Help - Search - Members - Calendar
Full Version: Rusty's SS-II progress thread
6G Celicas Forums > 6th Generation Celica > My Project
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Rusty
This is my Celica progress thread






1996 ST202 SSII 3S-GE Celica

and a little info about it on what's been done
HKS Pod filter + Short intake
TRD spark plug leads
Denso Iriduim spark plugs
Toyota KYB Gas shocks
Lowering Springs
Tom's Racing Pedal set (came with car)
Alpine Headunit (ipod connection)
Clarion 6.5" speakers
Clarion 6.5" speakers
other than that I've kept clean and shiny



the parts are in Japan and will take 6-8 weeks via ship to reach me
I'll post pics (and the prices) as I recieve parts
3SGTE
looks like some good things going on there rusty, any engine pics of intake etc? any plans for big rims or jdm projectors?
Rusty
lol, there might be
3SGTE
haha a celica of mystery!! my bad.... just realised your signature has pic of engine and intake!! lol

Im sure you will keep us all updated mate
Rusty
well apart from the "mystery parts" i'm going to add
intake pipeing cold airbox, I hope
a new boot for the gear stick
& lights...for the clusters and ignition ring


Parts are hopefully on there way and get here late august?
Rusty
22 more days till they arrive into the country biggrin.gif

also now got new 205 directionals instead of 195 mixed

UPDATED PIC of tyres


Yay only 15 days till they arrive I'm going to be nice here and give you some info


Note this is the total for each part (I dont pay for shipping or feight to may place biggrin.gif )

White TRD Cap
$48 + GST EACH (why not I'm buying stuff for my celica?)

QUOTE
$55 + EACH

$40 + EACH

$450 + gst EACH

$125 + EACH

$305 + gst EACH
$305 + gst EACH

$165 + each
$165 + each

$325 + each
$325 + each

sub total $2,308

GST $288.50

Total $2,596.50
delusionz
Post a picture of your TOM`S racing pedals. Ps, I can rig up a blue ignition ring for you if you want, I have 2 spare clear rings, Toyota stopped putting them in Celicas after 1995, What I did was take a splice from the cigarette lighter power and run some wire through the dash plastics.
Rusty

notice all 4 biggrin.gif(clutch brake accelerator & foot rest)

QUOTE
I can rig up a blue ignition ring for you if you want ... Toyota stopped putting them in Celicas after 1995, What I did was take a splice from the cigarette lighter power and run some wire through the dash plastics

I dunno I might just put a new bulb in (since its not working at the moment)
delusionz
I think your ignition ring plastic might be black with no transparent bit....

Here's the difference, 1996 on the left, 1995 on the right:


PS. When I looked at my pedals closer it had some stupid chinese on the top and levin(???????) on the bottom, definitely not TOM`S ... Eww.
Rusty
QUOTE
When I looked at my pedals closer it had some stupid chinese on the top and levin(???????) on the bottom, definitely not TOM`S ... Eww.
oh well... biggrin.gif
is that part hard to take out... gosh I'm going to be busy on my hoilday wink.gif

BIG NEWS>>>> all Parts have finally reached Toyota NZ (for )

and I'll will get them to arrive 25 August Just after I get back from Aussie
Rusty
YES!!! PARTS are at my place (except one is missing so i contacted TNZ), but im not there im in aussie tongue.gif
Rusty
YES I Have all parts(for STAGE 1 lol) here are some pictures
















Whats that?????

biggrin.gif biggrin.gif







pictures missing SS-III Badge, Red FRONT SS-III Spiltters, SS-III Grille & TRD Cap

will post prices shorty
stetsonaw
can't believe i haven't posted here yet. great to see your car coming along so well man. how much all those brand new parts set you back?
delusionz
Sweet!!!!!!

those TRD strut braces look very sturdy, I envy ur projectors, wouldnt mind the grill and badge either... ur so many steps ahead of me now hehe
MercuryFree
That reminds me, I still need to put in my clear highs haha. Damn front bumper being such a pain to take off and put on again.

Nice bar. I am rather jealous smile.gif
Rusty
QUOTE
SSIII Front grille
53114-20101 SEA-FRIEGHT NZD $61.00 = USD $43

SS-III badge
75311-20480 SEA-FRIEGHT NZD $45.00 = USD $31.00
TRD strut brace

53607-ST001 NZD $506.00 = USD $352.00

GT-4 Rear strut brace
53605-20020 SEA-FRIEGHT NZD $140.00 = USD $97.50

Projector Low Beam
RH: 81012-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
LH: 81014-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
Low beam Total NZD $686.00 =USD $478.00

Projector High Beam
RH: 81170-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
LH: 81130-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
High Beam Total NZD $370.00 = USD $258.00

