6G Celicas Forums

looking for the interior piece that goes into the hatch (black) to cover up the trunk

Does anyone have access to a book with the torque specs for a 2nd gen 3sgte? Im needing the torque spec for the cam gears, the caps for the cams, and other misc. Please let me know. Thankyou

Does anyone know if 3rd gen 3sgte injectors will fit a 2nd gen 3sgte motor/fuel rail?

dude Im not being a dick. The car came from japan as an ST202 with a 3sfe motor. Maybe they have different combos in japan so dont go by just what you can buy in the dealership at your local toyota in the US. It is an import after all.

First of all where did you read I have a 7a engine. The model is an ST202 that is right off the metal plate underhood. Second of all I didnt mean to call you an idiot. But If a person would take that extra second before commenting on something they dont know about the world would be a greater place. I was putting this post up for the australians and the europeans to see if any of them would have access to the parts since they are obviously not available in the states for such a rare project. No offense given or taken.

Are you an idiot. The car is already a legal rhd import. Check out my profile. Not trying to be a jerk but come on.

bump

I got it from a guy in florida.

Im here in the states and doing a conversion. Problem is, as far as I can see or find, no one in the states has done a conversion on a rhd. Im trying to get some insight the process is close to the same but the steering linkage looks like it will get in the way. Looking for some photos and info.

Rebuilding a 3sgte for my swap. The question I have is whats the difference between the two pulleys they are the same size and have the same size bolt hole, but I can only get the idler pulley from the parts store. Is there a big difference and how does a person know when to replace?

Just letting everyone here know there will be a benifit car show and stereo competition on April 30th. http://forums.importatlanta.com/showthread.php?t=41789. Copy and paste to see all the attention this show is getting. IASCA and USACI will both be there along with a great car show and trophies. All proceeds will be going to a great cause so if looking for a great time will see you there. Any questions dont hesitate to call me at 706-781-9352 I will answer your question ar get you an answer.

Looking for a 5 spd shifter and trim. Thought Id be able to use from a 5gen celi but no good. Please let me know price.

Well starting the swap. I figured Id get some new toys to play with. Ive already got a T3/T4 turbo and trying to find a new manifold for the 3sgte. Everyone says ssautochrome sux. Has anyone heard of someone using the OBX manifolds and had any good luck? Also looking at some Fidanza cam gears, F1 stage 3 Clutch kit and F1 lightened flywheel, a greddy hp timing belt and a HP Cometic head gasket? If anybody has any comments or insight to the above items please advise. Also replacing all gaskets and seals and water pump. Thanks again.

anybody try any of these items from this guy.Ebay item # 8049478530 Also I keep hearing ssautochrome sux. love fab cant answer a phone and neither will truboost. Only place I can get price is $475 for a turbonetics manifold and still need a downpipe any idea??

anybody got a clue on the wiring????????

I appreciate the info on the motor mounts. I will be swapping the tranny to a manual just because who wants a 3sgte motor with an auto tranny!! Besides what a great security system, who else will be able to drive a right hand car with a 5 speed tranny. I believe the tranny is from a mr2, that I will be swapping into the car. It came from a 90 celica with a swap done to it. Ant ideas on the wiring. That is my biggest fear on doing the swap myself.

I bought from a guy in florida about a year and a 1/2 ago on ebay.

Mine is a from japan st202 3sfe

Just a few questions I have searched the web for some answers and have found nothing. I know not many 6 gen celicas came with a 3sfe. So not a lot of info on a swap for the motor or tranny or even the wiring. Most of the cars I have been reading about are st205. Is there that big of a difference for a st202? Any help would be greatly appreciated. Found a wiring harness on this site from Top Fuel,but cant find a web site to see if it will work for my st202 (3sfe). Are the motor mounts and tranny mounts going to be different? Another quick question how can I tell what my tranny(the 5spd) is and where it came from. Is there a plate on it or something that would be unique from one another??

Try looking into some BATCAP batteries

1. Jgreening (Jay)
2. Batman722 (Dustin)
3. Defgeph (Jeff)
4. gt_driFFter (Josh)
5. playr(daniel)
6. purplegt4 (dRew)
7. presure2 (jenn & manny)
8. Streetracing10psi (James)
9. celi_gt_racer (matt)
10. Celicav (Jonathan)
11. Macavely (mac)
12. Shin (shin )
13. Alexander ( )
14. Jen
15. rhcelica (sam)

Maybe list:

1. JawsforGod ( )
2. Silver94CelicaOwner ( )
3. Ethnykceli ( )
4. 97lestyousay ( )
5. celiracer ( )
6. Valo666 ( )

seems to fit better with stock bumper on also. Thats why Im asking?

With the aggressor body kit. Do you need to remove rear bumper or just fit body kit over? Also is the bumper from a coupe different than a hatch?

bump

anyone????????????

Trying to find a 3s-gte head.Let me know. Trying to do something different