6G Celicas Forums

Welcome Guest ( Log In | Register )

5 Pages V  « < 3 4 5  
Reply to this topicStart new topic
> Upgraded Suspension Bushings, front control arm and rear trailing/adjustment arm bushings
post Jul 13, 2011 - 12:02 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




Anyone?


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Jul 13, 2011 - 12:09 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




The ones I've done they all just went right back in just as they came out.


--------------------
post Jul 13, 2011 - 4:20 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




Great haha.
Does that mean the my subframe is stripped?
The bolt appears to be fine.


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Feb 26, 2012 - 1:52 PM
+Quote Post
zeus83

Enthusiast
*
Joined Sep 13, '08
From Kuala Lumpur, Malaysia
Currently Offline

Reputation: 0 (0%)




anyone tried replacing the front SS bushes...i guess there are 2 of them...

my ST205 swap feels damn spongy at hight speeds and corners kindasad.gif
post Aug 11, 2015 - 9:33 AM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




Has anyone had issues with these wearing out fairly quickly?
I installed min July 2011 (by the looks of of it, from my posts in this thread) and last night discovered that on the driver side wheel, the bushing towards the back of the car has quite a bit of play, and is causing a huge clunking noise. You can actually see the wheel move forward and back within the wheel well while accelerating and stopping, and I can recreate the sound/movement by simply shaking the wheel front to back with my hands, with the cars weight on the wheels. And I'm pretty frustrated that these are worn already.

When I replaced them, I torched out the existing bushing (leaving the ring inside the arm) and brought it to a mechanic to press in the new bushing. I'm not sure if the ring was left in the arm, or taken out, but from the looks of it, everyone that's done these bushings have taken the ring out. I also did NOT use the OEM crush tube within the bushing as Tigawoods did, but it seems no one else did either. Could either of these two things cause extra movement in the arm or per-mature wear? Or were the bushings just installed wrong? Right now it seems the rear bushing is the only one moving, but I've yet to put the car in the air and inspect closer.

I did a quick visual inspection, and the bushing appears to be intact, and not cracked or torn, so I'm a little confused as to why this would be causing noise after about 3.5-4 summers of regular driving and no track use. Any insight would be great, as I'd like to avoid replacing these bushings again. And if they do need replacing already, I will probably be going back to OEM which, IIRC, cost about 500 CDN, and not something I'd really like to do either.


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 11, 2015 - 4:39 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




If you can move the arm/bushing then the bolt isn't tight enough.

We've had bushings in our Celicas for years without issue.

Where is it hitting exactly ?
Is the hole (for the long 19mm head bolt) elongated ? Does it tighten enough to keep the arm in place ?


--------------------
post Aug 12, 2015 - 8:29 AM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




QUOTE (Batman722 @ Aug 11, 2015 - 5:39 PM) *
If you can move the arm/bushing then the bolt isn't tight enough.

We've had bushings in our Celicas for years without issue.

Where is it hitting exactly ?
Is the hole (for the long 19mm head bolt) elongated ? Does it tighten enough to keep the arm in place ?

Its the bolt towards the back of the car, that goes vertically, perpendicular to the ground.
It seems almost as if there is play between the inner sleeve of the bushing and the bolt that goes through there (hopefully that makes sense), allowing the arm to move forward and back slightly.
I haven't had a chance to take a closer look to see if the hole is elongated since the problem got worse about a week ago. The car came off the road on Monday, as I didn't want to risk farther damage, but the arm was still where it should be, with the slight forward/backward movement.

Tonight I'm going to tear into it and see what I can find.


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 12, 2015 - 11:46 AM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Those bushings have never even looked right in my car. Neither set. I'll get pictures when I get home. It's either my limited slip going out or those bushings that have been causing serious front end issues for me for the last few years.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Aug 12, 2015 - 1:00 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




QUOTE (richee3 @ Aug 12, 2015 - 12:46 PM) *
Those bushings have never even looked right in my car. Neither set. I'll get pictures when I get home. It's either my limited slip going out or those bushings that have been causing serious front end issues for me for the last few years.

I've kind of always thought the same thing. They didn't really seem to seat right in the LCA, or the pocket (Rear bushing) where the control arm mounts. But since I had someone else press them in, I thought that's how they should look.
Ill be tearing into my car tonight, hopefully, and Ill get pictures when I do so.

This post has been edited by jordisonjr: Aug 12, 2015 - 1:01 PM


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 12, 2015 - 2:30 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Sounds exactly like mine. Like the control arm sits on a downward angle and the bushing sits perfectly straight up and down with the bolt. I started having torque steer and bump steer issues shortly after I installed my first set of bushings. Dustin and Stef found my issue, which was a broken nut inside the subframe which had allowed the horizontal bolt on the passenger side to loosen slightly and let the control arm wiggle around. I cut my subframe open and got the nut and bolt tightened but the problem continued. Dustin thought the bolt had worn the hole in the subframe but everything looked great when I took it apart. Nonetheless, I got a new subframe, control arms, and bushings. My problem continues, exactly the same as before. I still have a popping noise when I first start rolling and it still torque steers. At this point, either my LSD is worn out and causing my issues or I coincidentally got two sets of bushings that ruined my car. I'm leaning towards the diff right now but it's funny that you bring this up because I have a popping noise similar to yours and I don't like the look of the rear bushings at all.

