6G Celicas Forums

toyota could not get the pin.. they wanted me to order the whole camshaft for 280 dollars

why would this pin just break? does anyone know?

where can i buy a knock pin for my 7afe ? its the pin that alighs the camshaft gear to the cams without it the engine spins over but it doesnt turn the cams

it started right up after i ran a ground straight to the brown wires lol but now after i started it like 10 times the starter went out lol

anyways THANKS FOR YOUR HELP it sounded wonderful with my new exhaust on there just gotta finish her up so i can get her on the road now.

if that doesnt work could i just run a ground wire to that connector?

all i know was the ground wire from the intake manifold that ran stright to the passenger side fender got hot and burned the plastic off the wire

im thinking that i hooked up a ground to the wrong thing

there is a box cover over some of the harness thats under the intake manifold and there is one wire coming out of it and i think i have it bolted to the block... i think thats a ground wire and that spot isnt a good ground so im gonna try and bolt it to the support that bolts to the intake manifold and the block

is it possible that the jdm ecu when i tried to start it and when it burned up the ground wire that ran to the passenger side fender from intake manifold that it also burned up another ground wire? maybe inside the harness

i replaced the ground wire from the intake manifold to the fender with alot bigger ground wire

http://buy1.snapon.com/catalog/item.asp?P6...amp;dir=catalog

i have a test light

Tester, Circuit, for 6 and 12V Systems, Green

and i used it to test both power and ground

i clamped onto a ground to test the power

and i clamped onto a power source to test the ground wires and none on that connector worked so somewhere i have a bad ground

im going out side to check them now stay online lol

i tested for a positive current and i was getting power pink wire , by the way i thought that plug was for the transmission not the engine? the pink wire goes into the 12pin connector that goes into the ecu...

im sorry if im being difficult im still learning alot.

what happens to a ecu if you forget to undo the battery cable when you install it?

so.... what happens to a ecu if you forget to unplug the battery?

there are Two brown wires...

yep there is no check engine light

1995 toyota celica st usdm

i just reinstalled my 7afe after ripping out the ecu wiring harness and motor
replaced the block with a jdm 7afe and used my head and intake manifold of my stock usdm
had the head reseated and reserved installed it all back in and now i have no spark?

i had some spark when i used the jdm ecu but with my stock ecu it didnt fire at all
the jdm ecu made the the ground wire on the passenger side burn up where the wire was showing so i replaced it
but now it didnt wanna fire at all. i know the jdm ecu was for coil packs but i thought i could try it anyways hopefully i didnt f something up

what do i need to do? replace ECU and Wiring harness and distributor all at once and try to start it up again?
i really dont wanna have to buy anything i dont need i did find a guy with a 94 celica st that said he would sell me his wiring harness and ecu for 150 buck


i need some help thanks

jdm engine install

my old ecu no spark after reinstall

Jdm ecu sparked at first but after i continued to try and start it it died

the engine after i put my old head back on with distributor

another pic

another pic

i do believe it will work if you can pull out the wiring harness and ecu it really would help me how much would you want for it ?

i just rebuilt my 7a and im not getting any fire... i belive it to be the ecu or wring harness it makes me mad hopefully this will fix it

im looking for a ecu and wiring harness for a 7afe m/t
my old ecu part number is 89661-2b770, 175700-5631, 12v

my old harness and ecu burned up and i need to replace it
if you have one you can call or text me at 601-678-6687

my car is a 1995 toyota celica st 5 speed

i have a 95 Toyota celica USA model, 7afe distributor type, Manuel transmission
i bout a JDM 7afe coil pack type, with ecu and wiring harness, but the ecu is for an automatic.....

will i need to get a ecu for jdm motor(coil pack type engine)and Manuel transmission?
or could i just use the ecu and deal with the check engine light?

i have a 95 toyota celica st with a JDM 7afe ecu and wiring harness.

what i need to know is im putting on a aftermarket exhaust and it only has one hole for the first o2, i would like to reprogram the ecu so i can delete the second o2 but i cant find a programer on ebay please help thanks

thanks so much does anyone know where a website is or in a forum here where someone mod there stock struts for coilovers?

because its my old car and i dont have the number to the guy that had it before me

the mazda didnt come orange...............
and i dont think they make a color orange called mazda...

i would do a 3SGTE but i dont have the cash to do a awd swap.

but later in the year i might save up for this swap. ill just get a front clip from ebay for 4500
it comes with the awd transmission rear axle and 3SGTE and right hand drive dash

i just had 1000 to threw on a motor. mine had 350k miles and was burning oil daily

what color orange? whats the name of the car paint?

sunburst orange
omaha orange
lava orange
firemist orange
eastwood GM hugger orange
california orange

?????

what is the name of this color anyone know?

i would like to lower my car 2-5 inchs with aftermarket coilovers iv done this before on my 89 Nissan 300zx, with coilovers from a 240sx. but im not sure what i need to look for on this mod. if you could please help me out, i know how to mod the struts/shocks to make the after market ones fit i just need to know how to search for some through ebay or other website.