6G Celicas Forums

I wouldn't put Ebay coilovers on your Celica;
The ride is just HORRID.

Anyone selling a 6 gen celica?
Mainly looking for 3sgte or gt I guess... but turbo is better !

Looking for a clean title; and relatively around 100k miles. The lower the better tho!
Also... I wanna buy the car local ish; anyone in Washington state selling?

I live in Vancouver, Washington
Close to Portland, Oregon too.

Let me know.

Thanks

^Yeah its the same deal!

Hey 6GC Members!

Just informing you guys that there is a great deal on Living Social!
Some of you guys may have heard of Living Social; especially if you have iPhones! It's an must have application!

Anyways you get 2 movie tickets for $9!

Just letting anyone take advantage of this deal! It's from Fandango!

http://livingsocial.com/deals/57725?ref=em...mp;rpi=13251205

And yes its legit lol. !

I think this is strictly for people in the US only !

Hey anyone have any suggestion on exhaust/mufflers for a 1996 Toyota Celica ST? !

I would like it to be somewhat cheap but also good quality you know? Not some high end racing stuff.

Let me know what's good out there!

I looked on eBay but all I see are universal stuff and idk if they are good or not!

Yeah I think you need to replace your wheel bearings.
I had a similar sound and I replaced my wheel bearings and it was fine.

SOLD! Thread can be closed(:!

Thanks all!!!

Bumpity bump! For $100 plus shipping only now!(:

Packed and ready to go!

Will you be able to sell me the center trim; and the thing below the center trim that goes around the cigerrate lighter and manual shifter? and also the driver side control trim (windows, powerlocks trim) *NO ELECTRONICS for $20 plus ill pay for shipping?

I pm'd you also!

Bump!

Pm'd you waiting for reply on center and driver side trims.

I have a 6k hids from ddm tuning also! and i have had no flashers whatsoever.; i think you should point them down or just get projectors. maybe they are not aligned as the person above said.

but i just installed some silverstar ultras and they are pretty bright too;

Bump!
Thanks, I called the guy but he won't ship only pick up;

Oh and shipping is to 98683! Thanks!

Hey guys,

I have OEM springs and struts off my friends 1996 Toyota Celica ST. He only had 50k miles on the springs and struts before he changed to Coilovers.

I will be selling for $100 plus shipping for ALL four springs AND struts.

They are cleaned (to the best of my ability) packed and ready to ship!

Thanks

Hey guys I'm hoping to look for the center trim piece and this driver side control (locks, mirrors adjustors) trim. *I DO NOT NEED THE ELECTRONICS STUFF; just the TRIM !
I was hoping to get it for cheap maybe $20 or less? Or if anyone can spare me; if you have em just sitting around collecting dust.
Let me know please I want to paint my interior but the center trim piece is cracked; and the driver side control trim fasten clips are broken.

I want them to be able to clip and fasten so no broken clip trims please! .



and



Thanks!

Jb weld is just as powerful tho yeah? I might just use jb weld. Seems a lot easier hahaha.

Is it even fiber glass though? It feels like just a hard cardboard.

What would you recommend to seal it up with?

So while I was doing my oil change I found out that there was a crack on the bottom floor board that doesn't seem to affect anything... when I feel through it; it is just metal/steel... but I was wondering will this have any long term effect? Does it affect something in some way? I don't feel carpet or anything; just metal/steel so I wasn't too worried about water or anything getting into it...

By the impression mark it looks like the idiotic previous owner jacked up the car in the wrong place...

Oh dang really? Okay. Well am I allowed to get an alignment right now? If I get an alignment before it fully settles (half a year) will it jeprodize the full lowering height? I know some people that says to wait till springs settle... So idk if I should wait half a year or just do the alignment now. I just don't want an alignment to jeprodize the max lowering height.

Hey it's been two weeks since I installed tanabe df210s with kybs;
Does it take longer than two weeks to settle? Currently my front is sitting higher then the rears
Anyone experienced this?

Thanks. I also heard that when installing the new KYB Gr-2 Struts outta the box the struts has a break in period too rather than just the springs.
Is that true?

And did your front lower more? As in, could you tell that your front got lower?

Hey guys I just installed my kyb gr2s and tanabe df210s on my celica...

I was wondering is there a "settle" time? Cuz my rear the fender gap looks like a 1.5" but the fronts however looks like a 1" drop only and it is suppose to be a 2.2" drop... There is more fender gap in the front than the back which is why I'm wondering r there some break in time? And will it eventually drop 2" like it claims?

Another question popped into mind!

I just had a friend told me that with that large of a drop; 2.2" the KYB Gr-2's might not be able to sustain the shocks. Is that true? Like it doesn't absorb enough causing the shocks to blow...

But I'm guessing Kaos, that you've had the Tanabe DF210s + KYB Gr-2s for a while right?

Also; Will I be needing Bumpstops; is this gonna bottom out? I will be installing tomorrow.