Help - Search - Members - Calendar
Full Version: Sept 14th - Green BEANS meet - Berlin, WI
6G Celicas Forums > 6th Generation Celica > Meet/Event Discussion
Pages: 1, 2
cheela
Y'all wanna have a meet at my house, help me finish the BEANS swap and enjoy food and Celicas?


DATE: September 14, 2019

LOCATION: N8510 County Road VV, Berlin WI
*Look for a big ol' radio tower once you're close. Get directly underneath it and you'll be there.
*I'll probably by flying a Toyota flag with the celis hanging out too so it'll be hard to miss.

FOOD: pork butt or ribs and egg rolls

WHO'S ALL COMING:
1 - Enderswift - confirmed
2 - Zeen - confirmed
3 - Bitter - maybe
4 - NetsToy - confirmed
5 - Richee3 - confirmed?
6 -
Box
Depends, what kind of beans will be there? I'm fond of the jelly kind myself.
enderswift
I'd be down for the 14th. What are we trying to accomplish with the celica? Is it still not starting? Cuz I can bring my wiring diagrams and such
navseal345
Would be down for later in September.
punkxrckprincess
😣
No free weekends for us until October 19th
richee3
Y u far away?
cheela
I can provide jelly beans if needed Box.

Luke, we're still checking for no start. Daniel sent me his extra harness so I was midway through swapping it to see if my harness was the issue. Wiring diagrams would definitely help. Everything else should be good but a fresh pair of eyes is always welcome to check things over.

Devin, how late? 14th late enough?

Sam, frown.gif heard about your guy's trouble too. Hopefully you can have it fixed and back up soon. Where are you guys right now?

Daniel, You are the one that's far away. come back!!! tongue.gif
punkxrckprincess
Home. AAA towed it back. Tearing into it tomorrow. Just no Dragon
navseal345
I lied... sorry. Ran out of PTO at work.
That97celica
I can make it just gatta know by this month to request the day off
CoolZeen
im good for sept 14 or oct 12,19 and 28.
CoolZeen
So is lookings like sept 14 or oct 19 . is up to you Cheela. time is running.
cheela
Sept 14th sounds like it works. The sooner the better.
Bitter
Woot!
Bitter
So uh how big of a hammer do I need to bring with? We're going at this Clarkson style, right?
NetsToy
I'm down for a Green Beans meet! smile.gif

Sounds fun!
cheela
QUOTE (Bitter @ Aug 24, 2019 - 11:54 AM) *
So uh how big of a hammer do I need to bring with? We're going at this Clarkson style, right?


laugh.gif depends how angry and frustrated I get.

QUOTE (NetsToy @ Aug 24, 2019 - 9:51 PM) *
I'm down for a Green Beans meet! smile.gif

Sounds fun!


stop on by. You guys are always welcomed at my house.
cheela
updated first post with info.

This correct so far?

WHO'S ALL COMING:
1 - Enderswift
2 - Zeen
3 - Bitter
4 - NetsToy
5 -
6 -
TimeslideZ
Broooo even though I wouldn't be any help I would totally come. But I'm going camping that weekend... ARGGHHH
punkxrckprincess
QUOTE (cheela @ Aug 25, 2019 - 4:43 PM) *
updated first post with info.

This correct so far?

WHO'S ALL COMING:
1 - Enderswift
2 - Zeen
3 - Bitter
4 - NetsToy
5 -
6 -


frown.gif
I truly hope this is what it takes for the Beams to go vroom vroom for you. Sad we won't be there to witness it ourselves!
narly_charley
I can/will provide spiritual support... Get it the f*&^ done! smile.gif
cheela
I hope so as well. Would be nice to have my garage back under control.

And everyone coming is mostly coming for moral support and food more than anything. hahaha.
narly_charley
QUOTE (cheela @ Aug 26, 2019 - 1:35 PM) *
I hope so as well. Would be nice to have my garage back under control.


Everyone shows up and you have enough room for two people in your garage. Hahahaha!
bloodMoney
QUOTE (cheela @ Aug 26, 2019 - 1:35 PM) *
I hope so as well. Would be nice to have my garage back under control.

And everyone coming is mostly coming for moral support and food more than anything. hahaha.


Yea... I don't do so well with that. Just ask Daniel. I have the bad tendency to just take over everything. So probably good that chances are low of us making it.
cheela
QUOTE (bloodMoney @ Aug 26, 2019 - 2:05 PM) *
QUOTE (cheela @ Aug 26, 2019 - 1:35 PM) *
I hope so as well. Would be nice to have my garage back under control.

And everyone coming is mostly coming for moral support and food more than anything. hahaha.


Yea... I don't do so well with that. Just ask Daniel. I have the bad tendency to just take over everything. So probably good that chances are low of us making it.


and that's how he was able to finish his swap. So looks like you should do the same for me too. laugh.gif
We really just wanna see all of you guys if possible. Mai See especially wants to see your babies. haha

QUOTE (narly_charley @ Aug 26, 2019 - 1:49 PM) *
QUOTE (cheela @ Aug 26, 2019 - 1:35 PM) *
I hope so as well. Would be nice to have my garage back under control.


