6G Celicas Forums

Not that I can think of. The only things I dis connected was the wire from the amp to the sterio and the plugs that go to the amp. These now go to the new head unit. I'm now noticed that the switch on the steering wheel will try to activate the accel if I lift up on it and kid if press it toward the dash. But it doesn't want to do this all the time either. I have to really work it to get it to do this. and it doesn't seem to actually start to accel unless I hold it there for a few seconds. Like it is responding slowly. Have not managed to get the cruise to actually engage at all no matter how much I mess with it.

Need some help. I just hooked up my sterio. I used the adapter to connect to the factory wiring. Used the antanna remote wire to be the remote for the amp. This all bypasses the factory amp. After doing this noticed the the cruise control light will come on in the cluster, but it doesnlt seem to engage. Been running through a 96 Toyota wiring manual but can't seem to find anything connecting the two. By the way I'm the proud owner of a 94. After 10 years The airbags went off in a tiny fender bender and they totaled my 96. So now have a new project. Any help would be awsome...

Need some help. I just hooked up my sterio. I used the adapter to connect to the factory wiring. Used the antanna remote wire to be the remote for the amp. This all bypasses the factory amp. After doing this noticed the the cruise control light will come on in the cluster, but it doesnlt seem to engage. Been running through a 96 Toyota wiring manual but can't seem to find anything connecting the two. By the way I'm the proud owner of a 94. After 10 years The airbags went off in a tiny fender bender and they totaled my 96. So now have a new project. Any help would be awsome...