6G Celicas Forums

This is not only possible but actually very easy to do, I done this to my uk GT about 4 years ago and at the time I was the only person in the world mad enough to do it. Especially when everyone said whats the point and superstrut is expensive when it breaks Blah Blah Blah

anyways what you need is as follows for a perfect fit

1. all suspension arms + hubs with brakes + uprights(shocks, springs)
2. Steering rack and rack ends
3. anti roll bar and drop links

an easier way to do it is buy a front cut with SSS or buy a car as I done with SSS and drop the entire subframe and rack as one unit. then just bin your own stuff and lift the new complete subframe with SSS and quick rack up underneath. your original ABS will still connect if you have it but you will need the brake lines for the twinpots on the SSS

this transformed my car instantly and was by far worth more than any other mod i done

to get at the lever mate you need to take the drivers seat out and lift the carpet, once your in there is a bolt holding it in place, once you undo that bolt the levers pull out from behind, (on my car this is what was broken) to get the cable out completly you need to take of the boot lining to show the bottom of the ariel (fuel release mechanism is behind it - pop the cable out of the holding at this end and then change your levers (as they fall apart)

good luck

and only reason i know is i spent 2 hours yesterday....yes yesterday figuring all that out