18x8.5 245/40r18 Nittos (NOT RUBBING AT ALL)
96+ bumper(not installed)
complete SSIII 6pc side skirts ( shipped from japan,not on yet)
TRD spoiler (real no fake parts on my cars)
Ton more to come
Clip finally shipping in next 2 weeks with a load of other parts.They be available for sale in late August
Just got in SS TRD coilovers that need a tear down
Just got in complete interior parts from TRD SPORTS CURREN
These were special Currens with TRD kits and interior trims
TRD radio trim, Non airbag Momo TRD wheel,TRD shift knob, TRD sports badge (these parts are going in st205 as has no bags)
So right now expect for wheels and few other bits the st205 and SSIII with be almost identical when complete
Truckload more rare parts are on the way for both cars..
i also collect celica books, etc these will be with ST205 as collector items more than anything.
Have one more set of Toyota books to get and a few minor brochures
I wanna see this beams swap..... hell hopefully the WRC will be done by then and i can drive it up there
I do have to say, you and I share similar taste when it comes to white 6gc's. I won't let anything but OEM touch the exterior of my Celica and most of the interior, aside from the nick-nacks like the TRD shift handle.
Looking forward to this build.
Ooooo Nice find on those TRD coilovers and interior carbon fiber bits!!!
Hmm that clip looks familiar, is it an SS-III beams with superstrut??? how many miles on clip??
Whats your current setup of suspension on the white celica thats going to have the beams motor, rhd and superstrut setup. If your running lowering springs right now, the install of those trd coilovers will rub for sure right?? why such wide tires?? 235 wide would of fit your 8 inch wide wheel right?
btw very jealous of your Superstrut Set up.
Yeah the clip is from Rpm Garage. Not super thrilled about it but
no one else sells clean beams clips. I know Keith so deal he gave
me was ol' friend discount.
Since both Celicas will be "fun" cars Im doing complete conversion.
I buying complete doors with clip as well.
Current setup is standard TRD coilovers (non ss) and rims are 18x8.5.
I got them with tires for $475. I put on along with coils and suprised
by only very slight rubbing in lock to lock turns. 245/40 is tad big but
grip is absolutely amazing . After owning 18 Mr2s over last 13yrs i
dont even miss mid engine handling after driving this car.
I have JDM 98 interior in both cars. Im having the TRD wheel and knob
redone in new leather with red stitching. Since no airbags in 205 made
more sense to run non airbag wheel. Only OEM guy but TRD is considered
oem as these parts were sold on a new Curren. Im also close to 40 so my
tastes are clean oem style.
Are you planning on doing the work yourself for the swap or do you have a mechanic?
Haha, i used to run a shop 15yrs ago. Im so anal about details no shop would
want to touch anyway.
The only reason I ask is because you haven't posted any pictures of work being done. Could you post some of the repair process of st205? I would like to see how much work it is because I see a lot of front end collision celicas at auction and always wondered if its possible to get all the bumper/hood/fender to line up after a front end accident.
Oh, Well St205 is 7hrs away right now but will get pics as we go along.
I know my body guy said hopefully will staighten out on frame rack.If not
we will replace left side apron using St205 front cut i have.
Nice collection of manuals you have there, any chance of saying what ones are what?
Great find on the TRD radio trim, no luck I guess finding the guage cluster one? Is the TRD wheel ST20# year specific? There are few for sale but they're either 97+ celica or for another toyota model
Once i get other set of manuals( which i have no idea what used for)
I will post seperate thread on books . Great books if i knew japanese!
Small white book is entire epc for jdm 6th gen. Late 93 to early 99.
Need a part number pm me if cant find online.
Shop was parting out entire TRD Sports Curren. (wing,bumper,interior) so.
this is a Curren part but same wheel came in Momo interior on Anniversary
model. Also have orange dial arms with gunmetal accent guage cluster also
on Curren and Celica special editions. Pics below is example.
