6G Celicas Forums

I always liked that style of exhaust, nice pick up!

Great pictures! I've seen some crappy rig shots, and those are just sweet.

Please don't get those kind of tail lights! I would suggest you pick up a pair of JDM tail lights, they don't look ricey but give it a clean look in my eyes.

http://www.6gc.net/forums/index.php?showtopic=30123

Those are some options, even though some of the pictures don't work anymore.

How much do they (st205's) go for?

I've been out of the celica game for a while but if I can sell my Audi I'd love to pick up another celica, and it'd be awesome to have the car I wanted for the longest time.

PM's Sent

PM's sent and all replied to!

Thanks everybody for the interest so far!

As some of you know my celica got rear ended and we bought the car back from the insurance place so we could part it out.

Anything you need just ask for and I'll let you know if I have it.

Here is the list of the major things that are currently off the car. I'm looking to sell every little piece off the car so any interior, engine pieces, etc that you might need I would love to help a celica owner out and get the stuff out of my garage.

Erebuni 369 Front Bumper. I paid waaaaaaaaaaay too much for this kit back in the day and is the highest quality fiber glass bumper I've seen.
Asking: $350+ shipping







Matching Side Skirts
Asking: 150+ Shipping
Pictures can be seen above on the car



Sell both side skirts and bumper for 425+ shipping

Stock 94 Rear Bumper:
Asking 150+ shipping
Don't have any pictures of this but its the stock bumper in the Inferno Red paint


Z3 Fenders
Asking: 75+ shipping
They look alright but could use some work at the body shop as you're getting them painted to match. They started to look a little "wavy" after a couple years.




Supra Style Spoiler for a Coupe
Asking: 150+ shipping
Again another Erebuni piece, there are a few led's out in the spoiler so I just left them un hoooked.




HP Racing HPR5's with Hankook K106 225/40/18 tires
Asking: $750+ shipping
Two of the 4 rims do have some curb rash, one has barely anything and the other is a little longer. Tires still have a lot of life in them, I usually had winter wheels/tires on the car so they don't have a ton of miles on them. My car got totaled and I have no need for 5x100 wheels any more.
Thanks for looking!







Stock Coupe Tail Lights
Both sides are in good condition. Only blemish is the driver side has a little mark on the turn signal, you can see what I'm talking about in the pictures. I was saving these in case I ever broke the tails I have on the car, but I'd rather have another working car instead.

$100 + shipping for both or $60 + shipping individually



7afe Valve Cover
Asking $35+ shipping
Rough Condition but perfect for a back up as you get yours powder coated



More Pictures:
http://www.cardomain.com/ride/545432

Like I said if you need anything just let me know and I can let you know if I have it and get some pictures sent over to you.

If it takes a little while to get back to you its not that I don't care by any means! I work 30+ hours every week, go to school full time, plus have to do 40 hours of community service before the end of may so I can graduate, plus I just found out the turbo is shot on my dsm so I have a lot on my mind but I will try my absolute best to get shipping quotes and pictures as quickly as I can!

Thanks for looking!

Replied to all PM's!

Insurance guy called me today and said it was going to be totaled, no surprise, and told me to just pull all my stereo stuff out of it because they wont give me anything for it. So I might call the shop tomorrow and see when they could let me in there to take the stereo stuff out of it and whatever crappy little mods a local would want that could provide stock stuff so it still likes a complete car.

I told John he could have the headlights + some cash for his stockers, so I'd consider those sold. The only other thing on the car I think anybody would want is the intake and maybe the header. Everything else I have I made a for sale thread.

My car is being totaled out and I don't see another Celica in my immediate future so all the stuff I have for it is for sale.

Erebuni 369 Front Bumper. I paid waaaaaaaaaaay too much for this kit back in the day and is the highest quality fiber glass bumper I've seen.
Asking: $350+ shipping







Matching Side Skirts
Asking: 150+ Shipping
Pictures can be seen above on the car



Sell both side skirts and bumper for 425+ shipping

Stock 94 Rear Bumper:
Asking 150+ shipping
Don't have any pictures of this but its the stock bumper in the Inferno Red paint


Z3 Fenders
Asking: 75+ shipping
They look alright but could use some work at the body shop as you're getting them painted to match. They started to look a little "wavy" after a couple years.




Supra Style Spoiler for a Coupe
Asking: 150+ shipping
Again another Erebuni piece, there are a few led's out in the spoiler so I just left them un hoooked.




HP Racing HPR5's with Hankook K106 225/40/18 tires
Asking: $750+ shipping
Two of the 4 rims do have some curb rash, one has barely anything and the other is a little longer. Tires still have a lot of life in them, I usually had winter wheels/tires on the car so they don't have a ton of miles on them. My car got totaled and I have no need for 5x100 wheels any more.
Thanks for looking!







