6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> E153 in AT200 ST
post Sep 13, 2019 - 9:08 PM
+Quote Post
SaulGoodman

Enthusiast

Joined Aug 5, '19
From Florida
Currently Offline

Reputation: 0 (0%)




Starting this thread as a side-off of the 2gr swap topic. Simple as the title goes, mounting diagrams, posts, how-to's, etc on the GT S54 / ST C56 / Camry E153. Of course itll be a manual swap, stock clutch and flywheel (unless there are better junkyard options)
post Sep 14, 2019 - 6:12 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




nothing needed other than the correct mounts and brackets for the LH (Transmission) side and 205 shifter cables. 205 mount and bracket on the rear.
all the work for any "S" series engine (or 2gr for that matter ) will be on the RH frame rail.(by "all the work" i mean drill 2 holes)


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Sep 14, 2019 - 12:23 PM
+Quote Post
SaulGoodman

Enthusiast

Joined Aug 5, '19
From Florida
Currently Offline

Reputation: 0 (0%)




QUOTE (presure2 @ Sep 14, 2019 - 6:12 AM) *
nothing needed other than the correct mounts and brackets for the LH (Transmission) side and 205 shifter cables. 205 mount and bracket on the rear.
all the work for any "S" series engine (or 2gr for that matter ) will be on the RH frame rail.(by "all the work" i mean drill 2 holes)



Oh no kidding? Thats for specifically an e/s into an AT200?

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 10:29 AM