Rusty gonna hate me but radio trim complete was $100 ..lol
Damn I would love to get a hold of Curren parts for my Celi. Hell a whole front end would be amazing.
opps sorry, I skimmed over the part were you said they all were originally from the curren. Damn thats a good price ......... I've got the guage cluster surround
Catching up with me & TRDGT4, with the amount of TRD bits on one celica.
people have mentioned something about not being able to use ST204 and ST202 axles on Superstrut Suspension is this true???
something about splines????
sorry i dont know myself plus i will be using every nut and bolt on clip including axles .
I have all the Toyota JDM EPC'S for last 20yrs as well as ST# 93-99 JDM Celica EPC book and the numbers are
same for SS1,SS2,SS3 .I also checked inner hubs and bearings etc are same #
Not the first to do this Scott in Mich did awhile ago but is going back to Mac struts . Though it has st205/mr2
axles and st205 hubs. http://www.6gc.net/members/1276
As far as rebuild all my coilovers are ok for now. Once both cars are on the road and complete i will look into
rebuilding. One thing i am not doing is going to pay crazy money for inserts. I have contacts in Japan i will have
look into but for now not a major priority for me. When i do rebuild i will post a thread on findings of course.
been a month already any updates???
Well not a whole lot of update on ST205 but st202 clip shipped this week(finally) from Hong Kong
I also have my other real TRD spoiler on way so both cars will have authentic SS-III and TRD parts.
Clutch plate broke on donor chassis transmission so tear down will start next week. I am also rebuilding a ST
while wait for clip to arrive.
Sourcing st205 brakes for st202 as well so i can order brake pads in bulk from Europe for both cars
Here is clip pics from RPM garage ..GREAT SERVICE and gave me a lot of parts for free
Besides clip i had SS-3 doors shipped(no rust) so RHD swap will be a totally bolt in besides firewall.
Recaro back seat in there as well so both cars will now have 100% complete factory Recaro
interiors.
They've put a bit of work into that frame and a good use of recycling too with the hoods. Nice connections you have there btw to get all that stuff. The SS-III & TRD scheme should look great.
also pm you regarding the guage cluster
haha didn't pay much attention to the shipping quality. Ya hoods for reinforcement and that clip was very much cushioned and would of probably floated if it fell off the boat.
Your Momo steering wheel looks like the ones used on ITR DC2.
Here is a beams cluster and Curren TRD sports cluster. The Curren one
just has orange dials and gunmetal surround. Could easily replicate with
some graphite wheel paint. I am so anal about OEM look i bought these
for parts. I am using to build a St205 cluster that looks identical to beams.
I am having new mph faces made and 3 guage face made that look oem.
Oh and Rusty i would use TRD speedo but having to convert speed in
head all the time is not fun so only TRD part not getting.
I have beams cluster in my st204 running normally. I swapped out
entire assemblies and took off beams tach circuit board and swapped over
5sfe one just to try out . Took 1 minute to convert board and runs
correctly for 5sfe
Anyone wanting black cluster tach so have correct tach for 3s swap selling
for mega cheap.
wow you got alot for just a front clip how much did this all cost you just curiuse to know
Well i have 4500 in clip shipped but that includes over 1200 in parts added. I had room for
more fenders sets and skirts but could not afford to front another 500 for few more fenders
and skirts. One set of fenders is for another 6gc member suprised more guys didnt set up to
get fenders .
Funny i only paid 4100 for entire St205 but time dropped in driveway had around 6800 in it.
no sorry I was refering to the frame that goes around the guage cluster
I would so run the beams cluster in the st205, the boost gauge is practically useless anyways...
I'm interested in that tach. Pm'd.
Here is a sneak peak of something i wanted to do on ST205..i hated added on look of SS-3 splitters
on ST205 bumper ..Its hard to explain how i did this but it involves lot measuring and cutting.