Stock Coupe Tail Lights
Both sides are in good condition. Only blemish is the driver side has a little mark on the turn signal, you can see what I'm talking about in the pictures. I was saving these in case I ever broke the tails I have on the car, but I'd rather have another working car instead.

$100 + shipping for both or $60 + shipping individually



7afe Valve Cover
Asking $35+ shipping
Rough Condition but perfect for a back up as you get yours powder coated



More Pictures:
http://www.cardomain.com/ride/545432


Thanks for looking! If you want any more pictures, please let me know!

It does look like the bolt for the tranny ground. Maybe the noise was coming from the bolt rattling around on the trans and once you put it back in the bolt stopped rattling around thus stopping the sound. Sounds like you did the right thing to me.

I don't really know whats going to happen to it. Hopefully I get to go back and get the stereo goodies off of it. Its beyond totaled, even the dash wasn't sitting right. haha but you did get me thinking about the Lexus's, really wish I had more money. haha



Some girl wasn't paying attention. She was going at least 50 and I wasn't moving because of stupid traffic equals two totaled cars car looks like that for winter so I don't have to worry as much about the snow in the winter.

Would anybody be interested in some parts off of it? I was thinking if somebody wanted some projectors I'd sell them pretty cheap plus stockers if my body shop will let me in there, I'd hate to see those bad boys go to waste.

Womp womp





I always wanted a honda










I'm alright, but it still sucks.

Recommendations on new cars to look at?

Have any links to a similar design where all the runners go to one pipe then into the turbo? Whats "high" hp too? I've honestly never seen such a design and (in my mind) it would hurt performance to have them all dump together like you have it. Not trying to be a dick, just trying to understand where you're coming from?

looks like a quality kit! Any reason you built the manifold the way you did? I don't think I've ever seen the runners come together so quickly.

I did powder coating for a while and got customers all over the US. I posted up pictures on national motorcycle forums saying hey check out my work and instantly people wanted their stuff powder coated. I don't know of any anodizers around here so I think as long as you did some advertising and had good word of mouth you'd be ok. Also having a nice website with options, color swatches, etc really helps as well.

Sti's aren't that fast. I'd do the basic bolt ons like a boost controller, exhaust, intake, etc. I'd recommend a manual boost controller, they're super easy to install and hold rock steady. Hell my manual on my dsm holds 30psi all the way to redline and it was only 50 bucks. Use the money you saved over a fancy electronic boost controller and buy other go fast goodies.

35r is a nice sized turbo, just make sure you have all the supporting mods like people have already said. You can't just throw a big turbo at a car and expect it to make power.

Damn I already had plans to go over to my buddies house. Womp womp, sounds like I'm going to be missing out.

Blew the tranny up on my other car so I need some money

Both sides are in good condition. Only blemish is the driver side has a little mark on the turn signal, you can see what I'm talking about in the pictures. I was saving these in case I ever broke the tails I have on the car, but I'd rather have another working car instead.

$100 + shipping for both

or $60 + shipping individually





Also have an extra 7afe valve cover that came off my old motor. Its pretty beat up but would be perfect if you were having your valve cover powder coated so you wouldn't have any down time. Then you could sell it off again and not be out any money

Asking $ 55 + shipping for this






I also have a Kenne Bell boost a pump I'm willing to sell. This is perfect if anybody is running e85 and maxing out a single intank pump. I was hoping for at least another 50awhp with it from my dsm but its a universal application. Its a 20amp, single pump version and also comes with a hobbs switch so it only comes on under boost.

Looking to get $230 + shipping for this. They go for $270 brand new from Kenne Bell and this thing has only been out of the box so I can look at the instructions.



Thanks for the space!

Thats a really sweet build.

I'd be kind of scared with all those welds on the intake manifold cracking along some of those welds on high boost. What kind of boost are you planning on running or any power numbers as goals?

Amazing work again!

haha we did that to a buddies car a couple years ago. Did it outside of a restaurant and we got the funniest looks as every time the car would rev it would sound like a duck call.

I wish I could go bowling, i haven't been in forever. I have 3 finals this week I really haven't started studying for yet So I'll be stuck studying all day tomorrow after work and all week.

I'm always down to go riding when its nice out if I'm not working. What kind of bike are you hoping to pick up?

awd is good most of the time. I still spin through second when its warm out and I got all 4 to break loose last time I drove the dsm in the cold. **** was scary loosing traction going above 70. haha

I met a couple guys down on uni last year on my bike but my buddy wanted to leave so I didn't really get to talk too much. Never take the celica out cruising any more so probably nobody knows who I am.

Next time you guys hang out I'd like to come out and meet everybody. haha you guys seem really cool and easy going. Any chance of getting a ride in a 3s swapped celi?

I really like the subaru interior but they're a lot harder to work on and it costs a ton of money to make em put down good power. Good luck with whatever you pick though man, awd is a lot of fun. Maybe we can have a I used to have a 6gc meet at the track next summer.

Ohhhh, so you don't want to make power

JK, don't kill me!