6G Celicas Forums

Sold, thanks for lookin

Ok maybe I should have read the ebay posting before I listed it, no matter here is another one, and maybe this is better


http://cgi.ebay.com/ebaymotors/CELICA-ST-1...sQ5fAccessories

Well its the same freekin header or at least the same design, it looks exactly what I have minus the better pipe lining than the exhaust manifold, it will bolt exactly to my existing exhaust without an extending piece, and only has one O2 sensor which needs to be moved, Being that it is stainless can i weld a regular bung to it and where do I weld it on the 2 pieces where it will read the best? The pipe is still kind of split right before the flex pipe and after that were going to the bottom of the engine.

Now i bought the current Ebay header for the 94-99 celica which mine is a 96. Now my engine does have a cat but it is not off the exhaust manifold it is past the mid pipe, no worries there. Other than that it will take place completely of the one i have and everything looks like it will bolt on directly. The only difference is that the O2 sensor that they have on the ebay header has the bolt on style O2 sensor and mine is the screw in one. Also my current position is a lot lower on the exhaust manifold and reads all 4 cylinders where as the ebay header is on the left and reads only one cylinder. Someone has had to run into this. I know i could plug the bolt on hole by making a plate but what about my O2 sensor it would have to go much lower on the header to read all 4 cylinders? If I just keep it unplugged will it make my car run like crap?

Current Ebay Header

Thanks in advance for the help

I would like to see a picture of the valve cover if you have one or can take one

Looking for the front grille if anyone has for sale to fit a 96 st

If you have the emblem is it a 25th anniversary edition, and if it is do you have the front floor mats?

I had a 5th gen gt and it was such a good car for me It was no question that I wanted to get a 6gen though i did debate between the 6th and 7th gen models. when it was all said and done I liked the styling on the 6th gen a lot better and being in the automotive field when i bought it the 6th gen was just as easy to work on as the 5th gen where as the 7th gen has gotten a lot more complicated. The only thing nice about the 7th gen is if you are into tuning there is a heck of a lot more that you can do with it. But i have to say I have had my 6th gen now for about 3 years and haven't had any problems with it and still love the styling and the way it drives every time i get in it. The only thing you want to watch for is that you dont buy it from a youngster that has really beat on it or at anytime over revved the engine, it was very hard for me to find one with low mileage and in good condition, i ended up driving 5 hours just to get mine. Happy searching and I dont think you will be dissapointed.

Thanks, this is where i was thinking of putting mine as well. it is very cluttered and you would have to bring the fuel line across the engine if you were to place it near the fuel filter. nicely done

I am curious where every or anyone else has mounted their aftermarket FPR, i have recently purchased one and am looking for a good place to mount it that will not be to hidden and will still have easy access.

Pictures please

Thx

bump, still looking

I have sent PM please let me know on price

Does anyone know where i can get the authentic splitters for the front and or back?

Also the JDM Fog lights i have just need a way to attach them to the car as well as the driver side vent with the fog light switch if anyone has and is willing to sell.

http://i275.photobucket.com/albums/jj315/p...bi/100_0804.jpg

this is what i have and am looking to attach if you have anything or ideas

thanks in advance

http://i275.photobucket.com/albums/jj315/p...bi/100_0804.jpg

this is the light i have in my car i just need to know buy a mount for both sides or need a crafty way to install them. I thought of honing out the plastic covers that were there before. Has anyone else ran into this. I also figured if someone may be putting on a new bumper or body kit and wanted to get rid of the hardware for the fog lights you have a buyer, i also need the switch for the interior. Many thanks

Also does anyone know of a current source of the SSIII front splitters replica or authentic, i'm looking to buy