Printable Version of Topic

Click here to view this topic in its original format

6G Celicas Forums _ My Project _ Chanassa's Celica "Kirby"

Posted by: Chanassa Nov 26, 2013 - 12:10 PM

Member name: Chanassa
Market: EUDM
Year: 1997
Model: ST
Frame & Type(optional): ST20
Engine: factory > swapped. 7A-FE (Factory)
transmission: Stock

Significant other mods:
Plastidipped white

Performance
Past:
- Stock

Present:
- Stock

Future:
- Thinking about a swap, not sure what to do or how.

Suspension
Past:
- Stock

Present:
- Changed due to a leak in front right hand side

Future:
- Lowering springs(?)

Exterior
Past:
- Black and worn

Present:
- Matte White plastidip
- Black summer rims with red toyota stickers
- Red Toyota stickers over direction light in the front.
- Darkened taillights

Future:
- 6gc.net decal
- Red wheel knobs
- TRD decals
- Red Calipers with celica decals
- Black or carbon backplate
- Black or carbon mirrors
- Red mudflaps with TRD decals
- All red or JDM tails
- Black Winterrims

Interior
Past:
- Stock

Present:
- Matte white Plastidip midconsole and other details
- New head unit with red lighting

Future:
- LED interior lights
- Red or white LED instrumentpanel
- More white details
- Racing front seats or leather seats with heating
- Momo or similar steeringwheel
- Change out all speakers
- Soundproofing

Posted by: The_enD Nov 26, 2013 - 1:03 PM

Go around project builds on here and get some ideas for yours.

Posted by: Chanassa May 13, 2015 - 5:32 AM

It's almost two years since my last post here, things have been slow on the project side of things and I haven't done a lot.

The car have however gone from Black to matt white, I will post this progress below:

1.
http://pho.to/9M4EV
2.
http://pho.to/9M4IG
3.
http://pho.to/9M4K5
4.
http://pho.to/9M4N7

I'm not 100% sure where to go from here so if you want, please give me feedback and suggestions! smile.gif

Posted by: Chanassa May 13, 2015 - 7:40 AM

I just ordered some red TOYOTA stickers for the rims, some TRD stickers and some "for sport" stickers from ebay. The car is a little too white, and I need some more details for it to be nicer. I also have ordered some carbon vinyl stickers, and thinking of putting this in the side mirrors to get some black in there. Not sure if this will look nice, but it's cheep on ebay so doesn't hurt to much.

The area near the back plate is also an area i'm thinking of making black, but i'm not quite sure just yet. If you got some tips, please come with them.

Posted by: supremeparadox May 13, 2015 - 9:47 AM

why not put a design on the back plate area like PegGTS has
http://www.6gc.net/celicas/1994-gt-14753

or buy riser blocks for the spoiler. i think The_enD might have some for sale but if not check the buying/selling board.

Posted by: mkernz22 May 14, 2015 - 12:45 AM

Definitely do black mirrors and I think you should also do the hood spoiler black too. It'll be nice subtle things to help break up all the white

Posted by: The_enD May 14, 2015 - 2:51 AM

Yes, on black side mirrors, it looks great on a lot of colors.
No to the front spoiler, it will get lost being black, leave it white.

Posted by: Chanassa May 14, 2015 - 4:08 AM

The side mirrors are getting Black as soon as possible.
I also have an universal hood scoop air intake on the way, thinking this maybe is an good way to break up the hood a little bit. The hood intake can also go on the roof.

Posted by: mkernz22 May 14, 2015 - 3:09 PM

QUOTE (Chanassa @ May 14, 2015 - 5:08 AM) *
I also have an universal hood scoop air intake on the way, thinking this maybe is an good way to break up the hood a little bit. The hood intake can also go on the roof.





Posted by: Chanassa May 14, 2015 - 3:50 PM

QUOTE (mkernz22 @ May 14, 2015 - 3:09 PM) *
QUOTE (Chanassa @ May 14, 2015 - 5:08 AM) *
I also have an universal hood scoop air intake on the way, thinking this maybe is an good way to break up the hood a little bit. The hood intake can also go on the roof.