Everyone shows up and you have enough room for two people in your garage. Hahahaha!


umm....... about that....(I better do a bit of cleaning) laugh.gif
bloodMoney
Lmao!

My family was asking if my photographer friends were going to be coming to Theo's 2nd bday.....

I told them that you guys were booked up (as I assume you are), so probably not.

In case you do want to come, it's on the 8th! laugh.gif laugh.gif
Bitter
QUOTE (cheela)
Free photo shoots all in attendance


You heard it here first.
cheela
QUOTE (bloodMoney @ Aug 27, 2019 - 7:06 AM) *
Lmao!

My family was asking if my photographer friends were going to be coming to Theo's 2nd bday.....

I told them that you guys were booked up (as I assume you are), so probably not.

In case you do want to come, it's on the 8th! laugh.gif laugh.gif


aww dang! already been a year huh? We would love to come but yeah it doesn't stop getting busy for us until the end of October I think... we'll wish him a happy birthday from Wisconsin when it's time and we are glad that your family enjoyed having us around (I hope) smile.gif


QUOTE (Bitter @ Aug 27, 2019 - 7:26 AM) *
QUOTE (cheela)
Free photo shoots all in attendance


You heard it here first.


WELL.......... that was kinda always a given. tongue.gif I got lots of empty country roads to perfect some sweet rolling shots. wink.gif wink.gif wink.gif
Bitter
I'm still planning to go up but I need to change my status to "it's complicated" lol. Got a bunch of stuff going on that I'm trying to wrangle at the moment, death of a thousand paper cuts kind of ****.
cheela
QUOTE (Bitter @ Aug 28, 2019 - 9:06 PM) *
I'm still planning to go up but I need to change my status to "it's complicated" lol. Got a bunch of stuff going on that I'm trying to wrangle at the moment, death of a thousand paper cuts kind of ****.


no problem. that's life. Lemme know when it gets closer to the date if you can make it or not.
CoolZeen
up to now im in .been driving it to cruise and shows with my temperature gauge not working.im still working on it .I already change the sensor and the plug but nothing.
cheela
QUOTE (CoolZeen @ Aug 29, 2019 - 10:53 AM) *
up to now im in .been driving it to cruise and shows with my temperature gauge not working.im still working on it .I already change the sensor and the plug but nothing.


Hopefully you're not overheating. Wonder if it's a wiring issue then since you changed both the sensor and plug? Do you have your aftermarket guages hooked up? Is one of them a temp guage?
Box
Not to sound belittling, but there are two temp sensors if I recall correctly. One for the ECU, and one for the gauge. If not that then like CheeLa mentioned I'd look at wiring and grounding, then the gauge itself. It could also be air in the system causing it not to read.
cheela
if you think you can make it to my house too then bring it and we'll fix it there too! laugh.gif
richee3
Put me down as a maybe.
cheela
QUOTE (richee3 @ Aug 30, 2019 - 1:39 PM) *
Put me down as a maybe.

*gasp* no way?!




also

wanted to add there will be a strip show going on as well....

No, I will not be taking off any clothes (unless you pay wink.gif ) but I/we/you will be stripping the blue coupe or what's left of it for any parts you guys wanna buy(on the cheap) before I junk it. panels, wire, plugs, sensors, bolts, nuts etc. all must go. lowest prices around. all sales are final. no refunds. laugh.gif
Bitter
Are you junking it as a car with title or as scrap? Cause cutting a car in half means you don't need a title as a car cut in half isn't technically a car anymore.
enderswift
QUOTE (richee3 @ Aug 30, 2019 - 1:39 PM) *
Put me down as definitely


Fixt
Box
Crazy CheeLa's Cut Cars?

"I'm so crazy I cut them in half, the cars that is!"
cheela
QUOTE (Bitter @ Aug 30, 2019 - 6:50 PM) *
Are you junking it as a car with title or as scrap? Cause cutting a car in half means you don't need a title as a car cut in half isn't technically a car anymore.


I don't have the title anyways so it's going to be scrapped.

QUOTE (enderswift @ Aug 30, 2019 - 7:03 PM) *
QUOTE (richee3 @ Aug 30, 2019 - 1:39 PM) *
Put me down as definitely


Fixt

laugh.gif laugh.gif

QUOTE (Box @ Aug 30, 2019 - 7:26 PM) *
Crazy CheeLa's Cut Cars?

"I'm so crazy I cut them in half, the cars that is!"


I don't have a sawzall but if need be, I can and will get one! laugh.gif
Bitter
That's exactly how my friend got rid of a car they lost the title to. Sawzall that bitch in half because the duplicate title cost more than the car was worth since we'd pulled the engine/trans and some other parts off it. But as scrap steel it was worth enough that they'd come pick it up for free, but as a car they wanted like $100 to come get it without a title.

There's something very fun about cutting a car in half, really lets out a lot of frustrations...
Box
I think it'd be better to do this:
NetsToy
Yay! A stripping party! I usually don't get invited to those! wink.gif Anyway...

I'm excited the blue car is a coupe, that'll bode well for my vert collection.

