6G Celicas Forums

Price reduced!

ARP Studs (203-4204): $150
Apexi Head Gasket 1.5mm (814-T202) : $200
CP pistons 86mm 9.0:1 (SC7449): $700
Manley Rods (14008-4): $400
ACL Race Series Big End Bearing Set: $50
ACL Race Series Mains Bearing Set: $50
ACL Thrust Washer (2T1689-STD): $10
Viton valve stem seals: $10
But selling all together for $1,200 (Price of shipping not included. Pick up is also available in Sydney).

Hey all,

All items listed are brand new and have not been opened.
Apexi Head Gasket did not come in its original packaging.



ARP Studs  (203-4204): $150
Apexi Head Gasket 1.5mm (814-T202) : $220
CP pistons 86mm 9.0:1 (SC7449): $750
Manley Rods  (14008-4): $450
ACL Race Series Big End Bearing Set: $50
ACL Race Series Mains Bearing Set: $50
ACL Thrust Washer (2T1689-STD): $10
Viton valve stem seals: $15

But selling all together for $1,400 AUD (Price of shipping not included. Pick up is also available in Sydney).

Car has been sold.





Hey all,

I've decided to let go of my beloved celica.

http://www.carsales.com.au/private/details...D-3795690/?Cr=2

Price: $8,500
Odometer: 90321

Specs:

- ST205 GT4 Engine
- Apexi air intake
- Apexi N1 muffler
- Exedy Heavy Duty Clutch Kit
- Walbro 255 fuel pump
- Hallman Manual Boost Controller
- ST205 brakes calipers
- DBA slotted rotors
- TRD Brake Pads
- SS Braided Brake hose
- BC Racing Coilovers (BR Series)
- ST205 hood
- ST205 bumper
- TRD Hood Rain Deflector
- 6000K HIDs
- Kouki Projector lights
- Kouki Rear lights
- Clear indicator lights
- Clear Side indicators
- TRD Rear extension
- Eurou front lip
- SSII OEM side skirts
- 18" Avant Garde M310 Wheels

Interior:
- Racing Pedals
- Momo Race Steering Wheel
- Momo Steering Hub Adapter
- Momo Gotham Harness Pads
- Vincent Doggy Floor Mats
- Vincent Doggy Custom Seat Covers
- Vincent Doggy Armrest Cover
- Aftermarket Handbrake
- Handbrake Boot
- AEM Digital Boost Gauge
- STRi 52mm Gauge Pod
- Chrome Gauge Rings
- Gauge (Blue LEDs)
- Pioneer AVH-P5200BT In- Dash 7" CD/DVD Receiver
- Rear reversing camera
- Rockford Fosgate sub 12"
- Pioneer D-class mono amp
- Pioneer 2-channel amp
- Soundstream 6.5" splits
- Dynamat sound proofing

Please message me if your interested or have any question.

Cheers.

Iv been waiting ages for these
Can you please put me down for a Triple RHD 52mm pod.

Thanks.

My setup:

- New DBA Rotors machined to 300mm
- New HAWK HPS Pads (Supra twin turbo)
- No spacers installed

Hi all,

I just noticed an issue with my front brakes.



This is happening to the inner and outer pads on the front brakes.
Could it be that I have the wrong pads, or the rotors have been machined down more than 300mm.

Also I noticed that on turns the ball joints come in contact with the rotors. I can clearly see the marks engraved on the front rotors from the ball joint.

Would anyone know what is the cause of these 2 issues?

At least I know I dont have to change my transmission. Iv spent enough money on this car lol.
Ill just take it back in and have it looked at.

Thanks for the info

I had recently replaced my drive shaft about 3 months ago and today I realized its failed again. While doing a right turn it made the same clicking sound as before. So im pretty sure its the drive shaft.
Im using the s54 tranny with the 3rd gen 3sgte engine and my best guess is that it cannot handle the power on take off or when shifting down to over take.
I just wanted to what you guys think and or if anyone has experienced the same issue.
Would I need to change to the more powerful MR2 tranny with lsd?

Cheers.

You should be fine. The wheels will sit flush in line with the body of your car. Maybe the fronts will stick out a tiny bit. Also since they are 17" you shouldn't get any rubbing on the rear.. Depending on your tire size.
I currently have (Fronts: 18x8 +30) (Rears: 18x9 +30) and i had to get my rear guards rolled.
Hope this helps

btw that wheel looks freakin nice!

Thanks man
If it wasn't for this forum I think my car would have still been stock haha.

Before:



After:

I have purchased my project lights, GT4 brakes, and Eurou front lip from him. I never had a problem with him. Not sure if anyone else has.

Cheers.

