Return to the how-to article, Installing a Front Sway Bar

View previous photo | View next photo

All Comments

Coomer

This nut requires a 14mm wrench and a 5mm allen wrench to remove. The 5mm allen wrench goes inside the nut and is used to hold the bolt still while the 14mm nut is removed. My advice is to loosen the 14mm nut first with a socket and ratchet until it spins with the bolt.Posted August 16th, 2006 at 7:47 PM.

Leave a Comment

If you login or become a registered member, you can leave comments. Register Today!