6G Celicas Forums

Time to put oil in engine and tranny, install axles, install all body parts, and wash her

Will good news today starter turned over the engine 🎉 but then my battery died 😡 so I am done for tonight and battery is on the charger will work on it some more

I swaped the dash with the dash harness and it works

Did I every till u all I don't like wiring

Nop 😭😡😞 every time I get off work it's dark (yes I do have lights) need to geth her runinng I miss driving the celica And i need a 2nd car my Nissan hardbody is about to throw a rod so I need to fix her next

Found this in the BGB look at we're the park/neutral postition swith gose to the ecu at pin 2 and the clutch start swith gose to the ecu at pin 11

There are 2 park/neutral postition swiths one on the tranny and on on the shifter

FYI he is using the auto wire harnes and I am using the standert harnes

What relays the auto and standert starter relays are the same and no one seems to know

Ok going to start removing every thing under the dash 😭😭😡

I give up for today

Her is a recap of what did

Used motor, 5 speed tranny, 5 speed wire harnes, 5 speed ecu, and clutch petal and all it's parts into a auto body

I know the starter works bc I shorted it and it run

I really don't want to take the dash off and change the dash harness but if I have to I will

I looked at the old car brake petel switch and it had 2 wires going to it but on auto and it had 4 wires do I need to wire nut them 2 together

Yup

Ever thing is pot back together but she will not start 😡 starter not turning

Got the tranny back yestorday $60 latter, installed the oil pan back on today going to hook them 2 together tomorrow morning and may install them into the engine bay if I have time befor I get called into work

Can some one till me what is the difrince in the 7a in the geo prizim and the celica other then that adapter on the oil pan

Installed the cluch petal









Edit
Do I need to buy pass the brake switch?

Today I put the shifter and the center counsel together, ecu, and wire harnes




Pic of the bottem-end of engine



Now it's putting the cluch pedle and will do that tomorrow

Found 3-4 shards of metal in the oil pan so I pulled the adapter so I can see the other piston, I don't see we're them shards of metal came from. So I am just going to put it all back together and wait for the tranny to come back.

It's ok I got every thing I need off the silver celica and pushed her out of my shop(barn) and pushed in my blue 1g mr2 and will work on her till the tranny comes back from shop

Yup it is a 1g mr2 that is all I have the celicas is my gfs, if any one wants the the rims on the black celica let me know bc we are going to put the silver celica rims on the black celica



I got the motor and tranny out of the silver celica today, will have to send the tranny to a shop to fix the mount (closest to the radiator)

Here are some pic of the old motor

The day I got it





Here is the projects side by side


Got the motor, tranny, wire harnes, auto shifter out




I got more pic I will try to post them tomorrow

I have a 95 st 5 speed that got into a bad fender bender now I just found a 94 st auto that has a rod broken in 2 so I am going to take out the motor and tranny out of the 95 and put it in the 94 I will post pic of the swap