Low & High Lights Total NZD $1056.00 = USD $736.00

SS-III Front Splitters
RH: 76851-20060-D0 SEA-FREIGHT NZD $365.00 = USD $254.00
LH: 76852-20050-D0 SEA-FREIGHT NZD $365.00 = USD $254.00

White TRD Cap
08298-SP077 NZD $54 = USD $37.60

Total NZD $2,596.50 = USD $1,809.60

those projectors are cheaper than cheap (a guy here sells them for USD $850, which is suppose to be very cheap) smile.gif, but still quite alot to spend

I got up at 6am this morning just to look the the front strutbrace laugh.gif


and then later on I'll get the side skirts and rear splitters tongue.gif
Rusty

lights in thumbsup.gif used SS-III connectors biggrin.gif


oh yea. I wont put the front splitters in right now or else it will look front heavy kindasad.gif
delusionz
wow that looks awesome! biggrin.gif what do u mean by front heavy?

EDIT: Oh you mean wait until you get rear splitters aswell?
Rusty
yup rear splitters and side skirts
gt_driFFter
Did you order those splitters pre-painted or something? Projectors are the best exterior mod someone can do!
LastOfTheSTs
Rusty I'm loving the car, it's looking awesome!

95_gt
wow those projectors look so cool! i want to get some for mine! is there a website were i can order these?
Rusty
QUOTE
Did you order those splitters pre-painted or something?

Yup sure did used this thread here with all the part names and numbers (then added my colour codes at the end)
http://www.6gc.net/forums/index.php?showtopic=39945

QUOTE
Rusty I'm loving the car, it's looking awesome!

thanks, still got a bit to do, then it will look even better thumbsup.gif

QUOTE
wow those projectors look so cool! i want to get some for mine! is there a website were i can order these?

yup, Im loving the projectors heaps, looks good during the day even better at night time, just that cut off and the beams pointing out smile.gif
go through your local Toyota dealer or see the FS threads here. I went through toyota NZ- straight importing from Japan Toyota/ TRD Japan I got discounnted price and free shipping from japan to my house smile.gif
Rusty
QUOTE
Rear Strut brace covers
TO-6434220160-CO x2 Price unknown

SS-III Side Skirts
RH: 76911-20900
LH: 76912-20900 $185 +GST = $208
TOTAL $416

SS-III Rear Splitters
RH: 76893-20130-D0
LH: 76894-20110-D0 $325+ GST = $365
TOTAL $ 731

Gear Stick Boot
58808-20120-C0 $69 +GST = $77

TRD Gear Stick
33504-SP003 $131 + GST = $147

(*Prices in $NZD GST= 12.5%)

Part numbers are correct I hope

so these are the next stuff I'm getting, I've got to start saving & in a couple of weeks, will place an order for these.
just wondering on the side skirts they cant be pre-painted can they? 76911-20900 -DO?
and anyone know the price for the rear end Strut brace covers
stetsonaw
where did you get the side indicators and how much? whatthe was wondering.
Rusty
trademe (NZs version of Ebay)
$NZD 40ish (came wth new amber bulbs)

well according to the SS-III thread here the side skirts aren't painted, but i'll check when I oder them
delusionz
Hey Andy, I ordered the same indicators from trademe, turns out the guy I went to pick them up from has a shop full of them right around the corner from my house, PM me if you decide you'd like a pair of them and I'll be your middle man.
Rusty
just waiting to hear back from my supplier for prices then a 5-6 week wait till they arrive wink.gif
Rusty
right time for an update. depsoiting money on friday then another 5-6 week wait, so around X mas time they should arrive...sweet
delusionz
holly crap oem bodykits are expensive!!!!!!!!

$ 731 for rear splitters... damn toyota.... their prices are so overrated even my ss3 doesn't have its own kit haha

wonder what TRD splitters would cost
parriehunter
Damn that is ridiculous alright.

There is a guy selling them on TM;

http://www.trademe.co.nz/Trade-Me-Motors/C...n-183020448.htm

http://www.trademe.co.nz/Trade-Me-Motors/C...n-183020450.htm

Alot cheaper just have to get them painted. dont know how well they will fit tho.
Rusty
haha you have to know the right people smile.gif
that Tradme kit looks like a SS-II kit like you have parriehunter

QUOTE (Prices in NZD)
GT-Four Rear Strut brace covers
64333-20160-C0 (x2) $50.625

SS-III Side Skirts
RH: 76911-20900-D0 $180
LH: 76912-20900-D0 $180

SS-III Rear Splitters
RH: 76893-20130-D0 $393.75
LH: 76894-20110-D0 $393.75

Gear Stick Boot
58808-20120-C0 $77

TRD Gear Knob
33504-SP003 $95.625


Total $1370.75

these prices are slightly more expensive on someof them, because the last person I delt with left frown.gif
parriehunter
The SSII isnt good enough??? hahaha j/j