Btw these are real splitters and it was lot of careful planning before cutting
Both cars have following now
No smoking jdm ashtray (coin tray)
Complete Recaro confetti interiors
Premuim door panels (will add matching Recaro material)
Hypersports car mats (4 sets)
Projectors and clear sidemarkers
Kouki tails
TRD real rear spoilers
Real SS3 6 pc skirts (205 fronts modded)
Side visors
Rear hatch visors
"clean box" on pass side
Working on Craigslist ST restoration now. Car got interior cleaned,resprayed bare chassis
white, added mint interior panels,97 special Edition seats,
nice thread! goodluck with the swap!
Well the clip i was going to use was sold and is now in another members build thead. I am importing a another container and a white clip i need over next month.
I am also building right now a 3rd white 6th gen (yes i own 3 of same color) which was a beat down ST and was stripped to bare frame the painted and rewired
with all the GT wiring, TRD suspension and cleaned up 5sfe. Pics up when fully completed ( this car will be for sale by summer of 12')
I just got in a Eurou rear wing (thing huge Type R wing) which is like almost as much as TRD wings i have and will be going on ST for now.
St also received projectors,SS-III 6pc skirts,grille,sills, Silent Power exhaust (yes Rusty im toe to toe with you. lol) , jdm tails,hatch visor and rear strut bar.
Plan to install poly bushings once get thru winter. This car also is getting winterized with underbody and wheelwells sealed up right now.
ST was no never supposed to be a project car but recycling GT parts to that car just seemed to make sense.
ive always wanted a white hatch, i like the curren cluster alot! lol
well long over due update
ST beater was stripped to frame and entire car gone over for rust and oil/dirt
All the wiring was pulled and replace with GT wiring.
So far added new "CELICA" marked interior
mint door panels
furbished all interior panels and headliner
new dash
new carpet
rear strut brace and caps
kouki tails
Eurou rear spoiler (found in a remote UK breaking yard )
trd coilovers
twin pistons front brakes
projectors
jdm fenders
jdm kouki bumper
folding mirrors
hks silent power exhaust
rear hatch visor and side visors (not on car yet)
special edition floor mats
TRD short shifter assemby ( found for only $30!!!)
Also picked up a TRD cluster and bezel that has been converted to read in Mph..This will complete interior for ST2O5 TRD trim.
car still needs exterior body work done ..one on right is beams project car.Any part you see is real deal NO FAKE PARTS!!
I couldn't stand to install 5sfe back into this chassis so decide to go cheap and do a 3sge 3rd gen NA swap.
Didn't want to do wiring so after a lot of searching and help from Malpaso i found Stefan in Slovakia
who was parting a Euro spec 3sge Celica .. same as SSII in japan. This means it has LHD engine harness and by
luck he pulled all the wiring from car and engine which i bought, Even has rear fog light harness built into
wiring as well..
So next phase is to prep 3rd gen and restrip car and rewire . I have a HKS header and b-pipe going on motor
so should free up a few hp with full exhaust i have..
Should note this car possibly could be for sale later this year as i don't need 3 white modded Celicas!! More pics later
OK
well time to another mega overdue update..
Somewhere between Slovakia and New York the company
that handles shipping for post offices lost 2nd box with LHD
3sge engine harness.. I just got claim money from Europe
so not too upset.. who knows where box went..
So after that i decided to sell old shell and focus on
what was "Beams" shell. I have all the parts to do a RHD
swap correctly and 3sge so decided to not buy another clip
and use what parts i have. This car will basically be a Beams
looking car but with a 3rd gen 3sge and E56. I was mad at first
having E56 but now glad as it use all the same parts as ST205
for linkage, and mounts.. Decided to do RHD swap as all the
parts look brand new and 0 wiring to solder or extend.
Car will have Super strut with TRD coilovers and because i have
them laying around ST205 brakes.. Have twin pistons as well
but St205 brakes will be great for track days in a lighter car.
I will post pics up soon ..
RHD parts are test fitted and just need to start firewall removal,
Here is the conversion and JDM parts list on this car..
