Printable Version of Topic

Click here to view this topic in its original format

6G Celicas Forums _ My Project _ EndWorks ST205 GT-FOUR

Posted by: The_enD Jul 16, 2015 - 3:06 AM

So, few months back I got a GT-FOUR. White, of course tongue.gif
This is how it all started.



Current looks.


Blitz Nur Spec R exhaust system
OEM BOV vented to air
HKS Intake
HKS Turbo timer
Depo Racing EBC

BC Racing Coilovers
Whiteline Rear Adjustable Anti-roll bar
TRD brake discs

LHD converted Kouki Projector headlights with 55W 6k HIDs
WRC rear spoiler
Euro front splitters
OEM sideskirts
EndWorks GT-FOUR grille
WRC front hood

MOMO Race steering wheel
EndWorks stainlees steel door sills

Posted by: CelicaDICE Jul 16, 2015 - 5:02 PM

Very nice! thumbsup.gif Do you have plans on keeping the GT-Four hood black? Or are you going to paint it to match with the color of your car?

Posted by: The_enD Jul 16, 2015 - 6:15 PM

Been debating on it, but I'm pretty set on making it white.

Posted by: 4-eyed-freek Jul 16, 2015 - 6:22 PM

TRD rotors in the front?

Posted by: The_enD Jul 16, 2015 - 6:36 PM

Yes. I've edited the first post with most of the stuff.
I still have to mount the BC coils. And while am at it doing the timing belt and water pump. Then boosting it up to 1.1

Posted by: gezgt4 Oct 16, 2015 - 2:45 PM

Is this my old GT4 reg N138 LAG?? Looks very different to how to how I sold it back in 2012 to a chap in Wales who kept in for about a year then it was on ebay around 18 months later. Would love to see updated pictures.





Posted by: The_enD Oct 19, 2015 - 3:05 PM

QUOTE (gezgt4 @ Oct 16, 2015 - 10:45 PM) *
Is this my old GT4 reg N138 LAG?? Looks very different to how to how I sold it back in 2012 to a chap in Wales who kept in for about a year then it was on ebay around 18 months later. Would love to see updated pictures.

Yep, seems that's your old car. smile.gif
I'll have a few new pictures soon hopefully. I want to take some while rolling.

Posted by: The_enD Oct 30, 2015 - 3:29 AM

Painted the front hood white, put on the euro splitters, crystal turns, lowered on BC coils.






Posted by: Nial Oct 30, 2015 - 11:22 AM

Looks much better. Not a fan of black bonnets on non black cars.

Posted by: jesse09 Oct 30, 2015 - 12:04 PM

Looks good. Those splitters add a lot for being so small

Posted by: The_enD Oct 30, 2015 - 1:19 PM

QUOTE (Nial @ Oct 30, 2015 - 6:22 PM) *
Looks much better. Not a fan of black bonnets on non black cars.

It looked good, but it is much better now.

QUOTE (jesse09 @ Oct 30, 2015 - 7:04 PM) *
Looks good. Those splitters add a lot for being so small

They sure do. Ultimately I will replace them with a c-one lip tho.

Posted by: The_enD Nov 28, 2015 - 3:43 AM

Have always wanted a picture rolling in the rain.


Posted by: The_enD Dec 25, 2015 - 5:08 AM

EndWorks custom bezel with pods (long pods, matte paint, white rim, tinted quarter plexi)
Multicolor LED converted TRD 300 cluster, red needles
All done by me






















Posted by: The_enD Apr 24, 2016 - 2:41 AM

My baby was off the road for a few weeks while I tackle with some repairs.
New stainless steel pistons with cooling
New dust seals + holders
New piston seals
New pads
New stainless steel pad bolts
New paint in Candy Apple Red
New anti rattle springs and pad spacers
5.1 Toyota Brake fluid







Candy apple red calipers















Posted by: The_enD Apr 24, 2016 - 3:03 AM

Changed the oil + filter
Fuel filter
Thermostat
A few seals




Posted by: CelicaDICE Apr 29, 2016 - 11:06 PM

Nice color choice! That color makes your ST205 Brake Caliper stand out! They look fantastic! thumbsup.gif

Posted by: The_enD Apr 30, 2016 - 2:28 AM

Thanks, Dice. smile.gif


Posted by: The_enD Jul 9, 2016 - 6:16 AM

Haven't updated in a while..
Modified my projectors with color changing led demon eyes

https://www.youtube.com/watch?v=WCUF3P9QFus



Got the wheels painted as they were badly plagued by corrosion





Sand blasted



Chose to spray silver once again





And had a bad turbo leak, because the seal was put very badly. Had it since I had the car, but it got worse few days ago.
Seal replaced and seems to be running just fine now.





Next I am planning on is side mirrors with LED turn signals, LED puddle lights and heated glass. Then shave off the fender turn signals and paint the fenders, TRD rear spats and TRD skirts. And wheels spacers for the rear. Also got some gauges for water and oil temp, so will be making a dash holder for them.

Posted by: njccmd2002 Jul 13, 2016 - 6:28 AM

Nice. I like the led demon eyes

Posted by: cellocinema Jul 18, 2016 - 7:13 AM

looks nice. like to know about installing led kit. a bit worried about heat affecting the unit. what kind of led product did you use? it's awesome, especially wifi controlled.

Posted by: The_enD Jul 18, 2016 - 7:22 AM

I bought 5 meters of 5050 SMD LED strip and cut from it whatever is needed to my projects. It doesn't produce a lot of heat, few years with no problems.

Posted by: dudeofchaos Jul 29, 2016 - 8:31 PM

Sweet cluster. What LEDs did you use?

Posted by: The_enD Jul 30, 2016 - 3:27 AM

I have literally replied above your post. biggrin.gif

Except for the needles where I use 3528 led

Posted by: dudeofchaos Jul 30, 2016 - 4:30 AM

QUOTE (The_enD @ Jul 30, 2016 - 4:27 AM) *
I have literally replied above your post. biggrin.gif

Except for the needles where I use 3528 led


I literally read every single post but that one lmao, silly me.
Thanks though! It really looks stunning. Looking towards something similar for my cluster.

Posted by: The_enD Oct 23, 2016 - 4:41 AM

First time at the track






Quality time with a mate of mine and his Skyline


All four new discs, yellow stuff pads for the front, poly engine mounts, SPEC stage 2 clutch kit



Stainless steel brake pad shim kit (I also sell these) to remove most of the squealing.


Left at Toyota to change the clutch

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)