If he doesn't want to spend over $700 for SSIII ones. Whats the difference? cant say i have seen them side by side. I just thought the front was different.
delusionz
The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).
Rusty
haha actually saw a curren today with the kit, but looked like it was the standard kit (because it was an oldy driving) also notice how many more curren and celica's are in my area now. THERES HEEAPS!

the SS-III run longer and are thiner, were as the SS-II one is shorter and fatter. (both front and rear)

QUOTE
The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).
Ah what have you got a pic of them? TRD ones
parriehunter
QUOTE (Rusty @ Oct 25, 2008 - 7:26 PM) *
haha actually saw a curren today with the kit, but looked like it was the standard kit (because it was an oldy driving) also notice how many more curren and celica's are in my area now. THERES HEEAPS!

the SS-III run longer and are thiner, were as the SS-II one is shorter and fatter. (both front and rear)

QUOTE
The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).
Ah what have you got a pic of them? TRD ones


Thats right I remember the SSIII ones now. smile.gif.
Aint the TRD ones the same as the SSII? man i must seem like a noob.
delusionz
TRD kit:



notice the trademe kit has similar style to TRD in the rear and sides but not front:
Rusty
hmm I dont like the hieght on the side skirts, prefer SS-III ones


...
... ...
parriehunter
Yea I saw it. pretty crazy. I dont like the way it looks tho. would be cool if it looked stock. ulitmate sleeper.

I like the height of the side skirts.
delusionz
Yeah it's quite ghetto, the boost gets you laid sticker, the podgy girl sitting in the passenger seat, the tacky blue seat covers, painted steering wheel, dodgily placed trd sticker and the path of the intake plumbing paints a nice picture of the owner.. lol
parriehunter
Haha. ghetto. it sure does paint a picture. she must be one lazy girl. couldn't be arsed moving out of the car for the photos. I think the seats are actually blue. but yea could look better.
Rusty
...
parriehunter
Haha, that dude is angry. What a noob.
Rusty
MAN I CAN'T WAIT

I've still got about 4 weeks left till parts arrive.
TRDGT4
update if any?

Rusty
Of course...

ok so I contacted my supplier about my parts arriving from Japan, and I can expect them wait for it...... 24th December, so I get a merry xmas this year biggrin.gif also got a guy who can paint my side skirts and install them (hes very good, so I can expect a top job thumbsup.gif). and the splitters are easy install (aswell as the other things) then finishing it off with an trd oil change biggrin.gif...I cant wait


so we are looking about mid january finish biggrin.gif

YEAH CELICA SS-II.V
coneyre
Fairplay Rusty, the car looks animal thumbsup.gif
coneyre
QUOTE (Rusty @ Aug 26, 2008 - 3:49 PM) *
QUOTE
SSIII Front grille
53114-20101 SEA-FRIEGHT NZD $61.00 = USD $43

SS-III badge
75311-20480 SEA-FRIEGHT NZD $45.00 = USD $31.00
TRD strut brace

53607-ST001 NZD $506.00 = USD $352.00

GT-4 Rear strut brace
53605-20020 SEA-FRIEGHT NZD $140.00 = USD $97.50

Projector Low Beam
RH: 81012-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
LH: 81014-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
Low beam Total NZD $686.00 =USD $478.00

Projector High Beam
RH: 81170-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
LH: 81130-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
High Beam Total NZD $370.00 = USD $258.00

Low & High Lights Total NZD $1056.00 = USD $736.00

SS-III Front Splitters
RH: 76851-20060-D0 SEA-FREIGHT NZD $365.00 = USD $254.00
LH: 76852-20050-D0 SEA-FREIGHT NZD $365.00 = USD $254.00

White TRD Cap
08298-SP077 NZD $54 = USD $37.60

Total NZD $2,596.50 = USD $1,809.60

those projectors are cheaper than cheap (a guy here sells them for USD $850, which is suppose to be very cheap) smile.gif, but still quite alot to spend

I got up at 6am this morning just to look the the front strutbrace laugh.gif


and then later on I'll get the side skirts and rear splitters tongue.gif


Rusty I see you paid $1056 for the hight and low beam projetors. Is that the full price? does that include shipping?

Rusty
and thats in NZ dollars remember that. Yup thats all I paid for them as for shipping, it was FREE right to my door step biggrin.gif and they arrived at my place in just 2 days after entering the country.
kezza-q
QUOTE (Rusty @ Dec 4, 2008 - 2:21 PM) *
and thats in NZ dollars remember that. Yup thats all I paid for them as for shipping, it was FREE right to my door step biggrin.gif and they arrived at my place in just 2 days after entering the country.



I looked into Projectors, CPA in Wellington offered me a set for $880 brand new, NZD, I thought that sounded like a lot at the time. Bad call...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2018 Invision Power Services, Inc.