As the tile says, I'm No longer Parting out the car. I decided to keep it and drop a 7A back in it and just sell it off.
Sorry for any confusions, or hopes that you guys might have wanted or needed.
The body is still in great condition and parting it would be too much of a waste for a great body.
Full Version: FS: 95 ST Part out or Whole Car (DELETE ME)
QUOTE(soulshadow @ Jun 1, 2007 - 10:03 PM) [snapback]564024[/snapback]
So I'm Underway in making my AE92 my project car and I no longer have any need for the Celica. (So long my friend). The 20V has been removed and all that is left now is the shell with two axels holding the wheels in place
This is what I have and If I can find enough buyers I might just part out the car unless someone wants to take it from my hands for $1600. Small dent on drivers side fixed it with bondo. No major dents. Perfect for SWAP!
- Head Lights = $100 for all 4 or $50 for low or High. Low beams come with SliverStars. Or both Bulbs for $20
- Front Rotors Cross Drilled and Slotted w/ Ceramic Pads Best u can get less than 500 miles on both = $80
- Motor Mounts $25 each Front, rear, tranny, pass or all 4 for $90
- Calipers for front $35 each
- E-Brake handle- $30
- "A" series shifter cables $50
- Dropzone Springs $50
- KYB Struts complete 150 Or Strut and springs complete $190
- Steering wheel $50
- Air Bag from Steering Wheel $125
- Driver Door Electric $125
- Pass Door Electric $125
- Pass Air Bag $125
- Glove Box $40
- Fenders $30 Each
- Hatch with Window $200
- Hood $35
- Cruise Control Module $40 or if u want a complete set, $150 to make P/S
- Ignition lock and Cylinder $50 comes with keys
- Brake Cylinder Master $50
- Clutch pedal and conversion for Manual $150, Comes with pedal, and reservior complete swap!!!!
- 17" Enki RSF-2 rims set with new tires Low Pro $600, lug nuts inc.
- Interior parts here and there PM for pricing.
- Alternator $30
- P/S $40
- Fuel Pump $30
- Seats and all other stuff that is not listed just PM me
This is a full car that needs to go. Its a 5-spd More Pictures upon request.
Located in Lincoln, AR 72744.
are these the prices shipped or pre shipping? also do you still have the spoiler off it? if you do can i get it from you? thanks
also what kind of wear are on the fron rotors and pads? i may just grab those from you as well
please post some pics
thanks
if the lights are in good condition i dibs them!!!! but i need to see some pictures. Im also really interested in the front roders and the pads. Pics as well please. If you part out whole car, i need the driver side rear quarter window. Let me know what you cna do. THanks
pmed
and i call 2nd dibs on the headlight
and i call 2nd dibs on the headlight
pm'ed also dibs on the trims...interior trims where the deck and shifting boot is and just the trim that holds the window motor in place....
These are all just prices without shipping. Thats going to be an Add+ depending where you guys live.
I will post up some pictures this week as soon as I can get too it. (Moms in hospital)
I will post up some pictures this week as soon as I can get too it. (Moms in hospital)
pm'ed
Is the interior black?
I would need your front fender and door on the passenger side and the whole dash shipped to Montreal Canada.
Lemme know
I would need your front fender and door on the passenger side and the whole dash shipped to Montreal Canada.
Lemme know
will the dropzone springs fit a gt?
if so dibs
if so dibs
Please whoever wants whatever, PM me so I can keep track on who asks for what your dibs is the time you PM me. IF someone else asks for it first I will put u down as 2nd, etc.
nvm
dibs on struts and springs
sent you a PM 
waiting a reply about front brake rotors and pads and stock spoiler.
Pictures Pictures Pictures
56K AVOID!!!!
The Back, Spoiler in top shape for a hatch, tail lights in good shape too.
----------------------------------
These are the back struts sorry there not out yet! KYB with DropZone springs all around
---------------------------------------
OEM '95 Air-Bag undeployed yet!
------------------------------------
My Gauges A/F, Water Temp, Oil all with the POD and wiring.
---------------
Driver Trim
-------------------
PASS TRIM
------------------
HEADLIGHTS
(Water got into the High beam on the Drivers side needs a little cleaning then its good again)
---------------------
BRAKE PADS
-----------------------------------
56K AVOID!!!!
The Back, Spoiler in top shape for a hatch, tail lights in good shape too.
----------------------------------
These are the back struts sorry there not out yet! KYB with DropZone springs all around
---------------------------------------
OEM '95 Air-Bag undeployed yet!
------------------------------------
My Gauges A/F, Water Temp, Oil all with the POD and wiring.
---------------
Driver Trim
-------------------
PASS TRIM
------------------
HEADLIGHTS
(Water got into the High beam on the Drivers side needs a little cleaning then its good again)
---------------------
BRAKE PADS
-----------------------------------
The Car has been sitting for the last 1/2 year so its collected some rust from the rotors. I drove them around for less than 1K miles on the pad and rotors
So I know they aren't worn. They do greatly increase breaking power!
So I know they aren't worn. They do greatly increase breaking power!
Ok Guys, I got all who wanted certain parts, but I'M not about to cut up the car yet. Im still hoping someone would buy it off my hands so I Wouldn't have to do it. But if it Doesn't sell I will gut it this coming week.
I will PM you guys with further information for those who wanted certain parts.
I will PM you guys with further information for those who wanted certain parts.
ok if u do decide to part out your car....if its still intact, i want the manual conversion parts....does it comes with everything needed for the manual swap minus teh tranny, clutch, flywheel, etc etc...???? check here for dr.tweaks auto/manual checklist...
http://www.6gc.net/forums/index.php?showtopic=30415
http://www.6gc.net/forums/index.php?showtopic=30415
under plastics and passenger side plastic for sale?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.