6G Celicas Forums

ok this is what i got, all of this is from a 91 mr2 turbo

91 3sgte head,
intake manifold with tvis,
TB,
exhaust manifold with turbo
dizzy,
MAF,
igniter,
wiring harness,
ecu.

also have a top mount intercooler that came off an all-trac

the other stuff i have is a 5sfe block that needs bored, and 5sfe crank that needs machined due to spun rod bearing. which is perfect for people that are doing 2.2 stroker. those were my big plans for my celica untill i sold it. taking offers on this stuff cause i need this stuff gone to make room in my dads garage. thanks

please email me at celica94gt@hotmail.com if you have any questions cause i dont get on this board very often so it will be easier to contact me through my email.

everything that is in the post is correct and thats the way it was when i got my header too. i just drilled out the bolts holes ofr the downpipe.

as for the gasket what i did is take a small saw blade and make like 8, 1/4 inch cuts all the way around, and then i took a pair of pliers and i rolled it back. thus making the hole bigger. its worked great on mine and celiracer's car too. i installed his too. hope this helps.

the main reason i sold my car is that im like alot of people, i have debt that needs to get paid, and there was a guy that wanted to buy on of my 4 cars that i own, and he wanted the most reliable one and looked the nicest. he offered me a little less than what i wanted but we met in the middle. so it was a deal. i didnt even really want to sell it but money talks. he wanted to buy one of my civics but all 3 of them currently have their own issues so my celica was the only one that would have worked for him.

i ran a 16.4 three times and all 3 reaction times were crappy. Should have been close to a 16 flat with good r/t's... Mods were a CAI and a short shifter.

92-95 honda civic cold air intake will work if u cut about an inch off of one side and 2 inches on the other side. thats what i had on my celica.

As the title states i sold my baby today.. Ive owned it since 2001. It will be missed, especially since the guy that bought it lives in my town so ill still see it every now and then. Maybe one day ill get back in the seat of a toyota but it will prolly a mr2. I still have all my 3s engine stuff that i havnt decided if i wanna sell yet. I might hold on to it for now just incase i find someone selling a shell for cheap. But i hate to leave this community cause this is a good forum board, all the people that are nice, as far as i know, and most everyone gets along. Ill prolly check back in every now and then to see whats goin on but for the most part im outa here. Peace everyone.

pm'd. check your messages.

yeah i dont think there any 6 gen celicas in the state, otherwise i would have got a bnch of other little things off of it already.

as the title states im look for some steering knuckles that have good bearings in them. the bearings that are in mine are garbage. id rather buy different knuckles then having to take them to some place to take the old ones out and press the new ones in. please let me know what u got. best way to contact me is through a pm cause i dont get on here that often anymore. unless someone can get me some front wheel bearings for cheap. they are around 60 a piece for them from toyota.

how much for the map sensor? pm me.

pm'd

bump

I really hate to do this but i have to let my baby go. I have a family now and need a 4 door car. Wish they kinda made a 4 door celica but it might look kinda funny. But im asking $4k or best offer. Ive got alot wrapped up into it so id like to stay close to 4. I just put a different engine in it and it runs perfest with no issues. New timing belt. I just got the new ebay chrome header on it and it really sounds good. The rims and tires are both practically brand new. Proly have less than 1,000 miles on them. The rims and tires with lug nuts (which were seperate) were close to a grand itself. Im willing to reason with price but stuff will be taken off accordingly. Then those will be sold also. I can take the rims and tires off, the carbon fiber hood, the carbon fiber spoiler blocks, and the carbon fiber fuel door, to sell it to a lower price if needed. Oh the sale of this car does not included the stereo system unless you want to pay extra for it. If u want the system then ill sell it for around 6k. I have over 4k in the system alone. So im willing to take a loss on it if anyone is interested. There is not a single lick of rust on this car. Theres a couple of small dings on the fenders which can easily be taken care of. The glass is in all but perfect condition. If you have any questions feel free to ask.

I am open to trades but keep in mind im looking for a 4 door or some tpye of SUV. Pics are in my profile unless someone wants to add them to this thread. Thanks

Id like to get 4k for it the way it sits minus the stereo. I will also go 3k for it in stock trim. I think thats a fair price.

Forgot to mention that it has a 96+ front bumper with foglights and it is a 5spd tranny.

pms replied

My buddy is selling a 95 celica gt. Its an automatic. Has the sunroof. Its all stock. Has the gt rims. Paint is kinda goldish color. Its in pretty decent condition. Has had some body work done to it, not sure what happened but its on the drivers door and the left fender. Just needs paint. Hes asking $3,000 OBO. Im located in central nebraska. The car is his DD and he takes it everywhere so its reliable. Will get pics up maybe tomorrow.

my buddy has a 95 gt auto for sale. he wants 3k for it. pm if interested.

does it have to be a convertible also. my buddy has a 95 gt auto for sale. 3k. its in decent shaped. pm me if interested

i have a stock 94 front bumper and a stock hood. they are both white in color. pics if u want just say so. leme know.

sorry for the tpyo. its a st 185 a2a.


tpyo fixed sorry for the confusion

prices up bump

bump, someone buy this stuff

4g for my gt

Im aborting my 2.2 stroker project due to lack of funds and time due to new baby. I should have almost everything to do the conversion. Just added the prices. This is what id like to get for them, they are also OBO and does not include shipping.Pics upon request.

This is what i have.

$300 - 91 mr2 3sgte head, complete with cams, valve cover.
$75 - 91 mr2 dizzy
$250 - 91 mr2 uncut engine harness
$125 - 91 mr2 usdm ECU
$50 - st185 intake mani with tvis
$35 each - 2 throttle bodys
$50 - 5sfe block that needs bored and crank that needs grinded down to match 3s rods. will come together.
$75 - 91 mr2 turbo, exhaust mani, and downpipe. turbo needs a rebuild.
pending - $80-91 mr2 afm
$50 - 91 mr2 igniter
$100 - 89 camry 3sfe complete short block. is in running condition. but would reccommend rebuild due to high miles.
$75 - 3sge camry header, needs downpipe.
$75 - fuel rail with 450cc injectors.
$50 - st185 a2a intercooler


$1,000 takes it all.

I would even consider selling my car too. $4k with out the stereo, and $7k with the stereo. Pics in profile.

I really dont wanna get rid of this stuff but i dont have time or the money for this anymore. My celi was my life and this project was my dream. Now i have a new baby girl and she is now my life.

Would also consider trades for oemside skirts, gt4 hood, gt4 bumper, projectors, jdm tails. just lemme know what u got

i got a block with crank. the block will need a small bore or a good hone, and the crank will need to br reground and would need different size bearings.

or i also got a complete engine that has a semi bad oil pump. no spun bearings or anything and the bottom end was fully rebuilt with new pistons and rings. if i had the time i would just put new bearings in it to be safe and a new oil pump and it should be a good motor. basically a small rebuild. no knocks or anything i just didnt have the time to put into it to put new oil pump on. this also has a 3sfe head on it. it kinda made it lope a little bit like it had bigger cams. it came out of a 89 camry. lemme know if interested

intrested in the autometer cobalt oil gauge. is it a a full sweep gauge or short style. and is it electrical or mechanical?

pics?

i friggin hate thieves. atleast all they did was break you window and maybe mess your dash up a bit. ive had 3 stereos stolen out of my previous cars and the value of each stereo was about $2500 a piece. i never did find out who did it. but if you find out you must break their legs.