6G Celicas Forums

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> DarkDeath Celica Build [GEN4 3SGTE SWAPPED], Documenting my GEN4 swap and build
post Oct 20, 2016 - 7:51 PM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)






This is mainly a thread to document my GEN4 3SGTE swap and build! I feel there is still a lack of information and assured potential of this engine and feel just posting about my progress about my build may be useful in some form, so I decided to finally start a build thread about my celica!



So basically in a nutshell, the 6th gen celica has always been my favorite car. I bought this car from another member a few years back and ever since then, have been taking care and upgrading it slowly. Over here in Toronto, Ontario Canada (specifcally Downtown Toronto and surrounding areas) , with the many years I have had a celica, I noticed there are very few of them left (literally have only seen a handful) and alot of people don't know about the potential and capability these cars have. So I've been trying to keep the dream alive over here ever since! tongue.gif

Also the car's name is "ENDER" due to me growing up playing Initial D Arcade Stage and my CELICA GTFOUR's card name was "ENDER" biggrin.gif



I personally like my car's clean, so I try to keep things modest. I've won a few Celica of the months over here and have greatly appreciated it!

Here's the current list of what's on my car:

Visual Mods:
GT4 Exterior Conversion (Bumper, Riser Blocks, Hood)
TRD Style Side Skirts
C-One Lip
Custom Celica Dragon Rainguard (ThE_EnD)
Aftermarket Crystal Clear Fog Lights, side markers and front markers
JDM Headlights (6000k HID) and Tail Lights
Spree LED interior (blue) w/ Sony Double Din + Amp + Sub combo
Repainted in "Crystal Black Silica" (Pearlescent Black) Toyota/Scion/Subaru FRS(FT86/GT86)/BRZ Colour

Wheels:
18x9 TE37 Style custom "magnesium blue" painted rims
20mm Spacers (rear) 5mm (front)
225/40/18 stretched Nankangs

Performance:
TEIN Lowering Springs
Aftermarket Header
Moog Endlinks
Injen Cold Air Intake
Magnaflow Exhaust

So after a few years, it was finally possible to be able to evolve my celica from a 5s to 3s biggrin.gif



Anyways, now for the main stuff laugh.gif . So why did I choose the GEN4 3SGTE? Well a few reasons, I feel the GEN4 fits my needs better (bottom end power, street car) and since I personally wanted to stay LHD and I'm engine swapping I should take advantage of swapping in other Gen's instead of gen3. with the only 15 year rule in Canada you can attain RHD ST205's here fairly easily and for reasonable value, So I thought if I wanted a Gen3 I can just drive one of those. Lastly, I want to be part of building up of information about the GEN4. I believe it's a great engine with hidden potentials.

So, onto the build!

Once I've decided I wanted to go GEN4, I looked for a mechanic that was capable of swapping it. I literally searched the depths of the internet for a Toronto based mechanic if anyone has swapped in a GEN4 to no avail. The only mechanics I've bumped into only swap in GEN2 or GEN3 into our cars. So as I was about to give up, even starting to search for GEN3 front clips, I decided to spread out my search to mechanics who have done 2JZ swaps. To my amazement, because of this I found a mechanic who swaps in GEN4 3sgtes and SPECIFICALLY prefers them too! So after discussing with him and wanting to swap, he notified me that he purchased a few Manual Caldina Front Clips and will be on there way at the beginning of fall. So I basically purchased one and bought things along the way to prepare. Note that I know that you don't need a front clip for this engine to swap into our car but it's nice to know that it shows the exact mileage of this engine and the price wasn't too far off in comparison to a engine,ecu,harness.

So, after a few months, my front clip has just arrived last week!







Proof of it being a Manual Caldina



114k on the engine!



