6G Celicas Forums

Where can an American buy replacement pads and rotors for the GT Four brakes?

I found a reconditioned set from a wheel shop for $399 + 65 shipping

Unless you can beat that I think I'm going to buy the recond set.

I looking for a set of 2000 or newer Celica GTS 16" aluminum rims. Let me know what you have

I have them just never got around to putting them on.

Yeah I finally painted the vert a little over a year ago.







Here is my coupe and vert together

I originaly started a GTFour RHD conversion almost 4 years ago. Back then it was a rare to see someone try this conversion. Recently I decided to come back for over 2 years of not being on. I see all kinds of converted cars. This got me thinking, I have three celicas a 94 Liftback that i did the GTFour RHD conversion, a 95 Coupe GT and a 96 Convertible GT.
What if I did a GTFour RHD conversion on all three cars? Have you ever seen a GTFour Coupe or a GTFour Convertible?

Finally got some rims for the GT-Four


They are 18" DRAG DR-11

It's going to get done sooner or later. The part that kills me is my Tundra that I bought, it is costing me $500 a month for it just sitting there. Thats money I could be putting in my car, and it's killing me not to be able to drive the celi. But anyway this is too rare of a car to sell it will get finished

$1,850 Car shipped to my house
$ 150 Radiator support to fix the damaged front end
$ 700 GT4 front clip no engine shipped to my door
$ 600 GT4 hood shipped to local shipping dock
$ 850 GT4 bumper with fogs and bracket shipped to my door
$ 400 for misc. missing RHD parts
$1,600 GT4 ST205 rear end set with all 4 knuckles and brake calipers shipped to my door
$2,200 3rd gen 3sgte engine set shipped to local shipping port
$ 250 TRD front strut brace shipped
$ 150 GT4 rear strut brace with covers shipped
$ 150 GT4 rear wing lift blocks shipped
$ 200 for material to fabricate the rear end crossmembers
$ 120 GT4 rear struts shipped
$ 200 TRD racing seats bought from friend
$ 500 Pioneer AVH-P4000DVD touch screen
______
$9,920 is the total so far, and I still need


$ 350 Koyo radiator
$ 200 GT4 jdm taillights
$ 800 GT4 jdm projector headlights
$ 200 GT4 power folding mirrors
$1,000 Nice set of rims and tires
$1,500 New paint
______
$4,050 more to spend

I'm not much for red but it's still sexy

I decided to tinker on it a little bit and work on some of the things that need to be done but don't cost money.
Like the right side motor mount (ST to GT), Moving the windshield wiper motor to the other side, and fabricate
the brackets to hang the gas tank.

Sorry but I'm not building any more crossmembers they are a pain.

The Three Amigos

I said "At this point" doesn't mean it will never get done. All I do is state a fact and instead of everybody trying to pump me back up into trying to finish it you just want to talk crap.

As of right now I have 10k in it as it sits. If you think I fail I DON'T CARE, just because its not finished DOES NOT mean it never will. Because you think I fail, I will never share pics of the finished product.

I've lost all interest in celicas, so at this point it is never going to be finished.

Sorry, I lost interest in this project due to lack of money.

Unless I pull out the micrometer and check measurements, they all look the same to me.

From what I know "iburnslabs" sold it to the guy that is now trying to sell it. But if you ask me I think the rear end looks like a hack job.

I don't know, I do all my own work. The reason I went with changing the quarter out is because, The body lines are all smashed at the door and are hard to fix. Its just faster to change it, I'll post up pics when I do.

No I sawzalled it off the car down the street at 2 in the morning, LOL

Finally got her running!!!!!


Here's the short block out of my 96 vert, cleaned it up and ready to put back together.


Here it is built and ready to put in the car.


Installed in the car and runs great!


Here's a rear quarter I found for $50 to fix the damage

Sorry everybody, But unless somebody wants to sponsor me, it isn't getting any farther until I find a new job. I have too many other bills that are way more important.

Nevermind I guess I'm too computer illiterate to make it work right

Just sold the whole setup localy