I understand that you dont agree, but I really would want your reason for this? Does it mest up the lines of the var or something or is it just that this is something you just dont do to our beloved cars?

Posted by: Chanassa May 14, 2015 - 3:56 PM

QUOTE (supremeparadox @ May 13, 2015 - 10:47 AM) *
why not put a design on the back plate area like PegGTS has
http://www.6gc.net/celicas/1994-gt-14753

or buy riser blocks for the spoiler. i think The_enD might have some for sale but if not check the buying/selling board.


Hmm, that looked really good. Do you know how he made that back plate?
I will see about those rising blocks, thanks man 😊

Posted by: mkernz22 May 14, 2015 - 9:27 PM

Its it going to be something that is functional or one of those stick on ones? Cause the stick on ones are just completely ugly on any car and most people will laugh at it too (trying to save you from that)

Posted by: Chanassa May 15, 2015 - 3:54 AM

QUOTE (mkernz22 @ May 14, 2015 - 9:27 PM) *
Its it going to be something that is functional or one of those stick on ones? Cause the stick on ones are just completely ugly on any car and most people will laugh at it too (trying to save you from that)


It is one of those stick on ones. I will not put it on the, thank you for saying me.

Posted by: mkernz22 May 15, 2015 - 6:40 AM

I'm not trying to be a jerk or anything, just looking out for you smile.gif

Posted by: Chanassa May 15, 2015 - 12:14 PM

QUOTE (mkernz22 @ May 15, 2015 - 6:40 AM) *
I'm not trying to be a jerk or anything, just looking out for you smile.gif


Thats just perfect, thank you very much sir.

Posted by: Chanassa May 15, 2015 - 12:28 PM

So i managed to get some work done today aswell. The plan was to make my taillights darker, and also take the back plate. For this job I figured I wanted to try the black smoke PlastiDIP.

For the lights this was perfect and the result came out very good (In my opinion at least), but I'm not that sure about the back plate. I think it looks like I have started to paint it black and then just stopped or something. What do you guys think?

http://pho.to/9N6ax

PS: The trunk support is not function. I got a new one on the way, thats the reason for the plank.

Posted by: The_enD May 15, 2015 - 1:35 PM

You need paint for the back plate. wink.gif

Posted by: Chanassa May 15, 2015 - 1:42 PM

QUOTE (The_enD @ May 15, 2015 - 1:35 PM) *
You need paint for the back plate. wink.gif


😞😞

Posted by: The_enD May 15, 2015 - 1:45 PM

Also, you can't just have the riser blocks, they won't fit to your existing spoiler.

Posted by: Chanassa May 16, 2015 - 10:07 AM

Today my decals for the rim arrived! Yey.


Posted by: Chanassa May 16, 2015 - 3:10 PM

So i got my decals on, look close to perfect.

Pic series:
http://pho.to/9NNYI

Posted by: Chanassa May 21, 2015 - 4:39 AM

First post is updated with more information on whats done and what plans I have in mind.

Posted by: Chanassa May 24, 2015 - 11:25 AM

So, the weekend is close to an end, and with the rain pouring down I decided to put the tools down for today. As for this weekend things did go a little slow, but i got some work done.



I will post the pictures below, please come with feedback as I'm getting closer to the end with the exterior. I will get new licensplates in about 2-3 weeks.


Pictures of the progress:
http://pho.to/9PCUF

Bonus, 2 of our race cars.
http://pho.to/9PCd7

Posted by: Chanassa May 28, 2015 - 4:12 AM

So I recived the red light for the door fram The_End yesterday! It's good to finally be able to put this in.




I also got the other stickers I was waiting on, the TRD Racing Development, 6GC.net and some others. I will just upload the pictures below.










Posted by: rave2n May 28, 2015 - 10:39 AM

Love those wheel decals

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)