It was interesting to know that it was a Manual Caldina too, I've been told they only come in Automatic. This one is completely stock and apparently the timing belt was changed at 97k (according to the timing belt cover). I also wanted to find what exactly I can take from this clip (other then the obvious) that works on our cars, so far all I know is the brake calipers are shared with the st202 so I'm able to swap those with mines. So I'll be doing that as well, if anyone else has any ideas or suggestions let me know! I literally don't know what else to take from this front clip

Here's a video of us starting it up:

https://www.youtube.com/watch?v=T7R1i51FojM


Now for the list of things I have bought already that will be installed at the same time:

BEAMS S54 w/LSD



I was amazed he had this separately, usually it's always that you'd had to buy a beams to get this. I didn't get the e153 because he did not have one and I couldn't find one (with or without LSD). so I believed upgrading my S54 to one with LSD wasn't half bad right?

Authentic 3" HKS Hi-Power Ti Muffler



I really liked the sound of this muffler and with HKS supporting the fwd celica back in the day was a plus too! this is just a universal set up cause obviously there is no pre made one I can buy.

Authentic HKS SSQV4 BOV



Again same reason (you may notice a trend of HKS biggrin.gif)

Authentic 3" HKS Intake Filter



again this is only the filter because I need to make a custom one.

ACT Lightweight Flywheel



Purchased from PrimeMR2 since they do GEN4 swaps regularly.

Southbend S54 Clutch kit Stage 2




Also purchased from PrimeMR2 since they do GEN4 swaps regularly.

Walbro 255 fuel Pump



Researched that I needed to upgrade my fuel pump with this one, so bought one.

Megan Racing 7th Gen short shifter




These work with our cars and finding a TRD short shifter kit was next to impossible and stupidly priced, so the next best thing.

The things not pictured that I also purchased were the Hose from hell, purple fin option for the ssqv and poly motor mount inserts from kikosaurus

______



The things that the mechanic will be installing and purchasing are:

- changing all the gaskets, hoses, sparkplugs, fuel filter etc
- potentially new timing belt and tensioner
- new water pump
- 3" custom turbo back exhaust w/high flow cat to my HKS hi power
- 3" custom Intake piping
- 3" custom downpipe (I didn't buy the one from primemr2 since my frontclip comes with a downpipe and he can fabricate a new one from it)
- Front Mount Intercooler with custom piping
- Manual Boost Controller (I will be getting an electric one next year, so just grabbing this for now)


So there's alot of extra stuff going onto the car other then the engine so I'm excited to see where I really stand after this car is up and running!

I'm dropping my car off this weekend and it will be done in a month minimum so during that time I'll try my best to document as many things as I can!


~DarkDeath

This post has been edited by DarkDeath: Jan 24, 2017 - 6:47 PM


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Oct 20, 2016 - 8:26 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Good stuff so far!


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Oct 20, 2016 - 8:44 PM
+Quote Post
ClevelandGaint



Enthusiast
***
Joined Feb 12, '13
From Cleveland
Currently Offline

Reputation: 5 (100%)




It's always great to see these swaps. Beautiful lift back by the way, very interested in the updates to come
post Oct 20, 2016 - 8:51 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Nice to see people making really nice Celicas, they're still my favourite front wheeler and some day I'll have another just cause. Look forward to seeing it progress during the swap.


--------------------
2001 Miata LS 5-speed
post Oct 21, 2016 - 8:47 AM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




This swap will finish this car off nicely! Always liked your car. If you don't mind me asking, what's your estimated cost once its all said and done?

This post has been edited by jordisonjr: Oct 21, 2016 - 8:47 AM


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Oct 21, 2016 - 7:37 PM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




Its gonna cost him lotsa money


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post Oct 22, 2016 - 9:02 AM
+Quote Post
4-eyed-freek



Enthusiast
****
Joined Apr 17, '10
From U.P. michigan GO STATE
Currently Offline

Reputation: 3 (100%)




Awesome! best of luck!


--------------------
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.

Celica: The name is derived from the Spanish word for "heavenly" or "celestial".
Back-2-Back July COTM 15&16
post Oct 23, 2016 - 8:40 PM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)




Thanks everyone! Definitely excited knowing that my car will never be the same again haha.

