6G Celicas Forums

I'm also thinking about cold cathodes to my car. But what kind of switch did you guys use? I was thinking that I could buy a Sunbeam Lightbus to control the lights, but I'm not sure of how to connect the power cables from Lightbus?

Any suggestions?

You'll find it at this site:
http://www.sunbeamtech.com/

It's not that hard to make a bracket that will fit the 6*9 speaker in the side panels. I did this in my car, and it sounds great. You just cut the plastic on the back, screw a 6*9 bracket on it (from the back) and then use some foam to seal the gap between the bracket and the plastic. (sorry I don't know the english word for the foam that I used, but it sealed it up great). And I'm sure you can do it nicer than I did, it was sort of a hasty job

I've searced all over the net without finding how big fuse there are on theese amps. Anybody who's familiar with Macrom? The two I'm after are M1A.1000D and M1A.460

If it's decent sound you're after, I agree that all Alpine, Pioneer, Kenwood are ok. But, if you want that little something in sound quality I'd go with any of these WITHOUT a build-in amp. Buy instead some cheap 4 or 5 channel amp with 1000 W. The sound will be much better + you can play a little louder!

Yeah! okay, okay! I'm pretty new at this so I'm just doing some research

I hear everybody here with a ST got Greddy. Anybody who've had anything to do with Remus?

I have a problem, living in Norway and all

On www.erebunicorp.com it says that the kit for the ST205 is for the Japaneese/European car and that that the ST202 is for US cars. But the dealers in Norway says that the ST205 is the GT-version. I own a AT200

Help anybody? Which one would best fit my car?