6G Celicas Forums

Uh, have you installed a xenon kit on your jdm light? or only HID bulb ...because i would like to install on mine but i dont know if the stock h1 bulbs are the same of h1 xenon bulb ....

Hi CELICAV i bought doggy 's custom raiser block and are very good if i thik that are very customized block that are unique in the world :-) anyway fitting method are the same of the stock block and iv done all myself
now
just another pics for you

Hi bro, i have a question because im searching to know if the cable that came from the shifter in the inside of the car to the gear-box is the same from at200 to st202.. because i will have in the near future to swap my engine 7a-fe with a 3s-ge..
thx to all

ya ya.......this block are too much beautiful, because are lower than GT-4 stock block.... and just for this reason i 'v bought them....

Hy bro, i'v finally done just two pics of the inside view , of the rear window with Romas block mounted.....

hihihhi.....thx Doggy......good work.....are perfect if i think that you have created this block alone.....i think...eheh.....but i have spent a lot of time for install them...but now work is done....also the view in the rear window from inside is perfect....

.....but how will be brightness of light after installation? will be enough? can u take some pics with headlight turned on?
thx

mmmmm ...... on the first pic i remember something..... also if is a little out of focus :-) anyway .. very nice cars and pics

uh .ok sorry, well ,but i have used the holes under the front bumber with inox bolt without drill

@CoSo you mean on the rear?
anyway i dont have rear splitters , i have the Lester rear lips integrated with fiber glass to rear bumper....
really thx to all bro.

hey guys , just some old and new pics of my restyling .... look a little different

before..


and now...

still available? can fit on a 3d generation 3SGTE?

mmmmm take a look also to my pics...... i hope will like.......

[

rellay thanks to WannabeGT4

hey guys, can someone send me this serivce manual....? pleaseeee thanks for all simone5580@hotmail.com

Thx Yelloxboy, but in this pics ,you cant see the real effect, now the gauge is veery very bright... anyway for this work i had used just some high intensity led, a resistor of 550 Ohm for led, and 1 flat cable for common Hdd.... and the last thing .. much precision and time to spend for obtaining the perfect light spot....the wiring are very easy... i had take the 12v from the headlight position selector... thats all !

Hi guys,this is my new gauge cluster lamps configuration, is not the same of doggy cluster,but i like anyway

sorry for the pic..

This is my new Keychain

Hi , this are some pics at midlle resolution , but I ave also this at high resolution if needed... i hope you will like....... thx