I just ordered a set of Vincent Doggy floor mats and the customized leather seat covers.
Best self Christmas present lolol.

Yeh it was Autobase haha.
I still have to make a custom intake box to make it 100% legal to drive.
But knock on wood, I havent been pulled over yet.

Performance
- Gen 3 3SGTE conversion
- 3" Turbo back exhaust
- Apexi air intake
- NGK spark plugs and leads
- HKS oil filter
- APEXI N1 muffler
- Competition stage 4 clutch
- Walbro 255 fuel pump
- ST205 brake calipers (painted red)
- DBA slotted rotors
- Hawk HPS Brake Pads
- SS Braided Brake hose
- Falken FK452 tyres:
(Fronts: 225/35/18)
(Rears: 245/35/18)

Suspension
- KYB GR2 Struts
- Vogtland Lowering Springs
- Front Strut bar

Exterior
- ST205 hood
- ST205 bumper
- TRD Hood Rain Deflector
- 6000K HIDs
- Kouki Projector lights
- Kouki Rear lights
- Clear indicator lights by wolfie
- Clear Side indicators
- TRD Rear extension
- Eurou front lip
- SSII OEM side skirts
- Avant Garde M310 Rims:
(Fronts: 18x8 +30)
(Rears: 18x9 +30)
- Hubcentric rings 57.1 to 54.1

Interior
- Aftermarket Handbrake
- Racing Pedals
- Momo Race Steering Wheel
- Momo Steering Hub Adapter
- AEM Digital Boost Gauge
- Chrome Gauge Rings
- Gauge (Blue LEDs)
- Pioneer AVH-P5200BT In- Dash 7" CD/DVD Receiver
- Rockford Fosgate sub 12"
- Pioneer D-class mono amp
- Pioneer 2-channel amp
- Soundstream 6.5" splits
- Tinted windows
- Dynamat sound proofing

Yeh it was a dark bluish colour, how did you know lol

I recently completed my 3rd Gen 3SGTE swap. I cant exactly remember where I purchased my cut from (some place from Revesby). But there is another place that Ive bought parts from and they are good. The place is Ichiban (http://www.ichiban.com.au/) give them a call as their website is not always up to date.

I also got my car engineered by Col Potts (Col Potts Engineering Pty Ltd) He is authorised by the RTA. He is really easy going. The inspection for my car only took 30mins, and he even told me i didn't need to upgrade my brakes just gets good brake pads (but i had already done the brakes).

I hope this info helps

Thanks, yeah it needs the TRD Spoiler. There's so many modifications you can make and once you start there's no stopping lol.

Just got my front lip and rear skirts finally installed

I wish i could afford an aftermarket ecu but im pretty broke atm lol. Your lucky uv already got the fuel injectors to go with ur new ecu.
If i do get one it will probably be a Link G4 plug in ecu.
Check out the website below.
http://www.linkecu.com/products/engine-man...g4-plug-in-ecus

I didn't think of that at all... Thats perfect man. I can find one for a good price off ebay. Iv got the AEM boost gauge so it will match up nicely
But yeh, here in Australia we get ripped off and it doesn't help being so far from the rest of the world lol.

Btw how is your car coming along?

Hey guys thanks heaps for the info.
The 89465-29725 is the one i need but its too expensive and needs to be shipped from Japan.
But I can get the 2nd gen one for $140 and they have it in stock

Thanks again

Hi all,

I hope someone can help me out here. I live in Australia and I am having trouble finding an oxygen sensor for my JDM 3rd Gen 3SGTE. The issue is, in Australia the GT4 model has a different oxygen sensor compared to the JDM.


AUSTRALIAN OXYGEN SENSOR (Brand: Bosch):
Single wire connector




JDM OXYGEN SENSOR (Original) The one for my car. I think from what I can read on the o2 sensor the part number is 89465-20370.
Four wire connector

and


Does any one have a working JDM o2 sensor for sale or knows where I can get one shipped to me?
Iv read else where that the part number is 89465-29725. Is that the correct one for me?


Regards,
Ramon

Hi all,

I hope someone can help me out here. I live in Australia and I am having trouble finding an oxygen sensor for my JDM 3rd Gen 3SGTE. The issue is, in Australia the GT4 model has a different oxygen sensor compared to the JDM.


AUSTRALIAN OXYGEN SENSOR (Brand: Bosch):
Single wire connector




JDM OXYGEN SENSOR (Original) The one for my car. I think from what I can read on the o2 sensor the part number is 89465-20370.
Four wire connector

and


Does any one have a working JDM o2 sensor for sale or knows where I can get one shipped to me?
Iv read else where that the part number is 89465-29725. Is that the correct one for me?


Regards,
Ramon

Since it's a nice day I thought id take some pics with my phone