Literally everything else in my front end has been replaced. Motor mounts, steering rack, end links, ball joints, subframe, control arms, bushings, bearings, brakes, axles, everything. The trans/diff have stayed the same so it's either the poly bushings or the diff causing my issues.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Aug 12, 2015 - 2:36 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




QUOTE (richee3 @ Aug 12, 2015 - 3:30 PM) *
Sounds exactly like mine. Like the control arm sits on a downward angle and the bushing sits perfectly straight up and down with the bolt. I started having torque steer and bump steer issues shortly after I installed my first set of bushings. Dustin and Stef found my issue, which was a broken nut inside the subframe which had allowed the horizontal bolt on the passenger side to loosen slightly and let the control arm wiggle around. I cut my subframe open and got the nut and bolt tightened but the problem continued. Dustin thought the bolt had worn the hole in the subframe but everything looked great when I took it apart. Nonetheless, I got a new subframe, control arms, and bushings. My problem continues, exactly the same as before. I still have a popping noise when I first start rolling and it still torque steers. At this point, either my LSD is worn out and causing my issues or I coincidentally got two sets of bushings that ruined my car. I'm leaning towards the diff right now but it's funny that you bring this up because I have a popping noise similar to yours and I don't like the look of the rear bushings at all.

That sounds like how my bushing sits as well, and as far as I can remember, that's how it looked right from the start. My popping has evolved into the whole arm moving. The rear "branch" of the LCA seems to be the culprit. Because with the car on the ground, e brake on, if I push the front wheel forward and back, I can recreate the "popping" sound, which i can see is the rear "branch" of the LCA moving with in its bracket on the chassis, almost pivoting around the front two bushings of the LCA

And now that I think about it, my car does tend to pull every which way upon acceleration, but I always thought that was caused by having wider wheels, and the ruts in the road pulling the car. Maybe this could be related.

This post has been edited by jordisonjr: Aug 12, 2015 - 2:38 PM


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 12, 2015 - 2:51 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




I'm working on getting a replacement S54 but now you have me doubting whether that's the issue or whether we are having the same issue.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Aug 12, 2015 - 4:12 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




Sorry man, Ill be sure to keep this thread updated with my findings.


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 12, 2015 - 5:30 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




One thing I noticed on other bushings I've put in is the metal sleeve that goes inside the bushing (that the bolt goes through) is sometimes a bit too long.
On my 7 gen I shaved the end of it on my grinding wheel so the sleeve didn't stick out further than the bushing itself.
FYI.


--------------------
post Aug 12, 2015 - 7:38 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




It's actually sitting kind of decent right now but it normally looks a little worse than this.




--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Aug 13, 2015 - 8:35 AM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




That's almost exactly how mine looks as well, but I wasn't able to capture it very well.
This is what mine look like with the car on the ground: (Not the greatest shots but this was what I was able to get)



And then once the car is in the air, and wheel off:



So I was fully planning ot be laying under the car all night yesturday, but Batmans comment got me thinking:
QUOTE (Batman722 @ Aug 11, 2015 - 5:39 PM) *
If you can move the arm/bushing then the bolt isn't tight enough.
Does it tighten enough to keep the arm in place ?


So the first thing I checked was if the bolt going through the bushing vertically into the chassis was tight enough. Sure enough, it was fairly loose, ~50 Ft Lbs or so. So I tightened it up to around 80 ft. lbs. and dropped the car back down.

Tried shaking the wheel back and fourth with my hands, which caused a pretty hefty clunk/movement in the arm before, and no movement or noise.
So I went for a drive, accelerating pretty hard and stopping pretty hard, and no noise yet. I stopped extremely hard once to try and re create the noise, and there was a small pop, which I think was the LCA re-seating to where it should be, because it only happened once, and hasn't yet happened again after testing.

So I drove the car to work this morning, and it seems to have solved the issue. I'm not completely convinced that this was the only problem, but I'm going to continue driving it for now and hope for the best. I'll keep this thread updated in a week or so if this is the solution, or if the issue comes back.

This post has been edited by jordisonjr: Aug 13, 2015 - 8:36 AM


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Jan 21, 2021 - 6:06 AM
+Quote Post
chacha

Enthusiast
*****
Joined Dec 29, '05
From So-Cal
Currently Offline

Reputation: 12 (100%)




Sorry to bring up and old post, but need clarification. Bringing this thread up, I'm confused, did anyone put the crush tube oem in or use the thicker ones TCB UK make or the one BRD makes sold on BRD or GT4-Play? Can I install without using the crush tube into the metal sleeves of the polyurethane mounts?

5 Pages V  « < 3 4 5
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 12:57 PM