6G Celicas Forums

40$ Shipped.

DTE

TinFoil (top pic)
Jeramy01 (I Think From salem) (2nd pic)
BlackcelicaGT94
AmysMojo (99 GT hatch)
AndyST4
AceNova (white ST hatch)
Doge (3sgte Silver hatch)
CrazyCeli18 (black ST hatch)
Dabbil (teal ST hatch)
Coomer (yeller 20v coupe)
3rdGen3sgte (believer Silver ST hatch)
CelicaBuddy (white Vert)
Nik (7agte beast green)
97lestyousay (97 ST green hatch)
Creis (94 GT teal hatch)
OrvillesCelica (Red Vert)

DTE

Haha ask anyone My house, I have 2 parts 6gc's...

But basicly besides that I beat everyone to the yard (buddy works there gives me the heads up) so you kinda out of luck, but hit me up and come by the shop.

DTE

Allright sense I am waiting for paint to dry no joke.. I will write out the events of the night....

On the drive to Toyota Performance basicly lost all power and sputtering really bad. Zai (owner and head monkey, as his is prefered to be called) pulls out the all mighty all code reader for any Mofo car out there. So code 12... but the twist code 12 on ODB1 isnt knock sensor, its the crank sensor thats strangely enough located in the Distrobuter... Rip it apart.. metal shaving everywhere, clean it out, fire it up, running without sputtering, but still shooting 12. So I am now stuck with gettin a new distrobuter, and just to figure my luck the one off my 96 block wont fit.

So now the car is running decent, but parked in favor of the TT as the daily for now.

DTE

Allright I reset the ECU many of times kept coming back, Its not knocking at all, but is running really poorly a 800rpm and sputters all the way threw the RPM range.

Where do I check the wiring?

Also If I have to replace my Knock Sensor, will the one of my 96 block work?

DTE

Yeah it was a little fun ripping off a bumper...

hurley97 - Wheels that came with the car jerk... Anyways those are 17"s... I will go bigger....

DTE

How do I replace Knock Control Sensor signal?

DTE

So driving down the highway basicly lost all power, and gimped her home, did DG's Code and got this.

F P F F P P P F P F F

Check it about 10 times so I am pretty sure its right.

However no one around here has the codes and or a OBD1 Code reader for my car....

Can anyone find out this code?

DTE

I found this out from toyota perfomance first hand.

Impact Gun
14mm Deep Socket
Wire Brush Wheel For drill / Air grinder
PB blaster

Grind the crap outta the threads so there all shiney and new looking
Soak it all in PB Blaster
Hit it with the gun till it comes shooting off, Did it 9 times between my cars worked perfect everytime.

DTE

I had a 96 ST anni edition fully loaded, 5spd, 100k, that I bought for just a little over 2k... I think that it depends on the region really.

DTE

I just found out a sure fire way to get these off, except everyone I talked to told me not to waste my time to post it...

Drill it out!

Anyways Those suck, I have a brand new OEM toyota peice if your interested.

DTE

I have had sorta the same problems...

The Ground-trigger switch is currently shot on my passenger side, and I would check the hatch one. Just have to take out 1 panel to check it, the Door ones are a little more pain in the arse.

DTE

Me and a bunch of friends went to the Midnight showing, got there around 10pm there was a little car show, mainly just people going ooo and ahhh over intakes n lights... but It was a decent movie...

DTE

The Playmates - Beep Beep Beep
Gewn Staffani - Crash

DTE

Tin Foil came to get my 96 Bumper and apparently gonna come back pretty soon to get my leathers, Pretty successfull mission thanks to Batmans Bumper How-To. Hes a pretty new 6gc owner but been on the site quite a while, both of ours are a little rough around the edges but we all got plans.

94 ST Hatch, Fully loaded.. My new beast...
94 GT Hatch, everything but leather...

DTE

7" Front, 6.5" Rear

1" Tweeter, 4" Mid range door speakers, IF you have those options.

DTE

Are these still for sale?

100$ plus shipping?

DTE

There was a article on it in SuperStreet about mabey a year back, It uses's I believe it was a 3ZZ custom motor, and a Ford 9" Rear End(up-front that is) with custom made knuckles to steer.

DTE

The yellow 77 fastback is gone... I now have a Gray 77 fastback in alot better condition.

DTE

PM Me, I have a few.

DTE

Shaved: Rear wiper, Wing, Squiters

I planned on shaving pretty much everything Untill that car got hit, on my new 6gc pretty much everything but the handles is gonna go.

DTE

I would just use the stock mounting location to put 2 6.5" reference Infinitys to complete the setup, I had a complete set of componets in mine and it sounded really nice.

DTE

Yep just like that, looks stock, sounds good, doesnt advertise anything..

DTE

I think if you seperated the Top ones, into componets and then used them in a Premium Door Panels that would be a nice setup.

DTE

Jgreening > Owned

Anyways Offset and Rim width.

7.5" is just about perfect for a 225/235.

I have 225/35 and 255/35 on a 8" wide rim

DTE