-Cleaned up oem power steering fluid $30
20240626_185501 by Justin Towers, on Flickr
20240626_185456 by Justin Towers, on Flickr
20240626_185452 by Justin Towers, on Flickr
20240626_185443 by Justin Towers, on Flickr

-OEM 3SGE Redtop vvt-i exhaust manifold with welds smoothed out and ceramic coated for $400
20240901_173705 by Justin Towers, on Flickr
20240901_173637 by Justin Towers, on Flickr
20240901_173627 by Justin Towers, on Flickr
20240901_173620 by Justin Towers, on Flickr


-RHD steering rack and steering column $200
20240930_203848 by Justin Towers, on Flickr
20240930_203834 by Justin Towers, on Flickr
20240930_203817 by Justin Towers, on Flickr


-SUS304 3SGE Ypipe exhaust flanges $80
20250621_184733 by Justin Towers, on Flickr
20250621_184604 by Justin Towers, on Flickr
20250621_184549 by Justin Towers, on Flickr
20250621_184535 by Justin Towers, on Flickr
20250621_184529 by Justin Towers, on Flickr
20250621_184520 by Justin Towers, on Flickr

-Mild Steel Ceramic Coated 17.5" Test pipe $80
20250622_173754 by Justin Towers, on Flickr
20250622_173744 by Justin Towers, on Flickr
20250622_173330 by Justin Towers, on Flickr
20250622_173258 by Justin Towers, on Flickr

Right JDM Taillight assy (harness not included) $180
20250825_204940 by Justin Towers, on Flickr
20250825_204927 by Justin Towers, on Flickr
20250825_204914 by Justin Towers, on Flickr

bump. buy my stuff!!

bump still got it all. I'd suggest opening the holes on exhaust flanges to 51.5mm as mentioned by an exhaust shop.

Got any TRD springs? Haha. Might be interested in the manifold

no. I want the version 2's. I still believe dealerships have the versions 2 in their inventory's my tanabe df210 are rusting..... i could remove and powder coat but they are over 15 years old....

edit i just called a local dealer and they want around $260ish for them. naw im good

I would need the springs to work with super strut suspension no? Do you have a part number?

https://www.youtube.com/watch?v=mvxi3qYj5Is

no springs are the same design just different stiffnesses due to geometry.

http://www.6gc.net/forums/index.php?showtopic=55103&hl