QUOTE (jordisonjr @ Oct 21, 2016 - 9:47 AM) *
This swap will finish this car off nicely! Always liked your car. If you don't mind me asking, what's your estimated cost once its all said and done?


Basically It was around the same quote I got when I asked PrimeMR2 a few months back about the swap (I seriously was going to drive down there to get my swap haha) at around $6.5k (US Dollars) but then I bought a bunch of other things so basically it should be around 7-7.2k.

Also just dropped it off on the weekend:



and there is also a whole Caldina there too!



~DarkDeath

This post has been edited by DarkDeath: Oct 23, 2016 - 8:43 PM


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Nov 16, 2016 - 11:13 AM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)




Quick Update, removing my old engine and removing the gen4 from the clip:

Old 5SFE:






Gen4 3sgte Frontclip removal:



Bonus: That's a 1JZ-GTE swapped S14 in the back biggrin.gif

~DarkDeath

This post has been edited by DarkDeath: Nov 16, 2016 - 11:14 AM


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Nov 16, 2016 - 2:01 PM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




Id like to do a Gen 4 swap to compare it yo Amy's Gen 3. If anyone in So Cal is thinking about it, Ill do it for half labor Id usually charge for an engine swap


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Nov 16, 2016 - 9:27 PM
+Quote Post
HardHead93

Enthusiast
**
Joined Apr 7, '15
From New Mexico
Currently Offline

Reputation: 0 (0%)




Awesome! Nice to see another person doing a Gen 4 swap. I tried the 5sfte and failed so now I am doing a gen 4 swap. I am almost done and should hopefully be firing it up this weekend. Here is the thread on my swap:
http://www.6gc.net/forums/index.php?showto...p;#entry1086532
post Dec 13, 2016 - 12:31 PM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)




Back with a few more updates, trucking along nicely!

Changed all of the gaskets and little tidbits, water pump, timing belt / Timing belt tensioner and removed the T-VIS so I have the same boost all around.


Hose from Hell Replaced:


Valve Cover Painted Blue:


Engine fitted into the engine bay, didn't realize how low slung it'll be!


New front and back motor mounts with Kikosaurus Poly Motor Mount Inserts:


Just received my intercooler: Vibrant Performance, good for 550hp!





So this week, my mechanic will be doing all of the wiring. Then the following week is all custom piping fitting then the short shifter, caldina brake upgrade and many other things!

ETA is at the new year, too excited!

QUOTE (HardHead93 @ Nov 16, 2016 - 9:27 PM) *
Awesome! Nice to see another person doing a Gen 4 swap. I tried the 5sfte and failed so now I am doing a gen 4 swap. I am almost done and should hopefully be firing it up this weekend. Here is the thread on my swap:
http://www.6gc.net/forums/index.php?showto...p;#entry1086532


Yeah, my old 5SFE was actually a swapped JDM 98+ Camry 5SFE so it had low mileage. I was considering 5SFTE but ultimately I wanted the 3SGTE as it was my goal engine at the end of the day. I'm excited for both us and definitely will keep track of your build as well!

Cheers!

This post has been edited by DarkDeath: Dec 13, 2016 - 12:33 PM


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Jan 12, 2017 - 11:18 AM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)




Happy New Years everyone! More progression into 2017!

So the engine runs, the wiring is done and we're just doing all of the custom performance bits!

First off is the intercooler fitting:





HKS BOV Placement:



One thing I'm definitely excited about is: He made a custom true cold air intake!



Here's how it looks like under:



After this is done, we're doing the fuel pump and Custom exhaust!

~DarkDeath


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Jan 12, 2017 - 12:47 PM
+Quote Post
Wild202



Enthusiast
*
Joined Jan 10, '17
From Russia, Izhevsk
Currently Offline

Reputation: 0 (0%)




With the air filter, the turbine will become expendable.


