6G Celicas Forums

Ok I'm waiting for a half-cut from Japan to arrive here in Barbados. As soon as it is here I'll start the updates. Presently stripping the car down to its bare bones. Pics coming soon!

Hey guys! It's been two+ years since I've been on, but I'm rebuilding my ST202 from the ground up. Doing the 3S-GTE swap and all that. Pics and progress as it continues....watch this space! Advice Welcome!

Hey guys, I need DESPERATELY to find an OEM part supplier for the JDM SS-II with the 3S-GE engine. (ST-202 Chassis) I tried fensport in the UK and they don't have all I need. Please Help urgently.

Thanks Guys,

Fensport had the part and I had it sent today. I really appreciate the help.

I need Urgent help Guys. I need to know where I can source the Hydraulic tensioner for the Timing belt. I think the part # is 13540-88480.

Hey guys I am desperately searching for a supplier of JDM parts. all the ones I have found cater to the US ST and GT. I drive the ST202JDM. can anyone help?

Very reasonable. How can I find them online though?

Are the rotors from irotors for the SSII JDM?

Kwanza I live in Barbados man. Things here are expensive as all hell. these joints will cost me $1500BDS each. Thats $750USD each. What else can I use then? I'm going to need it soon. HELP!!!

I need to replace mine right now. R u suggesting something?

Thank you so much I appreciate the help.

Hey Guys I need MAJOR help to find JDM OEM Parts online. Anything you can do to help would be appreciated.

Is there an online place for OEM CV Joints?

Thanks magic I'll check it out.

Hey Guys, I need some help. Where can I get this intake and what will it cost? Also does it come with all the piping for the SSII?

How about the C one rotors? Are they good and what pads should I use?

Please help guys, I have a JDM ST202 and I need some websites to get parts. Preferably Japanese and US as I don't live in the USA. Getting what I want in Barbados is proving to be difficult. I'm desperate for help guys.

hey guys,

I'm researching and asking questions on various modifications I am contemplating. I have been told that using an Ignition controller eg. MSD etc. can be harmful to your car's ECU. Is this true? If any one knows please respond soon.
Also I'd like to know where I can research engine mods before trying them. Does any one know good sites?

Thanks in advance for all your help.

Thanks for the info. I appreciate it.

Where can I get that?

Hey!! a little help please.

Hey guys,

Here are my plans for my celi's engine: APEXi SAFC II/ Power Intake; Fuelpressure regulator (adjustable); HKS Racing Header Type II if available; MSD Blaster HVC/ Digital 6-plus ignition; Magnecor KV85 plug wires; Power Enterprise Timing Belt; 2.5" piping from header to barrel.

Does anyone know how much power I should get from this? I've got a 3S-GE JDM.I don't want to go turbo anymore. I just want to maximise what I have. Can anyone help with best prices for all this stuff?

Once I have this taken care of I want to do the suspension, any suggestions?

I also need to find the fuel pressure regulator I don't know where to get it and what brand.

thanks for your help.

P.S I want to thank West Minist for all his advice.

hey guys I've got three questions:

1) What size speakers go in the spaces near the rear seats?

2) How do I get to these speakers?

3) Where can I get the correct size speakers with a 150w RMS rating for each space?

Thanks in advance for the help.

Hey guys is anyone running with an MSD (or other) Ignition? Do you know how much more hp it can give? Which unit should I choose? Does it improve mpg? Does it increase acceleration?Advice please?

Hey guys just a question: Is there any thing that can be done to an engine to combat the effect of the number of miles its done? For example are there any parts that you could change to recondition it? I hope I'm being clear. Bottom line is that my engine has 100K miles on it is there anything I can do to lengthen the lifespan or should I just swap it out. I have a 3S-GE. JDM.