The above pics just showing what this project is for, thats not the exact product.
Will use the stock headlight glasses to do a Mould and produce with Machinery.
The lenses material would pretty much like the plastic of the tail lights.
Crystal clear plastic.
Gonna be 2 colors to choose from:
Crystal Clear or Light Smoked
The cost would be usd$100 for all 4 with packing, but shipping would be on top depending on different countries, but since the weight is nothing, so the shipping gonna be cheap.
You might query about why I suddenly have lots of project to launch.
Since I just found another 6GC enthusiast who is willing to support me some funds for my projects.
However, your support is also required!!!
Just Put your name down if you want those, I would make it happen!!
I'm in...
1. Enrique
I would like another set of lenses just in cause I got to change mine out
1. Enrique
2.RA65_22RE
Good luck with that, I'm about to retire, lol...
1. Enrique
2.RA65_22RE
3.D0w0rks0n
Im definetely down for this!!
How will the lightly smoked lenses look? I might also get a set of these
i need those!!!
wow, i'm interested.
stupid question. are these street legal?
nice one vince! im down for this!
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
Will these clear lenses change the way my factory headlights perform? Cause I can't afford to do the projector install.
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
Vince... you are unbelievable .
Hell yea i've been looking forever for some clears
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
What time frame are you looking at having these done? So i can know when to have the money ready
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
AND ME TOO-celicabob I would love to get them.......
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
7. celicabob
8. Luka
9. ej8ferio702
10. robertof30
im n for a set
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
7. celicabob
8. Luka
9. ej8ferio702
10. robertof30
11. Dragondog
12. petna
I'm in also.
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
7. celicabob
8. Luka
9. ej8ferio702
10. robertof30
11. Dragondog
12. petna
13. Uriel
i would be down if i could only pick up the highs have something in mind for the lows already
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5.foxcraze
6. Imper
7. celicabob
8. Luka
9. ej8ferio702
10. robertof30
11. Dragondog
12. petna
13. Uriel
14. twolownissan2002/ highs only if possible
what kind of bulbs will use the new one set? the same like old - 9005 and 9006?
cheers
gotta take my name off the list i dont have projectors and wont have the money to do them any time soon no need for the clear lenses i guess.
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
pm me when u can get a set for me
A friend of me wants to sell his pair of those clear lenses.
Send me a PM for his email!
(He lives in the Netherlands too)
any news on that Vince?
Can you show a picture of its quality and maybe one of the smoked version?
cheers Joerg
I am interested if you still are willing to ship them out thanks
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
[quote name='chacha' date='May 5, 2009 - 1:49 PM' post='772164']
Just clarifying that it would be like the stock lights so the old bulbs should work right the 9006 and 9005
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
any news on this vince? Are they going to be with a E-Stamp and numbers (look like road legal)?
If you could add these numbers that would be great!
vincent_doggy--I'm confused...do these work on a usdm left hand drive st, or for gt or projector beams only?
Man, you are the only person creating things for the celica left and right. Haha. Props man.
any news on these lenses vince?
x2 V_D i think Rayme stopped making
If additional interest is needed to get this going, count me in too.
I'm in. What would the smoked one look like? are they actually legal? (doesnt rlly matter alot of my car is illegal, just curious)
Hey dude im down for the lenses to i want the clear ones so count me in and let me no when u start selling them
still available?
Im definatly down for these!
Need one set so far.
Form Bay Area, California
I'm down.
Is there more pics?
I'm in for a whole set. Clear!
Vincent you're the Shiznit!! If Shannon hadn't put hers up for sale I would be getting a pair of these, Thanks for all you do for us at 6gc, we appreciate it! BUMP for a great seller
Could you post a pic of what the light smoked might look like?
im so down for this also!!!
down for sure! looks as good as projectors but cheaper :x :']
Hey vincent, I'm interested a set of clear
By the way, how hard is this to install? I've never taken off only the lenses.
PS: I'm really loving that clear black gas lid. Kudos bud, and keep up the amazing work. I'm sure we ALL appreciate the support.
i'm interested, do they come with fitting instructions?
Easiest was would be a steam oven 5 Minutes at about 120°C. Then it is like tearing of a chewing gum of your headlamps
VInce give us an update about this. (I think he is not watching this topic)
I am watching... but seems the supplier for the clear/smoked gas lid not gonna cater for us this time.
Need 4 mould instead... it s gonna be... $ + $ + $ + $....
I am sourcing some Acrylic company instead... working on it... need more patience this time...
bumping an old thread but is there any update on these?
im in if these are being made again...
one bump, in high hopes of a protective acrylic covers for teh jdm projectors?
bump! hope this project is still in the works! count me in for a set.
bump!!!!!! i want to make a set of projectors for less then $600
bump x3!!!
i would also buy some clear lenses, im working on custom headlights right now
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
16.Marinos
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
16.Marinos
17. illneversellmycelli
18. Celicaracer97
i wonder if this project is still going???
Still sourcing the way to make those at a reasonable price~
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
16.Marinos
17. illneversellmycelli
18. Celicaracer97
19. v1becelica
I'll keep my fingers crossed!
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
16.Marinos
17. illneversellmycelli
18. Celicaracer97
19. v1becelica
20. Nemises
vincent just a random question, have you thought of using a vacuume forming proccess to make these lenses?...seems like vaccume forming is cheaper then injection molding. might disassemble my headlights and give it a shot just to see if it can be done and look good..
finding good material is sorta the tough part my best guess would be some kind of uv coated lexan...but that is pricy..ill just be doing a trial run using just normal plexiglass as its fairly cheap and if it fails atleast i tried. im sure better results from vacu-forming can be had by having a custom mold made just for the purpose vacu-forming...but im guessing most automotive plastics used in lenses have some sort of chemicals added to make the plastic have certain characteristics...we will see just have more important stuff to work on with my celli right now such as painting my front end!, good luck vincent and hopefully when they get produced ill buy some then(not putting my name on the list yet)
[quote name='vincent_doggy' date='Feb 23, 2009 - 6:45 AM' post='756621']
[color="#800080"][size=3]The above pics just showing what this project is for, thats not the exact product.
Will use the stock headlight glasses to do a Mould and produce with Machinery.
The lenses material would pretty much like the plastic of the tail lights.
Crystal clear plastic.
Gonna be 2 colors to choose from:
Crystal Clear or Light Smoked
The cost would be usd$100 for all 4 with packing, but shipping would be on top depending on different countries, but since the weight is nothing, so the shipping gonna be cheap.
You might query about why I suddenly have lots of project to launch.
Since I just found another 6GC enthusiast who is willing to support me some funds for my projects.
However, your support is also required!!!
Just Put your name down if you want those, I would make it happen!!"bnoksky" crystal clear
21. WHATxTHExTIFF
a badly need some clear since i install my angel eye
1. Enrique
2.RA65_22RE
3.D0w0rks0n
4.YCM
5. Imper
6. celicabob
7. Luka
8. ej8ferio702
9. robertof30
10. Dragondog
11. petna
12. Uriel
13. twolownissan2002/ highs only if possible
14.chacha
15. Mcsteamy
16.Marinos
17. illneversellmycelli
18. Celicaracer97
19. v1becelica
20. Nemises
21. Needles
Is this still in the works Vince?
wow this is old... i wonder what the final outcome was??
me to : What happen????
they sell these on andyautosport in clear and tint. like the facotry ones according to the members who posted a discussion on facebook 3 months ago. but no one has an actual picture of what the product looks like.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)