--------------------
Email - vad07@inbox.ru
post Jan 12, 2017 - 8:03 PM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




really nice


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)
post Jan 13, 2017 - 11:49 AM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




Take a few extra minutes and set that turbo up proper.

Clock your turbo so the outlet points down and get your piping away from running all over your exhaust manifold.
post Jan 23, 2017 - 3:08 PM
+Quote Post
DarkDeath



Enthusiast
*
Joined Feb 6, '13
From Toronto, Canada
Currently Offline

Reputation: 3 (100%)




QUOTE (Wild202 @ Jan 12, 2017 - 1:47 PM) *
With the air filter, the turbine will become expendable.


I'm changing it every few oil changes so it won't brittle down, we also have a air bypass valve planned incase of water

QUOTE (playr158 @ Jan 13, 2017 - 12:49 PM) *
Take a few extra minutes and set that turbo up proper.

Clock your turbo so the outlet points down and get your piping away from running all over your exhaust manifold.


We were thinking about that but since I've kept my air condition, it got in the way of everything, so we just routed it accordingly.

BIG UPDATE!:

255 Walbro Fuel pump installed


3" Custom Downpipe


3" Custom turbo back exhaust w/ high flow cat


3" to 4.5" tip HKS Hi Power Ti Muffler


but the big news MY CAR IS DONE!


Right now we're just running stock boost, will be raising it later this month. Right now it's just stored because of winter but drove it around and man it's great! Feels real nice, just atm I get a random engine light come on when I'm boosting on the highway but doesn't seem to effect anything, will be checking with the mechanic when I stop by there next month. Along with the rest of my gauges and uppin the boost!

Here's a clip of my exhaust:
https://www.instagram.com/p/BPmP5FqDEPf/?ta...elica&hl=en

~DarkDeath

This post has been edited by DarkDeath: Jan 23, 2017 - 3:08 PM


--------------------

September 2014 & July 2015 Celica of the Month
1995 Toyota "EnDeR" Celica GTS-T Gen4 3sgte swapped
[Instagram: @Ender_Celica]
post Jan 23, 2017 - 3:42 PM
+Quote Post
Csober



Enthusiast
*
Joined Jun 16, '16
From Lansing, Mi
Currently Offline

Reputation: 1 (100%)




Wow! Absolutely love it! Great work, nice and clean. I cant stand when people don't have there piping welded. 6 couplers on one charger pipe just looks silly haha.


--------------------
Technician @ Airlift Performance
*1993 Mitsubishi Eclipse GST*1992 Eagle Talon TSI
*1991 Toyota Celica GT*1998 Mitsubishi Eclipse GST
*1993 Toyota Celica GTS*1991 Nissan 300zx TT
*2006 Mitsubishi Evolution 9 563/403*1994 Toyota Celica GT ST205 rep.
*1995 Toyota Corolla (Beater
)
-2008 Honda Fit Sport (daily)
-1991 Nissan 300zx tt 632/520
post Jan 23, 2017 - 3:48 PM
+Quote Post
cheela



Enthusiast
*****
Joined Feb 2, '07
From Berlin, WI
Currently Offline

Reputation: 18 (100%)




congrats! you're gonna have fun once winter is over. smile.gif


--------------------

*1997 Celica ST - 3SGE Greytop BEAMS
*1977 Celica RA29 - Classic Cruiser
*2005 Matrix AWD - dedded but still hanging around like a ghost
2019 Rav4 XLE Premium - Sports mode is fun.
post Jan 23, 2017 - 4:03 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Car looks great, doesn't sound bad either for a 4 cylinder. tongue.gif Also I agree on A/C being more important than turbo clocking, but A/C is everything to me. laugh.gif

My brother's 2.0T Genesis sounds pretty good too, I've decided turbos are the secret to making a four cylinder sound good.


--------------------
2001 Miata LS 5-speed

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 9:13 AM