6G Celicas Forums

Ive started a project not too diffenrent. I wasnt happy with the light i was getting from just 3 leds, so i've gone a bit tim the tool man on it and gone for more light, more power!!!

http://img706.imageshack.us/i/p9050081.jpg/

appologies on the bad photography, still trying to get used to taking night shots

I've also got everything taken down so i can make a how to if all goes well, but next is the hard part it invloves about 20 leds and some pvc piping...

All fixed now thx for your help, still not happy with the backlighting tho, anyone know of a way to get it brighter, using t5 wedges that have been cut down atm... the light is more dark blue atm

I've got myself into a small problem, i started changing over the leds in the cc console, but cannot for the life of me get the leds behind the air con buttons to light! it seems they are running on a different circuit to the rest of the globes. Ive tried using 43, 470 and 530 Ohm resistors, but nothing works... was wondering if anyone else had this issue? or if any of you have a circuit diagram i could see. Im using 3.3V leds @ 30 Ohms


thx

Scotty

Got into the car yesterday, turned the car on, got this awful groan from the back of the car! looked over and the aerial wasn't going up... got out and noticed instead of sitting flush, it was stuck at a height of 5in (10cm) and would not go down any further. I manually pulled the aerial up so i could listen to the radio while i was crusin around! Just wondering if any of you guys know where i can go to find out how to fix it myself (I've only had the car a month now, cant really afford to spend money to fix it atm). I'm thinking i can do it myself... just need to know how to go about it!!!