Near new looking 94 3SGE W/ E56 LSD
2001 JDM 3spoke wheel with red leather grips and red stitching (same as SS3 just red grips)
98 Shift knob
98 SILVER interior trim
98 projectors set
98 SS-III F/R splitters (real) and sideskirts
98 tail lights
98 jdm door sills
98 Full Toyota "confetti" Recaro interior F/R (Toyota recaro rails too!)
new jdm rear visor
new jdm side visors
Rear molded trunk mat
Optional Pedal set (like Rusty's)
2 sets brand new hyper sports 5 peice mat set
TRD strut bar
HKS silent power exhaust (like Rusty's)
Wolife 3rd brake light
Oem clear side lights
Real TRD rear spoiler
TRD short shifter
Seat Heater switches for Toasty Recaros
Clean box
English and Japanese Owners manuals
JDM oem Keyless entry
2 speaker door panels
Converted mph gauge cluster
gunmetal celica emblems
5zigen wheels with 245/40r18s
RHD Parts
Complete firewall
pedal set
complete dash and all parts under it
mint cond 98 jdm carpet which is different material than US cars.
jdm fenders
ss3 abs
super strut suspension ,hubs and steering rack
e brake (rhd)
trunk and gas lid release with cables
rhd dead pedal
complete doors (from SS3) with folding mirrors and harnesses intact and same color ..yeah!!
RHD wiring (complete car)
wiper arms and cowl
Firewall cut out and final prep before welding in new wall
Progress!!!
Mini update
Car ready to install new firewall and rad support.
Have white jdm doors to install as well.
Test fit dash,etc.
3 spoke red /black steering wheel is from a RS200 Altezza
Car looks so aggressive with 245/40R18s and handled
amazing before I tore down car. Still have real SS-III kit to install
as well
Hands down one of my favorite threads. You've always got the coolest stuff. I'm very jealous
bump c'mon show us more of that rare jdmness!
Bump
Finally home this week after 10 years. Looks nice in pics but lot of restoration work ahead
Fires right up every time and amazingly the JDM gas is 10 years old but no issues
Tires haven't lost any air in 10 years and that was before it was shipped
205 will be stripped to shell and every inch of car will be gone over to preserve it
to like new condition and avoid any rust even though never going to see snow again .
This a weekend fun car so no rush to drive and for me part of fun is restoration .
When i got gas kid working at station goes "sweet supra"!!!! LOL
Bought as a 30 B-day present to myself and now here i am 40 next
year so it will be 40th B-day present to myself .
Oh also anyone interested in 3 spokes and near rally spec jdm winter tires
PM me .
http://s448.photobucket.com/user/rtech95/media/st205-2_zps6920acf8.jpg.html
http://s448.photobucket.com/user/rtech95/media/st205_zps51805ea0.jpeg.html
No getting here was the easiest part
Life got in the way
Women, Money, Career , House all
got in the way, sometimes all at once !!
Plus i kept buying other "projects" and not
focusing on 205
I have so many requests for that shifter
Will let you know .
Well no exciting ST205 updates but big news is i added another RHD toy to the stable
White 1998 MR2 Hardtop (Beams) w/ 45K miles shipped from SE Asia in a crate 13' Long . 6ft wide x 5ft tall
Cost was 5800 total including car cost to my door if your curious .
Both 205 and 98 have identical Recaro confetti interiors, TRD steering wheels,Optional JDM Toyota Pedal kits and even similar floor mats
Beams will be going into my White 94 MR2 which already looks like a 98 .
98 then will be getting 2GR with TRD supercharger and Evora close ratio 6spd which i sourced from OZ and UK
If i didn't have all of these toys the ST205 be 100% done long ago !!!
Pics up soon
I'm pretty jealous.
Any updated and pics on the projects? I've been a member for a while. I spend most of my time on Alltrac.net as member and Moderator. But will be posting here more often as I have a few ST20X chassis cars as well, that I will be working on.
Any progress on the Toys ?
Edited
i mean damn i bumped this back in august 2012. your just now showing up wtf!! well good to hear your back... which reminds me, is coomer still alive...
you sold the 3sge engine with E56 trans and hks full exhaust system to my friend here in Los Angeles. Does that mean the SS-III conversion car is in the junkyard now??
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)