I'll even bring my screw driver. biggrin.gif

Is there anything else I should bring?! Dollar bills, a sawzall, cookies?!

I'm excited for this! Operation Green Beans, here we go! smile.gif


QUOTE (cheela @ Aug 30, 2019 - 2:49 PM) *
wanted to add there will be a strip show going on as well....

No, I will not be taking off any clothes (unless you pay wink.gif ) but I/we/you will be stripping the blue coupe or what's left of it for any parts you guys wanna buy(on the cheap) before I junk it. panels, wire, plugs, sensors, bolts, nuts etc. all must go. lowest prices around. all sales are final. no refunds. laugh.gif

CoolZeen
QUOTE (Box @ Aug 29, 2019 - 2:48 PM) *
Not to sound belittling, but there are two temp sensors if I recall correctly. One for the ECU, and one for the gauge. If not that then like CheeLa mentioned I'd look at wiring and grounding, then the gauge itself. It could also be air in the system causing it not to read.

I change both of them , the plugs to, and check the wire ,but nothing yet.
CoolZeen
QUOTE (cheela @ Aug 29, 2019 - 11:27 AM) *
QUOTE (CoolZeen @ Aug 29, 2019 - 10:53 AM) *
up to now im in .been driving it to cruise and shows with my temperature gauge not working.im still working on it .I already change the sensor and the plug but nothing.


Hopefully you're not overheating. Wonder if it's a wiring issue then since you changed both the sensor and plug? Do you have your aftermarket guages hooked up? Is one of them a temp guage?


thank God it dont look like is overheating.I dont have a coolant temperature aftermarket gauge. I was thinking on getting one,but i dont want to cut the radiator holes to connect the sensor. Next thing I got to check is the needle of the stock gauge.
CoolZeen
QUOTE (cheela @ Aug 29, 2019 - 3:49 PM) *
if you think you can make it to my house too then bring it and we'll fix it there too! laugh.gif


I was thinking the same, but is to risky taking that chance driving them hours.If not ill go with the daily(His&Hers) that finally just repair the wheel beering , after 3 months is back rolling.
Bitter
Zeen, it may in fact be a faulty gauge, you should be able to check the resistance of the gauge temp sender at the gauge itself to verify it's getting a signal up there. It's not uncommon for older gauge clusters to have failing/failed capacitors which cause incorrect needle positions, if that's the case then replacing the worn part isn't too hard if you can solder and have taken apart clusters before. If you're not experienced then a use working cluster is a safe buy but may be on it's way out too since it's nearly as old (and swapping the speedo/odo isn't hard to do). Some places will repair your own cluster, like Southern Electronics but they're not particularly cheap.
CoolZeen
QUOTE (Bitter @ Sep 2, 2019 - 10:54 AM) *
Zeen, it may in fact be a faulty gauge, you should be able to check the resistance of the gauge temp sender at the gauge itself to verify it's getting a signal up there. It's not uncommon for older gauge clusters to have failing/failed capacitors which cause incorrect needle positions, if that's the case then replacing the worn part isn't too hard if you can solder and have taken apart clusters before. If you're not experienced then a use working cluster is a safe buy but may be on it's way out too since it's nearly as old (and swapping the speedo/odo isn't hard to do). Some places will repair your own cluster, like Southern Electronics but they're not particularly cheap.


yeah im swapping it with another one i have save, to check . I was hoping it was just the sensor, because i have my current one custom and with aftermarket white indiglow .And i did not wanted to go through the work of transffering everything

cheela
QUOTE (NetsToy @ Sep 1, 2019 - 12:46 AM) *
Yay! A stripping party! I usually don't get invited to those! wink.gif Anyway...

I'm excited the blue car is a coupe, that'll bode well for my vert collection.

I'll even bring my screw driver. biggrin.gif

Is there anything else I should bring?! Dollar bills, a sawzall, cookies?!

I'm excited for this! Operation Green Beans, here we go! smile.gif


QUOTE (cheela @ Aug 30, 2019 - 2:49 PM) *
wanted to add there will be a strip show going on as well....

No, I will not be taking off any clothes (unless you pay wink.gif ) but I/we/you will be stripping the blue coupe or what's left of it for any parts you guys wanna buy(on the cheap) before I junk it. panels, wire, plugs, sensors, bolts, nuts etc. all must go. lowest prices around. all sales are final. no refunds. laugh.gif



laugh.gif laugh.gif
screw driver and cookies sound good. lol

QUOTE (CoolZeen @ Sep 2, 2019 - 9:39 AM) *
QUOTE (cheela @ Aug 29, 2019 - 3:49 PM) *
if you think you can make it to my house too then bring it and we'll fix it there too! laugh.gif


I was thinking the same, but is to risky taking that chance driving them hours.If not ill go with the daily(His&Hers) that finally just repair the wheel beering , after 3 months is back rolling.


alright. sounds good. lemme know when it gets closer. and text me the day of if you are. I think you have my number right? if not, PM me. wink.gif
CoolZeen
yeap , I got your #. With one or the other I will be there. the only thing that I can promise is that is going to be color red laugh.gif .
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2020 Invision Power Services, Inc.