6G Celicas Forums

Hi guys,

Sorry for not updating you all on the current state of play.

As the car is the ONLY plug we have we have been using it to display at shows, do photoshoots etc during the summer and generally drum up interest in the kit before we start to produce it.

As well as this we have been busy building a drift car so we havent had as much time as we would like to update things.

So over the winter as most of the shows are over for the year we now be taking the celica back into the workshop once the drift car is rolled out to make the primary mould in order to begin producing the kit. This process will most likely damage the paintwork hence the reason it wasn't done during show season.

We will also have a look at what we can do as regards to the front bumper, perhaps developing another one so theres some choice for people.

I can only say sorry for the delay in this kit, we hadnt expected such an interest in the kit as we have got.

Thanks

Eugene

Hi Folks,

Sorry i havent posted about this in a while but i have been busy with a few other projects including our drift car as well as shows and photoshoots of the celica.

I thought i would post a few newer pics of the car as well as the mag we got cover car of.






We are still working on getting this into production but things have been held up with all the shows etc...

Thanks for the input guys, its all appreciated, even the negative ones. I can use it for our next one.

The main thing at this stage seems to be the way the front flares out, and to be fair fron the pic i have there it looks like it flares out more than it actually does, I will try to get a video of the car and post it, this may help people get a better view of everything.

Also regarding the width, its hard to tell there but the arches are widened by approx 60mm each side.

As for prices, at this stage i'm not 100% sure but we are aiming to sell the kit for under £1000 sterling which works out approximately under $2000.

Also there are plans for a GT4 version also. Depending on how much interest we get for one.

We are drawing up a quickly growing list of names of people who are interested in a kit at the minute and it will be a first come first served basis, so anyone interested can email their name and contact details to:

info@redsmodifiedmotors.com

Thanks again for all the input guys and all opinions welcome.

Eugene

This is only the plug, thats why its all smoothed together, In the kits it will all be seperate sections. so in case of a busted light you will remove the bumper as you would on an original one.

Hi guys, i have been working on this for some time now, almost three years, but finally the car is finished. Heres some photos of the car, opinions welcome. Im planning on putting the kit into production soon, so hopefully you guys like it!





you can see more of it here: Wide Arch Celica