6G Celicas Forums

Part #: 22270-74210

My valve is crapping out. Looking to see if anyone on here might have one laying around and willing to part with it.

Send message if you do or might have an idea where to find one around the LA area.

tried cross-referencing the part number with USDM vehicles but no luck.

A/T or M/T?

Still have the timing belt cover? Pm with price shipped to 90062. Thanks.

Pictures are up and the car is located in Downey area.





lol sorry man, they didn't survive the accident

Yes. mirror is still in good shape.



the front end took a pretty bad hit so anything like brackets and head lights were destroyed.



engine was in pretty good shape before the accident, i had rebuilt the head at 195,000 miles and the final mileage was 212,000.

nothing like that unfortunately.




fenders are black but not in good condition they were ruined in accident. Do have the ecu available and it is a 5 speed. pm with an offer.

unfortunately it's just the regular sound system not the 8 speaker




still have them. $35 for both + shipping.

parting out my wrecked GT, let me know what you need, PM offer and if i still have it hopefully we can make a deal. will post pictures up later. thanks.

















took me a while but here are some pictures. been pretty busy but I should start getting all the stuff ready for the guys that requested some. thanks for your patience.

5S-FE exhaust manifold will not fit. Had the same problem with my 3S that it only came with the manifold and no B-pipe. Had to get one custom made.

how much for the motor alone? no need to ship I can pick it up or meet up whichever is more convenient.

Correct. Only had liability insurance and since it was a single car accident I wasn't covered. But I have moved on and bought another one and swapped in a 3rd gen 3S-GE So not all is bad and now I'm going to begin parting this one out.

Username: jay_el
Location: South Los Angeles, Ca
Car/Chasis: 95 Celica Gt/ST204/3S-GE Swap
Future plans: Upgrade exhaust system, install lowering springs
Meets: Haven't been to one in a while.

Cali members:

ILoveMySilly97 - Hanford, Ca
Warapparel - San Diego, Ca
DST94- Oceanside, Ca
BonzaiCelica - Newport Beach, CA
Prowzee - Garden Grove, Ca
Smaay - Lancaster, Ca
azn87 - south san francisco/daly city
Markie - Cerritos/Ca
celicaracer8o5 - Oxnard, Ca
JDMCelicaGT - Sacramento, Ca
genesis12728 - Inland Empire (30-40 minutes east of LA)
OldskoolTizok - Heber, CA. Imperial Valley 760
xs94st - Cerritos/Corona, CA
jay_el - South Los Angeles, CA

PM Sent

Hey guys I'm looking for the two part heat shield for the exhaust manifold for a 3rd gen 3s-ge. If you guys have one laying around please let me know how much to ship to 90201. thanks.

http://i3.photobucket.com/albums/y77/galax...eheatshield.jpg

You wouldn't happen to have the fog lights for the 95 would you?

Over a year since my last vehicle which was 94 Celica GT (ST204) which ended tragically in a freeway accident (never got to complete my dream of a 3S-GTE swap), I've been riding public transportation. About two months ago while surfing Craigslist for cars and parts, I happen to come across somebody selling a 3rd gen 3S-GE at a really cheap price so eventhough i didn't own a car i bought the engine anyways. Engine looked good had harness (although cut in some places) it was pretty complete and most importantly it had the M/T ECU. About a month after that which was about a month ago, I happen to come across (on Craigslist again) somebody selling a 95 Celica GT shell complete just no engine at a very good price, although money was a bit tight do to work being really slow, I managed to cut a deal and get the shell. So now with an engine and a shell I commence the process of getting my car going. I'll post pictures and update on the status of the vehicle a bit later. By now the engine is mounted already but ran into the downpipe problem. The engine came only with the header not the downpipe and as we know here in the U.S. the 3S-GE never came (well at least not the 3rd gen) so there is no way of finding a downpipe in a junk yard or something like that. So my solutions are over seas shipping at a really expensive cost or go custom with a local. My solution happen to live next to my mechanic's shop. He custom made a downpipe for me using the downpipe from my old 5S-FE and measurements from my mechanic's 3S-GE downpipe which he also had to get custom made. My mechanic being 99gt3sge (he's on here also look him up) had run into problems like this so knew how to handle them. I'll post pictures and more later tonight or tomorrow, just wanted to post something up to get this topic started.

This is a pulley/bracket that I need to finish putting my engine together, the block that I bought didn't come with one and I didn't expect it to be very difficult to find. I"m hoping someone might have one laying around or something. Let me know if you guys do, I would gladly take it off your hands. Also an engine harness for a 3rd gen non Beams 3sge would be awesome if someone has a spare one let me know how much for the price. The engine i bought came with one but the ecu plugs have been cut and a lot of the sensor plugs are also missing. I would rather get a complete one than deal with putting together this one I have. Thanks in advance for reading and letting me know if you guys have any of these parts.

I tried to send a PM but your inbox is full.

I'm over in Los Angeles. zip code 90062

Looking to buy a timing belt cover for my 3rd gen 3S-GE non BEAMS engine. bought my engine but didn't have a cover let me know if you guys have one lying around I would be willing to take it off your hands. thank you.

Looks like this:

is it a 3s-gte or a 3s-ge? if it is a 3s-ge would you happen to have the downpipe piece that goes underneath the headers?

would you be willing to sell the tail lights individually? I'm just looking for the passenger side one, mine was broken in an accident so i just need one. if you are it would be great but if not then i understand also, it's kinda hard selling just one lol. thanks.

for sale are these stock Toyota Celica rims located in South Los Angeles. they fit any Celica from 94-99. they are in pretty good shape. I have no use for them. if you want them you'll have to pick them up as I have no transportation right now. I'm asking for $100 go ahead and PM me if interested or have an offer I will respond as soon as i can. sorry I won't ship anywhere just local pick up. thanks.

What's up guys I was posting this to see if anybody out there in the forum works or knows of a body shop around the South Los Angeles area that is willing to do house calls for estimates. Had an accident with my 6th gen back in October and it's just been sitting there. I don't want to get rid of it because of some parts i had installed but the car is beyond repair in my opinion. It has come to my attention that I can file a claim with Cal-Trans to get paid off for my car accident since it happened due to debris in the freeway which wasn't taken care of. In order to file this claim I need to submit it with two body shop estimates. If anybody can recommend somebody they know I would be grateful. Thanks.

Here's a few pics of what my car looks like now.

again thanks a lot man. can't wait to install those bad boys in my car.